Epoxies

Non-Sag, Thermally Conductive Epoxy Adhesive

With thick paste consistency, Epoxyset's EB-403-1LV-T1 bonds to diverse substrates including metals, composites, glass, ceramics, rubbers, plastics and will not run or sag even when applied to vertical surfaces even at elevated temperatures. Bonds resist thermal cycling, autoclave, as well as chemicals, including water, oils, fuels, acids, bases, and salts. This one component epoxy requires no...

Read More »
Resins

Silicone Intermediate is available for food-contact applications.

Solventless liquid silicone resin, Dow Corning® 3074 Intermediate, blends with organic or other silicone resins to extend and improve processability and performance of coating systems. Specifically, solution provides high-temperature resistance, durability, and weatherability for range of coating formulations while minimizing release of VOCs. Reactive methoxy functionality makes this...

Read More »
Novel Revivent(TM) Myocardial Anchoring System from BioVentrix Uses Solvay's Zeniva® PEEK in Tether Component
Resins

Novel Revivent(TM) Myocardial Anchoring System from BioVentrix Uses Solvay's Zeniva® PEEK in Tether Component

Thermoplastic Biomaterial Delivers High Strength and Biocompatibility in New Surgical Implant for Heart Failure Patients ALPHARETTA, Ga. – BioVentrix’s innovative Revivent™ Myocardial Anchoring System for the treatment of congestive heart failure features a tether component made of Zeniva® polyetheretherketone (PEEK) resin from Solvay Specialty Polymers for high strength and...

Read More »
Hoerbiger Uses Solvay's KetaSpire® PEEK for High-Performance Compressor Plates
Resins

Hoerbiger Uses Solvay's KetaSpire® PEEK for High-Performance Compressor Plates

Glass Fiber Reinforced Grade Meets Demanding Heat, Chemical, and Fatigue Resistance Requirements ALPHARETTA, Ga. –Â- Austria-based Hoerbiger, a leading global supplier of compressor components and services, produces reciprocating compressor valve plates (also known as valve sealing elements) and wear-resistant rings and packings utilizing KetaSpire® polyetheretherketone (PEEK) resin...

Read More »
Bonders

Ultrasonic Technology Gains Favor with Major Body Armor Manufacturers for Achieving Compliance with NIJ Waterproof Standards

Sonobond's SeamMaster™ High Profile Ultrasonic Sewing Machine to be Featured at SHOT Show, in Las Vegas, January 14-17, 2014 WEST CHESTER, Pennsylvania – Ultrasonic technology is increasingly being used as an assembly method for body armor – and the machine of choice for virtually every major manufacturer is Sonobond's SeamMaster High Profile Ultrasonic Sewing Machine. One of the reasons...

Read More »
Fillers

Saint-Gobain's CarboTherm(TM) Boron Nitride Fillers for Thermally Conductive, Dielectric Polymers on Display at Compounding World Forum 2013

Amherst, NYÂ- – Saint-Gobain Ceramic Materials, a pioneer in advanced material solutions, announced today that its range of CarboTherm™ boron nitride thermal management fillers will be on display at the upcoming Compounding World Forum 2013, December 10-11, Booth #2, Hilton City Avenue, Philadelphia. CarboTherm Boron Nitride fillers enable manufacturing of thermally conductive,...

Read More »
Resealing Expansion Joints at Meadowhall Centre in the U.K.
Sealants

Resealing Expansion Joints at Meadowhall Centre in the U.K.

In spite of all of its design and engineering awards, Meadowhall Centre had a problem. Over a decade of traffic had exposed the reality that the Suffix complex's parking structure was leaking. Unfortunately, this situation was not unique. Car parks all over the world are leaking every day primarily due to the use of the outdated sealing technology inherent to extruded rubber sealing glands which...

Read More »
Adhesives

Interior Maintenance adds Capacity in HVAC Energy Savings

Interior Maintenance Company (IMC) is proud to announce its association with Aeroseal technology to allow us to more easily identify and seal air duct leaks.Â-  Recognizing our customer's concerns with energy loss, odor control, and indoor air quality, IMC has incorporated this process to assist in solving these HVAC related problems. With this new addition to our services, Aeroseal...

Read More »
Wire Drawing Surface Treatment has no Borax or Phosphate.
Wire Drawing Compounds

Wire Drawing Surface Treatment has no Borax or Phosphate.

Supplied in powder form, VICAFIL TS 7112 is diluted in hot water bath and contains mineral salts classified as non-toxic. Mineral salts and organic-polymers of VICAFIL TS 7112 crystallize quickly on wire, creating optimal coverage and greater deposit weight, ensuring adherence and distribution of lubricant during wiredrawing operation. This results in accelerated wiredrawing speeds, minimized die...

Read More »
Adhesives

UPM Raflatac Renews Its Removable Adhesive Portfolio with RR19 and RR12

UPM Raflatac announces the renewal of its removable adhesives portfolio with the addition of RR19 and RR12. Labelstocks constructed with these adhesives provide good initial tack and lasting adhesion to a wide array of substrates, yet offer excellent long-term removability. Products constructed with UPM Raflatac's RR19 and RR12 are go-to" for versatility and removability, as they can be used in a...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics