Linear Actuator Series suits positioning applications.

Totally enclosed Digit-HT linear actuator series provides up to 440 lbs. of force using 35 Vdc driver at 1.7 to 3.4 A. Available in 2, 4, and 8 in. stroke lengths, and moving at up to 14 in./sec, in-line linear actuator series offers repeatability of 1.5 microns. Mounting options include rod bearing clevises, trunnion mounts, and brackets. Precision ball and Acme drive screws are directly coupled...

Read More »
Electric Linear Actuator suits harsh environment applications.

Electric Linear Actuator suits harsh environment applications.

Kodiak(TM) K2 electric actuator series can lift or move loads of up to 2,000 lbs. Its operating speed ranges from 0.5 to 2.4 ips at rated loads, and stroke length varies from 4 to 18 in. Available with various mounting configurations, actuator series has ball bearing supported extension rod that tolerates misalignment and side load. Construction includes O-rings, heavy-duty wiper seals, and TGIC...

Read More »

Precision Turbine incorporates governed design.

DotcoÂ-® 12R91 series precision turbine allows tool to idle and provides full power under load. Pre-loaded bearings maintain stability in spindle to allow for smoother cuts. Available with 3 mm and 1/8 in. collets, 65,000 rpm rear exhaust governed tool suits applications that previously used 100,000 rpm non-governed tools. It is available in models with 2 and 4 ft overhose to direct exhaust...

Read More »
Bearings improve machine tool performance.

Bearings improve machine tool performance.

FafnirÂ-® THSS True High-Speed Sealed bearings are angular contact ball bearings designed for high spindle speeds. Non-contact dynamic seals keep contamination out while minimizing running torque, and effectively retaining grease inside bearing. Fafnir WearEver(TM) bearings resist contamination-induced surface damage. They feature CERBECÂ-® ceramic ball and steel that resists wear debris...

Read More »
Brushless Motor survives hostile environments.

Brushless Motor survives hostile environments.

Dustproof Series brushless motor and resolver forms single component that completely locks out contamination, making unit suitable for hostile environments. Drive electronics can be removed, allowing motor to be controlled via RS232 communication. When combined with drive system, motors are suitable for closed-loop motion control applications. Motors are available in frame sizes from 3.25 to 7.5...

Read More »

Replacement Motors fit blower and condenser fans.

Masterfit multiple hp motors are easily and quickly adapted on-site, using combination of speed taps and capacitors. Line includes FD6000 and FDL6001 blower motors for 115 or 208-230 V, 1075 rpm applications from 1/6 to 1/2 hp; and model FSE6000 condenser fan motor, for 208-230 V, 1075 rpm applications from 1/6 to 1/3 hp.

Read More »

Single Phase Motor replaces Liebert air conditioning units.

Model C663 is direct replacement for Liebert model B-095D condenser motor, Johnstone part number S89-084, and Emerson part number K63HXEF4-4599. Single shaft motor is suited for 208-230/460 V 60 Hz, 1100 rpm applications at Â-¾ hp, or 50 Hz applications requiring 190/380 V, 925 rpm replacement motor. Motor includes capacitor and rainshield for protection in rugged weather conditions, and is...

Read More »

Open Drip-Proof Motors fit C and D flanges.

Motors are available in sizes from 320-frame up to 440-frame in outputs from 30 to 200 hp. In addition to meeting NEMA premium efficiency standards, motors have rugged ball bearings, cast-iron frame construction, Class B or F insulation, and rigid-base mounting plates. They are suitable for continuous-duty applications, including industrial pumps, fans, compressors, and conveyors.

Read More »
Quarter-Turn Actuator is powered pneumatically.

Quarter-Turn Actuator is powered pneumatically.

Compact Model 30 quarter-turn pneumatic actuator produces maximum torque output of 174,000 lb-in. at 100 psi air supply pressure. It provides long, maintenance-free life up to 2 million operations. Actuator cases are manufactured from aluminum with corrosion resistant epoxy finish. It is available with spring return, limit switch box, and pneumatic or electro-pneumatic positioner options.

Read More »
Damper Actuators offer high torque per footprint.

Damper Actuators offer high torque per footprint.

OpenAir spring-return damper actuators range from 62 to 142 lb in. torque, while non-spring return actuators offer range of 44 to 310 lb in. Both types provide direct-coupled connection for on-the-go installation. Full-stroke overload protection kicks in automatically to protect motor and components. Self-centering shaft couplings relieve strain on actuator and provide for longer motor life.

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics