New Mechanical Power Transmission Products

Wrap Spring Clutch has stopping and holding features.

Model EC20CB incorporates friction clutch within same package to stop loads when drive is disengaged. Suited toward applications where run-on is problematic, EC20CB measures 45 x 36 mm. Designed for 24 V systems, device utilizes friction disc brake to bring driven axes to standstill. Clutch has ~2.2 Nm rated torque, with braking torque of ~0.2 Nm.

Spherical Plain Bearings do not require lubrication.

Suited for light to medium loads, DuraLube(TM) bearings achieve grease-free operation via use of PTFE liner system that reduces friction between spherical surfaces of inner and outer rings. Bearings do not attract or hold dirt. Applications include agricultural, material handling, construction, hydraulic cylinders, and off-highway equipment.

Press Brake suits continuous production applications.

Metal Muncher Viking Series hydraulic brake, with 2-axis Allen-Bradley Panelview 550 NC-control system, provides manual, automatic, or sequential programmable operation. Hydraulic system has 2 cylinders, twin pumps, modular valve system, hydraulic fluid tank, level gauge, fluid filter, and star-delta switch. Press brakes are available in capacities from 75 to 250 tons, with folding lengths from...

Self-Lubricating Bearings take place of sintered-bronze bushings.

iglideÃ-® M250 bearings are based on thermoplastic alloy, and are offered in 16 material grades and over 6,000 sizes. They provide impact resistance, vibration dampening, wear resistance, and ability to absorb dirt ingression. Mix of solid lubricants provides self-lubricating effect during dry operation, while high crystalline level on surface increases wear resistance. Bearings are suited...

Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up

This white paper provides an in-depth overview into choosing the right bearing for machine tools.

Collets and Guide Bushings suit Swiss-type lathes.

Headstock and sub-spindle collets are ground to precise size and TIR to meet precision machining requirements. Carbide-lined, Swiss guide bushings keep stock clean and unmarked, and extended-nose collets are suited for pick-off work or to compensate for tooling interference. Heat-treated to 40 Rockwell at head, they also serve as emergency collets.

Linear Actuator is encoder ready.

Size 17 Hybrid Linear Actuator can be used to install hollow-shaft encoders. It is offered with 8 mm extended-rotor journal and threaded rear housing. Captive, non-captive, and external linear versions are available. Resolutions range from 0.00006 to 0.002 in. per step, with operational thrust capabilities up to 50 lb. Applications include X-Y tables, medical equipment, semiconductor handling,...

Linear Actuators produce more than 20 g acceleration.

Non-commutated Voice Coil Linear Actuators are offered in stroke lengths from .05 to 3.00 in. Standard models range from .375 in dia x .35 in. long, supplying .06 lb of continuous force and .18 lb peak, to 8.0 in. dia x 3.0 in. long, supplying 133 lb continuous force and 400 lb peak. When used in closed loop, typical accuracy is 0.00004 in. and repeatability is 0.00002 in. Units provide smooth,...

Disc Brake features NEMA 4/IP-55 moisture protection.

StearnsÃ-® 87,300 Series solenoid-actuated, hazardous location disc brake is offered in 7 sizes with torque ratings from 10-105 lb-ft. Motor- and foot-mounted versions are available with NEMA 4, 7, and 9 enclosure protection. Cast-iron enclosure features O-ring seals between housing and endplate, as well as endplate and motor. Class H coil insulation and built-in thermal protector prevent...

Harmonic Drive Gearheads suit semiconductor industries.

RGH series gearheads employ design that combines zero backlash gear components with integral flange output supported by heavy-duty bearings. Available in 3 sizes, gearheads have rated output torque ranges from 221 to 1213 lbs-in, while max output torque is rated to 6,072 lbs-in. Positional accuracy is less than 1 arc-min, and reduction ratios are available from 50:1 through 160:1. RGH gearheads...

Grinding Wheels quickly remove heavy welds.

Sigma Green Premium Grinding Wheels have zirconia/ceramic grain. Designed for right-angle grinders, wheels come in 4, 4 1/2, 5, and 7 in. diameters, and are available with 5/8-11 throw-away adapters. Wheels cut up to 50% faster than aluminum oxide on 316 stainless steel, and run 20% cooler. Eliminating discoloration and warping of stainless steel and highly alloyed materials, typical applications...

Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors

Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.