New Mechanical Power Transmission Products

Speed Reducers offer increased torque ratings.

BrowningÃ-® Torque Taper Plus Shaft-Mount Reducer Models 307 and 315 are offered in ratios of 5, 9, 15, 25, and 35:1. Reverse mount bushing system allows user to mount bushing from either side. Barrier seal system combines V-ring face seal, grease-filled labyrinth, and rotating outer flinger to defend against contamination and oil seal damage. Units are suited for package handling, aggregate...

Step Motors offer holding torques from 45-83 oz-in.

Super Torque Size 17 (1.66 in.Ã-²) hybrid step motor family is offered with 3 axial lengths. Shorter, 1.8Ã-

Brushless DC Servomotor achieves speeds to 10,000 rpm.

NEMA size 23 BLDCmotor(TM), available in 3 stack lengths, is compatible with all 3-phase brushless DC amplifiers. It achieves speeds to 10,000 rpm with continuous torque rated up to 53 oz-in. and power output up to 150 W. Winding options include rated voltages from 12-160 Vdc. Features include permanently lubricated ball bearings, totally enclosed motor housing, and dynamically balanced rotors.

Grounding Bushings suit rigid metal conduit and IMC.

Series BLG Insulated Grounding Bushings provide means of grounding conduit and protect insulated conductors from abrasion during pulling and mechanical vibration. Thermosetting phenolic insulator is 150Ã-

Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up

This white paper provides an in-depth overview into choosing the right bearing for machine tools.

Servo Actuator produces 480-2,600 Nm continuous torque.

TPMA AC Servo Actuator consists of one brushless ac servomotor with TP-High Torque planetary gearhead, resolver or absolute encoder, and optional holding brake. Available in various frame sizes, product comes in gear ratios of 110:1 and 220:1. Unit incorporates tapered roller bearings in output stage, driving flange, and integrates pinion gear in motor, allowing positioning accuracy of less than...

DC Brush Motors range from 2.4-240 V and 1.0-400 W.

Series Y permanent magnet, DC brush motors are offered in frame sizes from 19-100 mm with torque ranging from 0.1-144 oz in. They can be tailored to suit specific application with modifications to windings, shafts, and motor casing. Gear heads are available for all models and motors can be sealed if necessary. Applications include commercial products, pumps, and HVAC.

Ball Bearings protect against corrosion and contaminants.

MarathonÃ-® stainless steel, single-row, deep groove ball bearings can be specified with solid lubricant packs, which prevent grease washout during washdowns. Optional packs contain USDA-approved food grade oil or standard mineral oil, and slowly meter lubricant to critical parts of bearing. Available in open, double sealed, or shielded versions, bearings perform over wide range of operating...

Power and Free Conveyor Chains move pallets and containers.

IWIS chains are available for warehouse and material-flow systems where pallets, containers, or workpieces must be conveyed, accumulated, accelerated, and singled out. Designed with light-running transport rollers made of hardened steel, plastic, or anti-static, products offer offset roller arrangements and minimal radius to accommodate system curves. Chains deliver optimized load distribution...

Bevel Gear Drives suit heavy-duty industrial applications.

SK 92072 drives offer leak-free and maintenance-free operation for heavy-duty industrial applications. Construction elements include UNICASE(TM) one-piece housing, wear-free gearing designed to AGMA CLASS 13 standards, impact-resistant protective finish, and synthetic lubricating oil. Operating at up to 97% efficiency, products provide gear ratios from 3.85:1 to 54.65:1, output speeds from 32-455...

Planetary Gearboxes suit elevator movement applications.

Constructed for passenger and service elevators, ZF-Ecolift models RME 310 and RME 410 use 2-stage planetary gear design to transmit power to sheave and fulfill elevator technical regulations TRA 200 and TRA 220-229. Suited for motor speeds of 1,000, 1,500, and 3,000 rpm, products may be used with motors up to 50 hp and offer load capacity of up to 5,500 lbs. Units emit low noise due to helical...

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.