Asahi/America Expands Series 19 Actuation Line
Asahi/America, Inc., the leader in thermoplastic fluid flow technology, has recently expanded its Series 19 electric actuation line to include a multiturn unit capable of operating on diaphragm and gate valves up to 4”. The Series 19 MAV MultiPack® multiturn actuator, features accelerated cycle times ranging from 13 to 100 seconds and a smart feature that tracks the number of completed cycles....
Read More »New ASCO Gas Valve and Motorized Actuator Designed for Burner-boiler Applications
ASCO series 158 available in sizes from 3/4” to 3” NPT (DN 10 to DN 80) in both single and monoblock constructions. Offers high close-off pressure of 75 psi ensures a safe shutoff in the event of a fuel train system failure and eliminates need for additional safety components. ASCO series 159 available in rugged construction as well as can be mount in any position and offers a visual...
Read More »New ASCO Gas Valve and Motorized Actuator Designed for Burner-boiler Applications
ASCO series 158 available in sizes from 3/4” to 3” NPT (DN 10 to DN 80) in both single and monoblock constructions. Offers high close-off pressure of 75 psi ensures a safe shutoff in the event of a fuel train system failure and eliminates need for additional safety components. ASCO series 159 available in rugged construction as well as can be mount in any position and offers a visual...
Read More »HPLC Injector targets OEM systems.
Designed specifically to be built into OEM system, Cheminert C52 Series is available in 4, 6, 8, and 10-port configurations. Integrated 24 V motor/valve assembly comes in stainless steel or PEEK and only requires connection to instrument's power supply. Control is simplified to require single contact closure; injector’s position is determined by whether closure is held high or low. Optional...
Read More »7 Steps to Optimize Your Spring Design for Your Next Project
This white paper provides an in-depth overview into how to optimize a compression spring design in seven steps.
Read More »HPLC Injector targets OEM systems.
Designed specifically to be built into OEM system, Cheminert C52 Series is available in 4, 6, 8, and 10-port configurations. Integrated 24 V motor/valve assembly comes in stainless steel or PEEK and only requires connection to instrument's power supply. Control is simplified to require single contact closure; injector’s position is determined by whether closure is held high or low. Optional...
Read More »Efficiency Booster for Small Part Handling
With the micro valve MV 10, you can easily boost the productivity and energy efficiency of Pick & Place applications for small parts. This pneumatic valve is so small it can be integrated directly on grippers or other pneumatic actuators and can be plugged or screwed into the actuator ports. Traditional systems use valves located in a control cabinet some distance from the gripper and use tubing...
Read More »Efficiency Booster for Small Part Handling
With the micro valve MV 10, you can easily boost the productivity and energy efficiency of Pick & Place applications for small parts. This pneumatic valve is so small it can be integrated directly on grippers or other pneumatic actuators and can be plugged or screwed into the actuator ports. Traditional systems use valves located in a control cabinet some distance from the gripper and use tubing...
Read More »Electric Actuators are designed for facilitated commissioning.
Available for -½–4 in. control valves, AEL 5 series is reversible, having linear output, and features internal components – PCB, positioner card, limited switches – affixed to aluminum support for holding/fitting accessories. Design with easy commission limit switch adjuster lets user loosen cam with one screw and then adjust its position with second screw. Valve adaptor helps...
Read More »Electric Actuators are designed for facilitated commissioning.
Available for Ã-½–4 in.ÃÂ control valves, AEL 5 series is reversible, having linear output, and features internal componentsÃÂ – PCB, positioner card, limited switches – affixed to aluminum support for holding/fitting accessories. Design with easy commission limit switch adjuster lets user loosen cam with one screw and then adjust its position with second screw. Valve adaptor...
Read More »Belimo New KR Actuator on Pressure Independent Valve - HVAC Solution When Space Is Limited
Danbury, CT – Belimo Americas is pleased to announce the release of KR actuator on the Pressure Independent Characterized Control Valve (PICCV). The multi-patented, rugged KR actuator offers 18 in-lbs (2 Nm) and is designed for motorizing open-close applications to ensure optimal valve design and absolutely reproducible control quality. The actuator features a simple, manually adjustable angle...
Read More »Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »