Conduit Bushings keep water and gas out.
Conduit Sealing Bushings stop water, dust, or gas under pressures up to 100 psi from entering electrical enclosures. Compact bushing is made of two PVC coated metal discs with one-piece neoprene sealing ring positioned between. Discs and ring are compressed together by stainless steel screws. Zinc plated, malleable iron locking collar is optional. Bushings are available for Schedule 40 rigid...
Read More »
Grinding Wheel makes it easy on operator.
Type 29 Z-Plus weighs half of typical 4 1/2 in. grinding wheel, thus increasing operator's control and comfort while decreasing fatigue, particularly with small grinders used in tight spaces and at odd angles. Wheel's slightly concave profile lessens grinder's angle of attack, also reducing operator fatigue. Wheel has aluminum oxide abrasive, making it suited for blending and surface weld removal...
Read More »
Aluminum Shafting resists corrosion and wear.
DrylinÃ-® S aluminum shafting works with DryLinÃ-® R linear bearings and IglideÃ-® plain bearings. Anodized shafting has lower coefficient of friction and 3X lifetime of steel when run against appropriate bearing material. Aluminum shafts are available in nine models ranging from 1/4 to 2 in. dia. Shafting can be cut to length per customer requirements.
Read More »Rotary Actuators suit small parts handling applications.
Rotary Actuators have air-over-oil feature that offers advantages of hydraulics without traditional hydraulic plumbing. Units run on shop air, but have self-contained hydraulic system to absorb large quantities of kinetic energy, cushioning load. Actuators are offered in either 90Ã-
Read More »
Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up
This white paper provides an in-depth overview into choosing the right bearing for machine tools.
Read More »Brush Motor eliminates wire-wound coil.
ThinGap(TM) TG3300-70B slotless brush PM motor incorporates armature coil assembly that eliminates bulky iron core. It delivers max continuous torque of 80 oz-in. at 10,000 rpm, using input voltage of 24 Vdc and current of 27.5 A. Motor is rated at over 1 hp, yet weighs less than 34 oz,and is thermally rated for operation up to 160Ã-
Read More »
Rotary Actuators provide precise positioning.
CRAB Series feature modular construction to promote customization, and perform with few moving parts. Preloaded ball-screw assembly and gear-tooth profile virtually eliminate backlash. Actuators can achieve rotational motion ranges from 100 to 360 deg (depending on rack length) and torque capacity exceeding 5100 lbs-ft of force. All are self-contained and ready-to-mount for plug-in operation (AC...
Read More »
Stepping Actuator provides long controlled movement.
Model DSM4234LN stepper motor can continuously move linear pole with precision of 0.0035 mm full-step linear movement, or 0.00175 mm with half-step drive. Leadscrew nut formed in shaft has M4 hole threaded through center, which enables variable shaft lengths of any practicable size to be used. Threaded nut supports front bearing to adjust for minimum backlash. Applications include throttle...
Read More »
Right-Angle Gearmotor operates quietly.
Model M1500 G4 PM dc gearmotor has metal construction and Bakelite gear that provides quiet operation for noise sensitive applications. It is available in 12 to 115 V models, with maximum continuous torque ratings to 7 lb-in. Motors are UL approved and have ceramic magnets, double-shielded ball bearings, Class F insulation, dynamic alloy balanced armature, TENV design, externally replaceable...
Read More »Motors comply 100% with NEMA Premium(TM) efficiency levels.
Totally enclosed, fan-cooled (TEFC) and open drip-proof (ODP) motors include 3-phase ODP motors rated at 1 to 250 hp and general purpose, 3-phase TEFC motors rated at 1 to 200 hp. Motors include UnimountÃ-®, Hostile DutyÃ-®, Corro-Duty, and 841 PLUSÃ-®. TEFC and ODP motors in 200 to 500 hp range are also available. Motors are inverter ready, resistant to power quality problems, and...
Read More »
Gearheads and Actuators suit precision motion control duties.
Series PS Flange Output (PSF) and Shaft Output (PSS) gearheads and actuators provide positional accuracy of less than 1 arc minute. Offered with zero-backlash and high torque of harmonic drive gearing, they are available with various input options and flexible integration to allow use with most servo or stepper motors. Gearheads and actuators transmit torque loads up to 2900 lb-in. Ratios are...
Read More »
DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less
DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.
Read More »
