Pressure Sensitive Adhesive comes in several variations.
MACbondÃ-®, high-tack, double coated PSA allows for customization. Family of rubber and acrylic free films suits medium/high-energy surface bonding (IF-2010); high-temperature, aggressive adhesion (IF-2070); bonding to low surface energy materials (IF-2090); and very high-temperature applications (IF-3070). Suitable for mounting, bonding, and laminating, MACmountÃ-®, double-coated,...
Read More »Hot Melt Adhesive contains UV dye and has UL723 approval.
With 0/0 rating for flame propagation and smoke generation, PUR-FECT LOKÃ-® 34-196A, 100% solids adhesive has appearance of translucent solid. Moisture curing product provides immediate handling strength, deflection resistance, and ability to run cleanly at 250Ã-
Read More »Threadlocker/Sealant replaces lockwashers.
PERMABONDÃ-® HH120 seals fasteners against water and chemicals. It obtains fixture strength in 15-20 min on active metals such as iron, steel, nickel, and aluminum. Viscosity is 7000 cp, allowing for gap filling up to 10 mil. HH120 features locking strength of 250-350 lb-in. and retaining strength of over 2000 psi. It is suitable for locking bolts, nuts, and screws for permanent assembly, and...
Read More »Capstock Resin provides UV protection for ABS substrates.
Solarkote A acrylic capstock resin, in layers as thin as 6 mil, screens out UV radiation. Suited for coextruded applications, resin can also be used on watercraft, recreational vehicles, lawn/garden products, building/construction, automotive accessories, outdoor enclosures, tubs, spas, and pool accessories.
Read More »Adhesive Tapes for Personal Protective Equipment Applications
This ebook provides an in-depth overview into adhesive tapes for personal equipment applications.
Read More »Pourable Epoxies suit moldmaking applications.
High-Temp Moldmaker (C-1) heat-cured epoxy liquid maintains compressive strength to 36,500 psi at operating temperatures up to 500Ã-
Read More »Conductive Silicones provide EMI/RFI shielding.
BISCOÃ-® EC-2000 Series Conductive Silicones are nickel-graphite filled materials offering compression-set, flame and corrosion resistance. They come in wide continuous roll goods in thicknesses from 0.020 to 0.125 in., making them suitable for replacing fabric-over-foam in intricately shaped applications. EC-2000 products fall in 30-40 Shore A durometer range and are suitable for base...
Read More »Acrylic Capstock adds weather resistance to polystyrene.
SolarkoteÃ-® H resin enhances appearance of high impact polystyrene sheet (HIPS) via co-extrusion. Cap layer of 6 to 12 mil provides protection from ultraviolet light, without sacrificing impact performance of composite sheet. Co-extruded layer is inherently colorless, but may be readily colored. It maintains high visible light transmission, permitting wet appearance. Applications include...
Read More »Instant Adhesive resists shock and vibration.
MB297FL single component cyanoacrylate adhesive has operating temperature range of -65 to +185Ã-
Read More »Sealant penetrates porosity in powder metals.
LoctiteÃ-® PM 5120 plating grade sealant is intended for shallow penetration to seal against low pressure plating operations. Durable enough to resist strong acids and bases at low temperatures, sealant is formulated for controlled cure at room temperature on active metal substrates to avoid bleed out. Fluorescent dye facilitates cross-sectional inspection. Loctite PM 5120 is easy to recover...
Read More »Palletizing Adhesives are water based and non-toxic.
Lock n'Pop Palletizing Adhesives offer alternative to stretch-wrap, corner boards, tier sheets, and dunnage used for unitizing corrugated boxes, multi-wall paper and poly bags, and shrink-wrapped trays. They keep products from sliding side-to-side during shipping. Unlike stretch-wrap, adhesive continues to stabilize partial pallets down to bottom tier. Formulations leave no sticky residue and...
Read More »TPA Motion Introduces New Curved Linear Rail Guides: the CR40 Series
For the ultimate in precision open and closed loop guided motion systems, TPA Motion is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.
Read More »