New Adhesives & Sealants Products

Adhesive/Sealant has service range of -75 to 500-

Polymer System X5HT one component, contact type adhesive/sealant offers dimensional stability and creep- and chemical-resistance. Curing process requires application to each substrate, application of pressure (less than 50 psi), and curing at 300 to 400Ã-

Adhesive Tape suits direct skin applications.

Medical-grade, single-coated, pressure-sensitive BioflexÃ-® Rx100P is breathable, conformable, and lightweight, making it suitable for TENS, EKG electrode, and bandage applications. It consists of white, spunlaced polyester fabric, coated on one side with acrylic adhesive that carries Device Master Fiber number with Bureau of Medical Devices. Tape is supplied on white, polycoated, stay-flat,...

Bonding Tape comes in .090 in. thickness.

Part of NormountÃ-® V2800 Series, closed-cell urethane foam has aggressive acrylic adhesive on both sides. It provides energy dissipating qualities, and can be used in place of mechanical fasteners in large-gap joining applications.

Ceramic Adhesive bonds at high temperatures.

Ceramabond(TM) 685N bonds ceramics and metals in temperatures up to 2500Ã-

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Adhesive suits pressure-sensitive applications.

Designed in 4 x 4 in. blocks, for use with melt pots and large bulk systems, non-toxic Formula 298-404 hot-melt spray adhesive provides single-surface bonding within 30 seconds and tack times from 1 min. With output yield rated to 48 ftÃ-², formula can be applied to large substrates where temperature resistance is of concern. Viscosity at 350Ã-

Tapes bonds metal before or after painting.

3M(TM) VHB(TM) tape families enable OEMs to join materials before or after powder-coating process. They provide seal, vibration damping, thermal expansion allowance, and bond differential substrates. Tapes can replace spot welds in metal assembly applications, prior to most paint systems, or replace rivets or screws by bonding to most powder coatings after painting process. Applications include...

Adhesive contains additive for difficult substrates.

Polyurethane, reactive, hot-melt PUR-FECT LOKÃ-® 34-943A provides better green strength for springy substrates. It is formulated for vinyl laminating, panel bonding, and assembly bonding. Dye additive permits visibility under UV light source to indicate if optimum amount of adhesive is being applied. Moisture-curing, 100% solids adhesive can be applied by spray, roll coater, or slot coater...

Epoxy System is approved for NASA outgassing specifications.

With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10-6 in./in. per Ã-

Gap Filler Materials reduce stress on solder joints.

Form-in-place, fully cured, thermally conductive THERM-A-GAPÃ-® T630 and T630G provide conformable thermal path between hot components and heat spreaders. Dispensable T630 and T630G viscoelastic pastes achieve 50% deflection at 1 psi. T630G material contains added filler of 0.010 in. dia glass beads. Both gap fillers provide thermal conductivity of 0.7 W/m-K and are capable of filling gaps...

Acrylic Resin improves PVC substrate appearance.

SolarkoteÃ-® PB, when blended with PVC and coextruded over PVC as capstock, upgrades PVC properties for exterior building products. It blends to share weathering performance in medium-dark colors where chalking can be a concern. It exhibits color hold in whites, and can be blended in PVC high-shear blending equipment. Applications include PVC siding, window profiles, fencing, and decking.