Automatic Transmission is designed for pressure pumping.
Transmissions

Automatic Transmission is designed for pressure pumping.

Carrying 3,200 hp (2,386 kW) rating, 9832 Oil Field Series™ (OFS) model delivers continuous torque and maximum horsepower for pressure pumping in difficult environments. Design and power enable extraction of shale oil and gas deposits at deeper levels, while size and weight address transportation limitations imposed by poor road conditions and mountainous terrain.

Read More »
Standard 3-Phase AC Motors offer max efficiency of 73%. .
Motors

Standard 3-Phase AC Motors offer max efficiency of 73%. .

Available in cable or terminal box type, KIIS Series provides 60 W, 1/12 hp or 100 W, 1/8 hp output power. Units can maintain wide speed range of 3–120 H (90~3,600 rpm) when used with inverter. Standard GVH parallel shaft gear headÂ- offers up to 350 lb-in. of permissible torque, while Hypoid right angle hollow shaft gear head, available exclusively on 100 W model, and is capable...

Read More »
Transmissions

Technology Award for Dual Clutch for Trucks

The I-Shift Dual Clutch transmission uses technology from the sports car industry to lift the driveability in heavy trucks to a whole new level. It is the first dual-clutch transmission for serial produced heavy vehicles, and the engineers responsible for the solution will receive Volvo's technology award for 2014. Dual clutch technology means that two gears can be engaged simultaneously and...

Read More »
Miniature Gear Drive is rated for 1/8 hp at 1,800 rpm.
Gearheads and Gearboxes

Miniature Gear Drive is rated for 1/8 hp at 1,800 rpm.

Measuring 1.25 in.Â-³, Miniature RA-300 Gear Drive has 0.250 in. diameter single input shaft, and single or double output shaft mounted in radial ball bearings. Unit is constructed with machined aluminum housing and steel case hardened helical gears in 1:1 and 2:1 ratios. Weighing just 6.1 oz, RA-300 provides output torque of 4.4 lb-in. (1:1 ratio) and 8.8 lb-in. (2:1 ratio).

Read More »
HPLC Injector targets OEM systems.
Actuators

HPLC Injector targets OEM systems.

Designed specifically to be built into OEM system, Cheminert C52 Series is available in 4, 6, 8, and 10-port configurations. Integrated 24 V motor/valve assembly comes in stainless steel or PEEK and only requires connection to instrument's power supply. Control is simplified to require single contact closure; injector’s position is determined by whether closure is held high or low. Optional...

Read More »
Short Run / Prototype Sintered Bronze Bushing Solutions from National Bronze Mfg. Co.
Plain Bearings (Bushings)

Short Run / Prototype Sintered Bronze Bushing Solutions from National Bronze Mfg. Co.

Roseville, MI — National Bronze Mfg. Co., a leading manufacturer of bronze bushings, bearings, and machined components, is please to introduce a solution for customers in need of powdered metal or sintered" bearings in short run or prototype quantities. The 100+ year old manufacturer describes both the problem many customers face as well as their customized solutions in the following expert...

Read More »
Valves

The New Basic TEB/LEB Digital Proportional Valve from Atos

New Basic TEB/LEB digital proportionals - the Best ever Atos product! Atos is proud to be the first worldwide electrohydraulic company presenting a new range of high performances digital proportionals with same prices of analog models. The software setting of scale, bias, linearization and dynamic response allows to customize the valve's behavior, thus increasing the electrohydraulic system...

Read More »
Turbines

Siemens Signs Long-term Service Extension for Rhyl Flats Offshore Wind Farm in North Wales

• First 15-year post-warranty service agreement extension for Siemens offshore wind service Siemens has signed a long-term agreement with Rhyl Flats Wind Farm Ltd., 50.1% owned by RWE AG, to continue providing service and maintenance at the Rhyl Flats wind farm off the coast of North Wales for the next 15 years. Siemens has been providing service and maintenance for the 25 SWT-3.6-107 turbines...

Read More »
Compact and Dynamic 8LS Motor Series from B&R Now Even More Powerful
Motors

Compact and Dynamic 8LS Motor Series from B&R Now Even More Powerful

Motors from B&R's 8LS series have been completely revamped and are now more powerful than ever. A more compact housing, optimized design and additional sizes are only some of the features that make these motors even more attractive and universal. B&R has improved the already very powerful and dynamic servo motors from the 8LS series in many details. For example, size 2 and 3 motors with the...

Read More »
Magnetek to Exhibit at Port and Terminal Technology Conference and Exhibition
Controls and Controllers

Magnetek to Exhibit at Port and Terminal Technology Conference and Exhibition

MENOMONEE FALLS, Wis.Â- — Magnetek, Inc. (NASDAQ: MAG), a leading provider of power control solutions to the material handling industry, will be exhibiting at the 7th International Port Terminal Technology Conference and Exhibition being held April 21-22 in Miami. Magnetek offers a variety of adjustable frequency drives, shoe and disc brakes, motors, and radio remote controls, which can...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics