ZF TRW's Innovative Integrated Brake Control System to Launch in High Volume in 2018
Controls and Controllers

ZF TRW's Innovative Integrated Brake Control System to Launch in High Volume in 2018

LIVONIA, Mich. • The Integrated Brake Control system will be implemented in high volume by a major vehicle manufacturer • Combines conventional braking components and functional control into a single unit offering enhanced performance across a full range of light duty vehicles • Will help meet increased requirements for fuel efficiency/CO(2), advanced safety systems such as Automatic...

Read More »
Low-Flow Load-Sensing Valve integrates electrohydraulic actuator.
Valves

Low-Flow Load-Sensing Valve integrates electrohydraulic actuator.

Helping system designers meet emissions and safety standards, PVG 16 low-flow load-sensing valve with CAN (PVE-CI)-enabled PVE Series 6 electrohydraulic actuator is availableÂ- in on/off, proportional, and proportional with float actuator configurations. PVE Series 6 actuator incorporates MCU for closed loop spool position control and delivers total spool controllability and...

Read More »
Two-Phase Stepper Motor incorporates original encoder.
Motors

Two-Phase Stepper Motor incorporates original encoder.

Pre-assembled with Oriental Motor Original Encoders, PKP Series includes bipolar and unipolar motors.Â- Oriental Motor Original Encoder specifications include 3-channel, incremental or line driver type, 200 p/rev for 1.8°, and 400 p/rev for 0.9° type. Respective frame sizes are 0.79–1.65 in. and 1.65 or 2.22 in. Motor position information detection is also included....

Read More »
Engines

ISL G Near Zero Natural Gas Engine Certified to Near Zero Emissions

First MidRange engine in North America to reduce NOx emissions by 90% from EPA 2010 VANCOUVER - Cummins Westport Inc. (CWI) today announced the new ISL G Near Zero (NZ) NOx natural gas engine is the first MidRange engine in North America to receive emission certifications from both U.S. Environmental Protection Agency (EPA) and Air Resources Board (ARB) in California that meet the 0.02 g/bhp-hr...

Read More »
Support and Actuator System works in ultra-high vacuum conditions.
Actuators

Support and Actuator System works in ultra-high vacuum conditions.

Optimized for load capacity and stiffness, mechanical systems employ strut-based mounting system that minimizes vibration and allows facilitated and precise (sub millimeter) position adjustment of hardware without adding stress or distortion. Strut mechanical positioner has up toÂ- 6 degrees of freedom: translational (X/Y/Z) and angular (pitch, roll, and yaw). While smallest design supports...

Read More »
Automation Systems

Magellan Aerospace to Provide Landing Gear Assemblies to Messier-Bugatti-Dowty

TORONTO - Magellan Aerospace ( Magellan") announced today that it has been awarded a follow on contract to provide nose and main landing gear components and kitted assemblies to Messier-Bugatti-Dowty ("MBD") for major commercial aircraft customers. Magellan has produced these complex machined components for MBD since 2009. The parts are manufactured in Magellan's divisions in New York, New...

Read More »
DC Brush and Brushless Motors, Encoders aid agriculture industry.
Motors

DC Brush and Brushless Motors, Encoders aid agriculture industry.

Available inÂ- 3 motor lengths with output ratings of 8–30 W, 30 mm dia DC030C series offers gear reduction options that include G35 spur gearbox and G30 planetary gearbox with respective load torque ratings of 0.71–1.24 Nm and 2.47–8.83 Nm. Offered in 7 motor lengths with output ratings of 25–108 W, 54 mm dia DC054B series offers gear reduction options that include G51 spur gearbox...

Read More »
Weld-On Plate enhances John Deere 500 Series loader functionality.
Steel

Weld-On Plate enhances John Deere 500 Series loader functionality.

Measuring 49.38 x 22.85 in., John Deere 500 Series Weld-on Plate is formed from 5/16” steel, designed to be welded to existing attachments, and interfaces with John Deere 500 Series loaders that use JD attaching system. Features, including steel cast upper hooks and welded locking pins spaced to OEM specifications, ensure proper fit when welded to buckets or attachments.  

Read More »
Parker Hannifin Extends Range of AC10 VFD to 250 HP
Controls and Controllers

Parker Hannifin Extends Range of AC10 VFD to 250 HP

Charlotte, NCÂ- – The Parker AC10 Variable Frequency Drive, a simple, reliable and economical AC motor speed control, is now available through 250 HP. With features normally only associated with higher specification drives, including sensorless vector mode, output frequency up to 590Hz, and a full 150% overload at 0.5 Hz for 1 minute, AC10 provides an optimized solution for machine...

Read More »
Disc Brake Rotors ensure silent brake operation.
Brakes

Disc Brake Rotors ensure silent brake operation.

Designed to deliver motorsports performance in wide range of everyday road vehicles, HELLA Pagid High Carbon Rotors deliver maximum density for silent brake operation. Rotors are coated toÂ- ensure corrosion protection and provide optimized heat transfer for cooler running brake system. Friction consistency minimizes risk of stress cracks and permanent deformation....

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics