New PMDC Gearmotors with Rated Torque Ranging from 20 lb-in to 1535 lb-in
33A7-25H2 and 33A7-30H3 delivers up to 1535 lb-in torque while using 40-60% less energy than a same-size worm gearmotor. Large 30H3 gearhead features a 1.25 hollow shaft and covers the gear ratios of 80:1 to 240:1. Ideal for conveyors, pumps, packaging, industrial automation and wide range of solar- or battery-powered equipment.
Read More »
MDX Integrated Servo Motors from Applied Motion Products are Now UL Recognized
Watsonville, CA… July 10, 2020… Applied Motion Products increases the acceptance of MDX Integrated Servo Motors into industrial motion control applications with UL Recognition on all models. This certification assures users in the United States and Canada that these motors meet high quality standards for electrical safety. The integrated motors were evaluated according to ANSI/UL standards...
Read More »
New Electric Motor for Low and High-voltage Applications Ranging from 24 to 800 V
Offers continuous power from 20 kW to 60 kW and peak power from 30 kW to 70 kW. Spicer® 141 axle is available with wet brake and drum brake configurations. Lifetime wet brake offering comes standard with an internal spring-applied hydraulic-release parking brake to support industry safety initiatives.
Read More »
New Linear Stepper Motors Provides Low Profile and Small Cross Section
Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of very precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Ideal for high-speed open loop positioning applications.
Read More »
Managing the New FGD Wastewater Regulations
A guide for managing Flue Gas Desulfurization wastewater using leading technologies.
Read More »
New Miniature Linear Voice Coil Motor Comes with Threaded 2-56 UNC-2A Shaft
Features high acceleration/deceleration, high speed, high reliability, zero backlash and 0.125 in. (3.2 mm.) stroke length. Offers high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with housing measuring 0.625 in. (15.9 mm.) dia. by 0.375 in. (9.5 mm.) long. Ideal for heptic feedback and pipetting in medical devices, switch activation, testing, sorting,...
Read More »
New Linear Stepper Motor with 30/60 mm Effective Stroke
PFL20 is a efficient, high thrust tin-can linear actuator with a bipolar winding. Reaches 5V rated voltage, resistance of 33 Ohms/phase and inductance of 12 mH/phase. Simple structure of linearstep motor helps to save space and reduce costs, due to few components needed.
Read More »
New Linear Stepper Motors for High-speed Open Loop Positioning Applications
Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Provides multiple forcers on a single platen and no servo tuning is required.
Read More »
New AXW Large AC Motors for Harsh and Contaminate Filled Environments
AXW 5000 and 5800 motors are available with IP56 rating for protection against contaminants and dust ingress. Suitable for continuous operations due to consistent cooling of water jacket surrounding the motor. Advantages include high power densities, small overall footprint size as well as reduction of noise and heat in surrounding environment.
Read More »
New NEMA AC Motors for Hazardous Area Locations
NXR 7100 is class I div 2 capable and offers more HP per pound than conventional TEFC motors but with small frame size in some power ratings. Available with up to an IP56 rating for protection against contaminates and dust ingress. Internal cooling loop circulates air inside the motor, moving heat from the rotor to the frame, where an external fan blows air over the frame to remove the heat.
Read More »
New Linear Voice Coil Motors Offer Low Inertia and Zero Cogging
Available in very LVCM-025-038-01 and LVCM-025-038-02 models with high accuracy and repeatability when operated as DC servo motor in a closed servo loop. LVCM-025-038-01 features continuous force of 2.5 lbs (11.0 N) and peak force of 7.8 lbs (34.7 N) whereas LVCM-025-038-02 features 16.4 oz (4.6 N) and 51.9 oz (14.4 N) respectively. Come with 10-32 UNC-2B threaded mounting hole in the housing and...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
