
New Edelmann Elite Power Steering Program Eliminates Warranty Issues and Core Headaches
Every hard part is etched with a designated numeric asset identification number that matches test inspection report. Filter uses advanced dual filtration technology that prevents contamination and delivers high capacity flow. Hoses feature good impulse durability and are resistant to oil, heat and ozone.
Read More »
New F600 Pump Drive Saves Energy and Optimizes System
Available in wide power range, from 1.5 HP (1.1kW) to 4,200 HP (2.8MW). Features include sleep mode and motor control technology that initiates dynamic modification of the rated frequency. Ideal for all applications at any power within the water, agriculture, industrial heating and cooling, food and beverage industries.
Read More »
New CSF-ULW Gearhead Features Zero Backlash and High Torsional Stiffness
Provides high efficiency and smooth operation as well as accuracy <1 arc-min. Features robust cross roller output bearing and available in two sizes, with three reduction ratio’s per size. Ideal for use on end of arm axes for small industrial and collaborative robots.
Read More »
New HPN-RA Harmonic Planetary Gearhead Offers 9Nm to 752Nm Peak Torque and 3:1 to 50:1 Ratios
Features helical gears with backlash of <6 arc minutes (for single stage) and <9 arc minutes (two stage) for the life of the gear. Available with smooth output shaft or shaft with a key and tapped center hole. Comes with short lead times and is designed to couple to any servo or stepper motor with our Quick Connect® mounting system.
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
New Ultra-lightweight Gearhead Features High Accuracy and Zero Backlash
CSF-ULW series is available with 30:1, 50:1 and 100:1 reduction ratios. Available with outer diameter of φ 42.5 mm and 50.5 mm. Ideal for use on end of arm axes for small industrial and collaborative robots.
Read More »
New HPN-RA Harmonic Planetary Gearheads are Suitable for Precision Motion Control and Servo Grade Positioning
Available in 5 frame sizes: 11, 14, 20, 32, and 40 with reduction ratios ranging from 3:1 to 50:1. Feature robust design that utilizes helical gears for quiet performance and long life. Come with short lead times and are designed to couple to any servo motor with Quick-Connect coupling system.
Read More »
New IP65 Rated Angle Gear Drives are Ideal for Food Processing and Food Packaging Applications
Feature nickel plated housing for corrosion protection and are available in 1:1 and 2:1 ratios and 2-way, 3-way, and counter-rotating shaft configurations. Include precision hardened and ground ball bearings, and grease lubrication to ensure optimum performance in temperature ranges from -20° C to +100° C. Capable of speeds up to 2000 rpm that offer heat treated AGMA class 10 spiral bevel gears...
Read More »
New Planetary Gearboxes Come in Four Modules with Different Numbers of Teeth
Available with PK1 and PM1 pinion with helical cut. Offer torsional stiffness of the flanged gearboxes and is greater than that of gearboxes with an output shaft. Ideal for rack and pinion drives, with an additional option for a fitted pinion from its in-house production.
Read More »
New GPT Planetary Gearhead is Equipped with up to Four Reduction Stages
Offers input speed above 10’000 rpm, and can support input speeds up to 20,000 rpm in intermittent mode. Can sustain intermittent torque up to 25 Nm while its length is squeezed down to 71 mm. Available with diameters of 22, 32 and 42 mm., and feature torque and speed of numerous gear ratios.
Read More »
New HPG Planetary Gearheads Deliver Max Power Density
Comes with Quick-Connect design for mounting to wide variety of servomotors. Features High accuracy helical rack and pinion and offers Backlash <3 arc-min or optional 1. Ideal for CNC machining centers, metal cutting machines, laser machines and high-precision milling machines.
Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.
Read More »