Brushless DC Motors offer CANopen networking capabilities.
Motors

Brushless DC Motors offer CANopen networking capabilities.

With CANopen interface, up to 127 Brushless DC Motors can be connected with single, shielded 2-wire cable. Data may be transmitted at speeds up to 125 kBd at distances over 550 yards. At lower baud rates, transmission distance can exceed 3 miles, making communications flexible to virtually any location. Able to withstand up to 80 Vdc regenerative energy, CANopen-enabled motors utilize 2 safety...

Read More »
Self-Lubricating Graphite Plugged Bronze Sleeve Bushings Now Available Online
Plain Bearings (Bushings)

Self-Lubricating Graphite Plugged Bronze Sleeve Bushings Now Available Online

In response to the growing demand for the graphite plugged bushing product line, we are happy to announce that the entire line of standard size graphite plugged sleeve bushings are available for purchase online at www.bronzebushings.com. Hundreds of industry standard size sleeve bushings are listed in both inch and metric standard sizes.Â-  These products are inventoried for quick...

Read More »
Ball Bearings of 440 SS serve high-speed/-tension applications.
Bearings

Ball Bearings of 440 SS serve high-speed/-tension applications.

Offered for Â-½–1 ½ in. and metric shaft sizes, Value Bearings feature setscrew locking inserts and stainless steel flingers over single-lip seals. Choice series eccentric lock bearings – shaft sizes from 203 ring ½ in. to 214 and 215 ring sizes (inch and metric) – feature 304 stainless steel locking collar and silicone single lip seals under ss flingers. Along with...

Read More »
Magnetek Awarded Patent for HPV® 900AF Elevator Drive Technology
Motors

Magnetek Awarded Patent for HPV® 900AF Elevator Drive Technology

MENOMONEE FALLS, Wis.Â- – Magnetek, Inc. (NASDAQ: MAG), a leading designer and manufacturer of elevator drives, today announced the Company has been awarded a patent by the United States Patent and Trademark Office for use on Magnetek’s HPV® 900AF Elevator Drive. Protected by Patent No. 9,093,937, the new technology was issued for the method and apparatus for determining position...

Read More »
Turbines

Siemens Wins 100 Megawatts Onshore Wind Order in Australia

• 32 SWT-3.2-113 direct drive wind turbines • Long-term service contract included • Clean renewable energy for more than 70,000 households • Project to be built in Hornsdale South Australia Siemens and Neoen Australia have signed a contract for the Hornsdale Wind Farm project located in the state of South Australia. Consisting of 32 Siemens direct drive wind turbines, this project will...

Read More »
Pumps

OneSubsea to Supply Industry's First 15,000-psi Subsea Pump System for the Stones Development

HOUSTON —Â- OneSubsea®, a Cameron (NYSE: CAM) and Schlumberger (NYSE: SLB) company, was awarded a contract in the second quarter of 2015 to supply subsea processing systems for the Shell Offshore Inc. Stones development in the Gulf of Mexico. This award follows a Technology Qualification Program and will deliver the industry's first 15,000-psi subsea pump system, to be installed...

Read More »
Kollmorgen Exhibits Leading Hygienic Design Solutions at PACK EXPO 2015 - Booth C-1741
Motors

Kollmorgen Exhibits Leading Hygienic Design Solutions at PACK EXPO 2015 - Booth C-1741

Special presentation “Advanced Hygienic Design for Food Processing Equipment” on Sept. 29 RADFORD, VAÂ- – Kollmorgen will exhibit its industry-leading motion solutions at PACK EXPO, September 28 – 30, 2015, Booth C-1741, at the Las Vegas Convention Center. PACK EXPO attendees are invited to register online using Kollmorgen’s complimentary pass code: 79K95. In addition to product...

Read More »
AC30 Series Drive From Parker Rceives DNV Marine Certification
Motor Controllers and Drives

AC30 Series Drive From Parker Rceives DNV Marine Certification

Charlotte, NC,Â- – Parker Hannifin, the global leader in motion and control technologies, is pleased to announce that the AC30 series of variable frequency drives has achieved DNV marine certification. The certification acknowledges the ability of AC30 to operate reliably and safely in even the most extreme of environments, including marine and offshore. Available in the power range 1 HP...

Read More »
Routine Turbine Handling In Offshore Conditions
Hoists

Routine Turbine Handling In Offshore Conditions

The Gerritsen On- Offshore Services BV company have handled a routine turbine maintenance procedure being undertaken on an offshore location in the Southern North Sea. This involved four of their personnel, utilizing an air operated hoist unit manufactured by the J D Neuhaus company for the safe and effective lift and maneuver procedures for a turbine lift load of 26,500lbs. The turbine was...

Read More »
MagnaShear Motor Brakes Hold Consistent Depth on Hoist Ladder with No Maintenance or Adjustment Required
Brakes

MagnaShear Motor Brakes Hold Consistent Depth on Hoist Ladder with No Maintenance or Adjustment Required

To be Featured in SNAME booth #321 Workboat Show booth #751 Fairfield, OHÂ- — The MagnaShear motor brake from Force Control Industries employs oil shear technology, providing longer service life even in demanding dredging applications like hoist ladders, cutterhead ladders, and more. Proven oil shear technology transmits torque between lubricated surfaces  thereby eliminating wear...

Read More »

All Topics