New Mechanical Power Transmission Products

Engine meets Tier 2 and Stage II standards for emissions.

Model C-9, 8.8-liter, in-line, 6-cylinder, air-to-air aftercooled industrial engine offers Caterpillar ADEM(TM) III controller and HEUI(TM)-B fuel system. HEUI fuel system utilizes hydraulically actuated, electronically controlled unit injectors. The 350 hp C-9 is also available with ratings from 275 to 335 hp, and operates at 1800 to 2200 rpm for industrial applications.

Servo Gearhead has compact right angle design.

V-Drive series right angle gearheads for servo motor applications are available in 4 frame sizes with continuous output torque ratings of 39 to 1072 Nm, ratios from 4:1 to 40:1, and 6 different output styles. Outputs include flange mount output, hollow shaft smooth, hollow shaft keyed, shaft mount smooth, shaft mount keyed, and spline shaft option for rack and pinion applications. Drive comes...

Trunnion Machine adapts to changing needs.

High Performance Trunnion (HPT) Machine features sliding spindle carriers that allow most cutting tools to be changed outside machine base in less than 1 minute. HPT is available with spindle horsepower of 5, 7.5 and 10 HP. Eight workholding stations are standard, and each is equipped with 2-jaw chuck that can use interchangeable top jaws. Control system uses IndramatÃ-® CNC and...

Air Actuators provide gentle handling of delicate parts.

PNRE Series friction-free actuators require less than 10 psi to operate. Light touch or physical obstruction will stop unit's movement before it can damage equipment and parts. Using bearing system containing cylindrical steel rollers, carriage glides almost friction-free over base. Slide assembly is controlled by pair of Airpot Dashpots. Three models are available with travel of 0.5, 1.0, and...

A Complete Guide to Aerospace Metal Fabrication eBook

Check out this eBook to learn all about aerospace metal fabrication - materials, processes, and applications.

Gearmotors now come in smaller sizes.

New models in Clincher(TM) line of parallel shaft-mount gearmotors and speed reducers include: SK0182NB with gear ratios from 4.24:1 to 81.0:1, output speeds to 413 rpm and torque up to 1,027 lb-in.; SK0282NB with ratio from 4.03:1 to 139.0:1, output speeds to 434 rpm and torque to 1,443 lb-in.; and SK1382NB with ratios from 16.28:1 to over 381.0:1, output speeds to 107 rpm and torque to 3,275...

Alignment Kit measures machinery.

Microgage provides precise measurements of machinery straightness, surface flatness, rail and slide parallelism, and squareness of equipment. It consists of compact laser transmitter and digital receiver that captures laser reference beam and provides digital readout of laser's position. Placing laser on moving slide or table allows digital receiver to measure worn areas, locations where binding...

Gearheads have no backlash.

Lightweight PSA-G harmonic drive gearheads provide zero-backlash speed reduction for accurate angular positioning. Input-to-output gear ratios from 50:1 to 100:1 are available. They handle high axial and overhung loads, making them suitable for automation applications such as robotics and handling small components in assembly process. Maximum radial shaft loading is up to 115 lb. Gearheads are...

Linear Motor offers high force-density operation.

Direct-drive, brushless, DC Model 4020-6 incorporates single integral moving shaft and measures 6.2 in. OD by 6.9 in. long. Alternating polarity neodymium-iron-boron magnets deliver force of 1125 lbf at peak, DC current of 30 A, and peak power of 5.2 kW. Built-in bearing system incorporates self-contained structure in stroke lengths of 2, 4, 6, 8, 10 and 12 in. Linear resolver, encoder, and...

Seal Plates facilitate O-ring installation.

Code 61 and Code 62 Seal Plates provide proper alignment and squeeze on O-rings when joining 2 surfaces. Outer diameter is grooved to center and improves O-rings' loading. Plates incorporate optional integrity support rings for structural support of 2 inner joined surfaces. These support rings eliminate seal damage.

Microstepping Motor/Driver provides high-accuracy positioning.

Modular, open-framed Nanostep(R) CFKII Series 5-phase microstepping motor and driver is available in high-torque motor frame sizes: 1.1, 1.65, 2.36, and 3.35 in. sq. Holding torques range from 4.6 oz-in. (CFK533AT) to 890 oz-in. (CFK5913HAT), and position accuracy is rated at +/-3 arc-minutes. Unit provides 16 user-selectable resolution settings up to 125,000 steps per revolution. Open-loop...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.