UV Curing Adhesive is chemical-resistant.
AngstromBondÃ-® AB9031 epoxy based system contains optical silica filler. Creamy paste can be dispensed through syringes or automated cartridges. It bonds to metals, ceramic, silicon, plastics, and glass. Product passes specifications including 1,000 hours in 85/85 environment. Product is suitable for optical bonding and sealing applications where alignment must be maintained during thermal...
Read More »
Ceramic Coating seals thermal spray coatings.
Ceramacoat(TM) 503-VFG-S ceramic-based sealant is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically resistant, inorganic material does not outgas or decompose in high temperature corrosive applications to 3200-°F. Applied using sponge brush or pneumatic spray equipment, full cure is achieved after exposure for 1-2 hours at 700-°F. It sinters and strengthens...
Read More »Sprayable Adhesive is VOC compliant.
Scotch-Grip(TM) Industrial Adhesive 4491 features rubber/resin blend that resists weathering, water, fuel, oil, and plasticizers. Solvent-based product contains no Hazardous Air Pollutants and meets 250 grams/liter Volatile Organic Compound limit. Product bonds wood, metal, vinyl, foam, leather, fabrics, rubbers, FRP, acrylic, nylon, and many other plastics.
Read More »
Hot Melt Case Former offers tape sealing option.
Convertible case former can switch sealing mechanisms (from hot-melt glue to pressure-sensitive tape) with drop-in cartridge that sets up in minutes. Model WF2H suits packagers and contract packagers that require corrugated case and tray forming and sealing. Convertible WF2 case former series incorporates pin & dome positive case opening technology. It handles all weights and plies of board...
Read More »
How to Choose the Right Adhesive Tape for Your Application
With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.
Read More »
Liquid Adhesive cleans up with water.
BONDMASTERÃ-® 40-0857 polyvinyl, emulsion adhesive exhibits the following surface burning characteristics: flame spread, 10; fuel contributed, 0; and smoke density, 0. Adhesive may be applied using direct roll coater or spraying to facing and contains ingredient that kills mildew for protection against fungus, bacteria, and mold. It laminates foil, vinyl, and composite facings to glass...
Read More »
Decuffer/Sealing Machine operates in automated packing lines.
PBD Poly Bag Decuffer/Package Top Sealing Machine mechanically decuffs and progressively folds poly bag to form double plastic cover over product. It can handle knocked down case sizes of 24, 32, and 42 in. Machine is designed for continuous operation and is available in stainless steel and coated models to meet USDA and special environmental requirements.
Read More »
Adhesive offers working time of 90 min at room temperature.
PlexusÃ-® MA557 2-part methacrylate adhesive is designed for structural bonding of composites, thermoplastics, and thermosets. Mixed as dispensed at 10:1 ratio, adhesive cures to tensile strength of 2200-2500 psi, providing fatigue endurance and impact resistance. It resists hydrocarbons, salt solutions, and acids and bases in solution (3-10 pH). MA557 eliminates problems associated with...
Read More »
Adhesives for use in permanent magnet motors.
Line includes structural acrylics, 1- and 2-part epoxies, UV curable, cyanoacrylates, and anaerobic adhesives. Permabond E04 (2-part epoxy) and 465 (UV curable) are both used for wire tang reinforcements. E32 (2-part epoxy), ESP310 (1-part, heat cured epoxy), 681 (2-part acrylic), 581 (1-part acrylic used with 534 activator), 671 (2-part acrylic), and 533 (1-part acrylic used with 534 activator)...
Read More »Adhesive Systems seal and cover molecular devices.
Low fluorescence adhesives provide sealing and cover constructions for microfluidic devices and bioarrays. Adhesives are dimensionally stable and will not flow into microfluidic channels. They will adhere to base plate without creating voids or gaps that may allow migration of components from one channel to adjacent channel, and they exhibit good stability to moisture and temperature change....
Read More »Epoxy System fills crevices to 18 in. deep.
FixmasterÃ-® Super Grout pourable, aggregate-filled epoxy withstands high torque loading and contains 100 percent solids. Non-shrinking and chemical/corrosion-resistant, it suits self-leveling applications under rails and sole plates. Once mixed, epoxy compound is red in color. Each 5-gallon kit covers 620 cubic inches. Typical applications include diesel or gas engines, generators, cone...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
