PTO Power Units

New Heavy Duty PTOS Are Nearly Maintenance Free
PTO Power Units

New Heavy Duty PTOS Are Nearly Maintenance Free

Twin Disk’s new RC 211 and RC 311 are designed for low maintenance in severe applications. Including main bearings that have been lubricated for long life and hydraulic actuation, the PTOs can be used for both side load and in-line applications. The products have organic friction plates, but sintered iron plates are optional. The RC 211 has a torque rating of 909 lb-ft, and the RC 311 has a...

Read More »
HP500 Power Take Off Features Auxiliary Drive Pump Towers
PTO Power Units

HP500 Power Take Off Features Auxiliary Drive Pump Towers

HP500 Power Take Off is available with SAE #1, SAE #2, or SAE #3 input housings and 14, 11.5 and 10 in. input couplings. Unit feature maximum power rating 373 kW at 1,800 rpm and modular design. This PTO is suitable for driving pumps, grinders, crushers, dredgers, chippers and shredders. Unit’s pump towers are rated to 299 kW maximum capacity per tower and can be rotatable 0°, 45° and 90°....

Read More »
RC Series Power Take-Offs feature self-adjusting dry clutches.
PTO Power Units

RC Series Power Take-Offs feature self-adjusting dry clutches.

Suitable for construction, mining, snow removal, forestry, agriculture and recycling, Power Take-Offs is available in RC214 and RC314 models. Designed with two and three friction plates, RC214 provides maximum input torque of 2,195 lb-ft organic and 2,748 sintered whereas RC314 model with 3,297 lb-ft and 4,125 respectively. Featuring advanced controlled system for soft-starting high-inertia...

Read More »
WPT Power Debuts Pilotless Mechanical Power Take-off at TCI Expo
PTO Power Units

WPT Power Debuts Pilotless Mechanical Power Take-off at TCI Expo

Wichita Falls, TX November 13, 2015 – WPT Power Corporation has expanded it’s power take-off line with the introduction of the Pilotless Mechanical PTO. The product launch was revealed at the 2015 Tree Care Industry Expo in Pittsburgh, PA in November. Tier 4 standards have made fitment of pilot bearings increasingly difficult. This new mechanical PTO design eliminates the pilot bearing and...

Read More »
HP800 Power Take Off features spring applied, hydraulically released brake.
PTO Power Units

HP800 Power Take Off features spring applied, hydraulically released brake.

Suitable for driving pumps, grinders, crushers, dredgers, chippers and shredders, HP800 Power Take Off is rotatable by 0°, 45° and 90°. Offering speed increase ratios of 0.77:1 and 0.83:1, product is available with SAE #0 input housing and 18 in. SAE 460 input coupling or SAE #1 input housing and 14 in. SAE 355 input coupling. Featuring auxiliary drive pump towers with 400 hp maximum capacity...

Read More »
RO 314/311 PTO excludes rotary union requirements.
PTO Power Units

RO 314/311 PTO excludes rotary union requirements.

RO 314/311 PTO is suitable for agriculture, construction, manufacturing, marine, mining, timber, and oil and gas production applications. Allowing side load and inline applications, device can be engaged and disengaged remotely via control valve. Utilizing three 14 in. friction plates in 314 and three 11 in. plates in the 311, device eliminates need of external cooling and filtration.

Read More »
High-Horsepower PTO meets needs of heavy-duty applications.
PTO Power Units

High-Horsepower PTO meets needs of heavy-duty applications.

WithÂ- max power rating of 1,243 hp at 1,800 rpm, HP1200 hydraulically actuated power take-off (PTO) has modular design that allows for both side-load (P) and in-line (I) applications via change of bearing carriers. Control system for smooth engagement of driven equipment is standard, and auxiliary drive pump towers, with 400 hp max capacity per tower (550 hp max for both), are rotatable by...

Read More »
Power Take-Off remotely engages over-center mechanism.
PTO Power Units

Power Take-Off remotely engages over-center mechanism.

When complex machinery configurations or location hinder easy access to activation, RO 111/211 Remote Over Center PTO can be engaged and disengaged remotely via control valve and/or electronic control. Hydraulic or pneumatic actuation is achieved through ports, making access to fittings straight-forward. PTO utilizes one 11 in. friction plate in 111 model and 2 plates in 211. Design allows for...

Read More »
PTO Power Units

Ocean Power Technologies Awarded $2.6 Million Contract by Mitsui Engineering & Shipbuilding for Development and Supply of Japan Utility PowerBuoy® System

PENNINGTON, N.J.Â- – Ocean Power Technologies, Inc. (Nasdaq:OPTT) ( OPT" or "the Company") today announced that the Company has received a $2.6 million contract from Mitsui Engineering & Shipbuilding Co., Ltd. ("MES") to provide the final design and supply of key components of a PowerBuoy system intended for deployment off the coast of Japan to demonstrate its utility application in local...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics