Spherical Plain Bearings feature low friction lining.

Available with bore sizes from 320 mm radial and 220 mm axial, X-Life Spherical Plain Bearings feature ELGOGLIDE lining, which consists of fabric made from PTFE and support fibers embedded in resin. Lining offers wear resistance and ability to run dry or unlubricated, even with reciprocating motion. Since bond between sliding liner and support body is moisture resistant, X-Life large bearings are...

Read More »
Planetary Rigid Axles suit light/medium-duty applications.

Planetary Rigid Axles suit light/medium-duty applications.

Series PRLC 124/144 features hydraulically actuated wet-disc brakes that are insulated from contaminants. Mechanical parking brake eliminates need for driveline brake by combining service, parking, and emergency braking in single unit. With axle capacity of 24,300 lb for lift trucks, Series PRLC 124 offers lift capacities from 7,700-11,000 lb. Series PRLC 144 has axle capacity of 35,000 lb and...

Read More »

Spherical Plain Bearings come with or without outer ring.

Metric size Series K, with solid stainless steel outer ring, is used in low revolution applications, with dynamic loads, and in corrosive environments. Insert is bronze with PTFE liner bonded to inner surface, and ball is 100Cr6 bearing steel, hardened, ground, polished, and hard chrome plated. Bearings without outer ring feature zinc-plated, free-cutting steel insert with PTFE liner bonded to...

Read More »

Rod End Bearings come in metric sizes.

Available in threaded stem or tapped type models, Self-Lubricating Rod End Bearings control and link mechanisms in all types of machines. Units feature zinc-plated steel rod end body, bronze external ring, and ball socket made of 100 Cr6 bearing steel, hardened and ground. With operating temperature of -22 to 300Â-

Read More »
Timing Belt Pulleys feature integral hub fastening system.

Timing Belt Pulleys feature integral hub fastening system.

Designed for Â-¼ in. belts, .080 pitch MXL Series A6D16 is made of clear iridite aluminum alloy and available with 12-72 grooves in double- or no-flange types. Bore sizes range from .125-.250 in., and ODs range from .286-1.813 in. FairlocÂ-® integral hub fastening design eliminates need for separate hub clamp devices, and offers benefits of frequent position adjustment, while adding...

Read More »
Timing Belt Pulleys feature integral hub locking system.

Timing Belt Pulleys feature integral hub locking system.

Comprised of 34 HTDÂ-® pulleys made of clear anodized aluminum alloy, A 6D23-(inch) and A 6D23M (metric) Series double flange type timing belt pulleys have 3 mm pitch and are designed for .236 in. belts. FairlocÂ-® integral hub fastening design adds positive metal-to-metal fastening strength along entire hub surface. Products, available from stock in 10-44 grooves, come in bore sizes from...

Read More »

Shaft Reducers/Extenders have Fairloc hub fastening system.

Comprised of 48 models, S52FCY Series is manufactured in inch and metric sizes to extend shafts to same or different diameters. Hub end of coupling features FairlocÂ-® integral hub fastening system, which eliminates marred shafts. Made of 303 stainless steel, extenders offer zero backlash and are readily adjustable on shaft. They are designed to fit shafts from .120-.500 in. (3-12 mm) dia on...

Read More »

Flexible Shafts are suited for remote control assemblies.

Flexible shafts, available as A 7C13-(inch) and A 7C13M (metric) Series, are designed to be panel mounted without casing. Products operate in manual mode and are offered with curvature radius from 20-1.5 in. (500-38 mm). Diameters range from .130-.187 in. (3.3-4.8 mm), and lengths vary from 3-14 in. (76-355 mm).

Read More »

Miniature Air Cylinder has long-life design.

Beswick 1 in. bore cylinders are made from brass or stainless steel with clevis style tail. Long-life linear actuator has piston rod supported with 2 composite bushings: one in nose, and other in tail assembly. Separated bushings adequately support couples induced by side loads and/or stress reversals. Rebuildable products feature dynamic lip seals with U-shaped cross section and do not require...

Read More »
Linear Bearings offer extended service life.

Linear Bearings offer extended service life.

Self-lubricated Series S99PS3 and S99PS4 include Frelon lined plain and flanged sleeve bearings that can tolerate up to 1,500 psi over portion of bearing carrying load. Frelon liner material replaces oilite and plastic materials and is impervious to most industrial chemicals and acids. Available in inch sizes to fit shafts ranging from 3/16-Â-¾ in. diameter, bearings range in length from...

Read More »

All Topics