New Mechanical Power Transmission Products

AC Brakes are wired directly to input of motor.

Temporiti power-off brakes are designed to hold load or to stop load completely when power is shut off. Nine sizes are available with torques from 3 to 220 lb-ft. Voltages include 208, 230, 460, and 575 Vac. Brakes offer quiet operation (

Cam Clamps suit machine shop applications.

Series HDC Heavy Duty Cam Clamps withstand continuous industrial use while providing significant speed benefits over conventional strap clamps in repetitive machining tasks. Styles include both clockwise and counter-clockwise clamping actions, hand or mallet applied actuation, and cam-swing or cam-ram design. Clamping force is from 675 to 11,200 lbs.

Nanostep Drivers provide 500,000 steps/rev.

INS50 and INS500 ac enclosed and dc unenclosed drivers, respectively, are programmable from 1/1 step to 1/1000 step in 16 resolution settings, and can drive all of company's NEMA size 17 to 34 high torque five-phase motors rated 1.4 to 2.8 A. INS50 integrates 100 to 120 Vac input while INS500 is operated from 24 Vdc power supply. Both are bipolar constant current chopper drivers that maintain...

Suspension requires 24.75 in. package space.

ComposiLite(TM) 13,200 lb. capacity suspension weighs 812 lbs. It utilizes ParaLift(TM) Ultra design, and is constructed of corrosive-resistant aluminum, composite tie-rod, and in-line air springs. ComposiLite measures 24.75 in. from front edge of hanger to centerline of axle and provides 8 in. of lift, 2 in. of total axle travel, and wheel cut of 27 deg.

Wear - What Wears in Electromagnetic Brakes

Learn the common causes of wear for "fail-safe" brakes and how to prevent wear for safe use.

Sealed Bearings incorporate CERBEC balls.

Fafnir(R) True High Speed Sealed Bearings (THSS), with CERBEC silicon nitride ceramic balls, are designed for machine tool spindles. Non-contact seals keep out contamination and retain grease inside bearing. Bearings reduce heat generation to increase speeds up to 600,000 DN.

Hydraulic Piston Pump works quietly at high pressures.

Compact XL75 open circuit 75 cc/rev displacement pump operates at 4,060 psi. It has smooth, rounded construction, with no drum-type surfaces to amplify noise. Pump has hydrostatic bearings and O-ring seals rather than gaskets. Applications include plastics machines, die casters, presses, power units, aerospace test stands, tractors, front end loaders, scrapers, dozers, heavy duty fork lifts, haul...

Direct Drive handles oversized, mismatched loads.

SilverMax(TM) combines controller, driver, encoder, and ac brushless motor into single integrated package that can direct drive oversized inertial loads such as flywheels and belt driven slides. It is available in NEMA 17, 23, and 34 sizes, with UL/CE marks in both IP50 and IP65 ratings. PVIA(TM) control provides greater stability and accuracy than traditional PID servo control and achieves 100:1...

Hydraulic Actuators have threaded body mounting.

Miniature short stroke, hydraulic actuators suit installations where space is limited on jigs, fixtures, molds, general purpose tooling, and O.E.M. applications. Fluid lines and fittings are located at rear and are isolated from work area. Force output is rated from 1 to 3 tons in 5 models rated at 3,000 psi. Design offers leak-proof SAE ports and polyurethane lip seals on fine...

Diesel Engines meet emissions requirements.

Series 1100 diesel engines conform to EU and North America Stage 2/Tier 2 off-highway emissions requirements. Family includes 3.3 liter 4-cylinder engine which is available in naturally aspirated and turbocharged forms with up to 65 hp @ 2100 rpm; Model 1104C-44, rated at 86 hp @ 2400 rpm; and 6 liter, turbocharged, air to air charged cooled 1106C-E60TA which offers 174 hp @ 2400 rpm. Full...

Engine offers compact dimensions.

Model 403C-11 0.10 cubic meter engine features 1.1 liter capacity and provides output power of 19.5 kW (26.1 bhp) at 3000 rpm. Three cylinder, indirect injection engine is naturally aspirated.

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!