DRS2 Series Linear Actuator features adjustable pushing force and timing.
Mechanical Power Transmission

DRS2 Series Linear Actuator features adjustable pushing force and timing.

DRS2 Series Linear Actuators are offered in 42 mm and 60 mm models with or without a ball screw guide and electromagnetic brake. Units come with input drivers such as built-in controller, pulse input type or pulse input type with RS-485 communications. Actuators feature mechanical multi-turn absolute encoder and offer a repetitive accuracy of ±0.01 mm with rolled ball screw and ±0.003 mm with...

Read More »
NCC08-75-3000-3X Voice Coil Actuator features moving coil design.
Mechanical Power Transmission

NCC08-75-3000-3X Voice Coil Actuator features moving coil design.

NCC08-75-3000-3X Voice Coil Actuator generates continuous force of 1330 N and peak force of 4000 N. Unit features a stroke of 20 mm and motor constant of 323 N/sqrt(watt)]. Actuator measures 190 mm diameter and 207 mm retracted length. Unit’s moving coil design provides hysteresis free movement and non-commutated coil offers ripple free motion and eliminates cogging. Product is suitable for...

Read More »
35DBM Linear Actuator is RoHS compliant.
Mechanical Power Transmission

35DBM Linear Actuator is RoHS compliant.

35DBM Linear Actuator comes with 35mm linear stepper motor and is equipped with magnetic circuit which is powered by neodymium magnets. Unit offers holding force of 112N and is suitable for auto injectors, laboratory automation, medical pipettes and valve actuation applications. Product is offered in captive and non-captive versions and features 7.5 deg step angle.

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »
Electric Linear Actuator is IP66 rated.
Mechanical Power Transmission

Electric Linear Actuator is IP66 rated.

Electric Linear Actuator offers load handling in the range of 120-10,000N. Unit is available in , easyE-35, easyE-50 and easyE-60 versions. Product is suitable for medical & rehab, industrial automation, furniture, agriculture, automotive and aerospace applications. Actuator’s motor and tube are made of powder coated steel or stainless steel. This device's front and rear brackets are...

Read More »
Proportional Valve Electrical Actuators feature built-in safeguards.
Mechanical Power Transmission

Proportional Valve Electrical Actuators feature built-in safeguards.

Proportional Valve Electrical Series 7 Actuators (PVE S7) come with microcontroller with embedded software algorithms. Operating in -40 to +90 °C temperature range, units use spool position feedback signal for closing the loop on PVG/Steering valve main spool position. Actuators are designed with fault monitoring, spool position sensor with dual demodulator. Units are enabled by LED lights for...

Read More »
Mechanical Power Transmission

Programmable Electric Actuators Rapidly Replacing LVDT

CARLSBAD, CALIFORNIA - Programmable electric actuators have been increasingly favored as airless substitutes for LVDT’s and ball screws in connector pin insertion and connector pin height measurement. Unlike ball screws or LVDT’s, electric actuators have programmable positioning. They can press the pin in with the correct force, verify its position, and provide a tight fit every time. This...

Read More »
DYNAMIXEL X-Series Actuators feature redesigned aluminum case.
Mechanical Power Transmission

DYNAMIXEL X-Series Actuators feature redesigned aluminum case.

DYNAMIXEL X-Series Actuators offer idle current of 40mA and can track output position up to 4096 steps-per-revolution. Units use hollow back case which allows user to rout wires under the rear cable cover or via a port-hole in the idler bearing. Product enables operator to modify acceleration and velocity parameters and provides two current-based torque control modes. Actuators feature 360-degree...

Read More »
Motion Slide Actuators are suitable for X-Y and X-Y-Z positioning systems.
Mechanical Power Transmission

Motion Slide Actuators are suitable for X-Y and X-Y-Z positioning systems.

Motion Slide Actuators are available in Gen 2 compact and value line linear motor-ready models. Units come with horizontal, vertical, or inverted mounting options and integral sensor mount grooves. Compact slide actuators offer travel distance to 36 in. and travel speeds up to 20 in. per second and comes with a motor mount which is compatible with NEMA 17 and 23 motors. Value line linear slide...

Read More »

All Topics