ISL G Near Zero Natural Gas Engine Certified to Near Zero Emissions

First MidRange engine in North America to reduce NOx emissions by 90% from EPA 2010 VANCOUVER - Cummins Westport Inc. (CWI) today announced the new ISL G Near Zero (NZ) NOx natural gas engine is the first MidRange engine in North America to receive emission certifications from both U.S. Environmental Protection Agency (EPA) and Air Resources Board (ARB) in California that meet the 0.02 g/bhp-hr...

Read More »
Support and Actuator System works in ultra-high vacuum conditions.

Support and Actuator System works in ultra-high vacuum conditions.

Optimized for load capacity and stiffness, mechanical systems employ strut-based mounting system that minimizes vibration and allows facilitated and precise (sub millimeter) position adjustment of hardware without adding stress or distortion. Strut mechanical positioner has up to- 6 degrees of freedom: translational (X/Y/Z) and angular (pitch, roll, and yaw). While smallest design supports 200...

Read More »

Magellan Aerospace to Provide Landing Gear Assemblies to Messier-Bugatti-Dowty

TORONTO - Magellan Aerospace ( Magellan ) announced today that it has been awarded a follow on contract to provide nose and main landing gear components and kitted assemblies to Messier-Bugatti-Dowty ( MBD ) for major commercial aircraft customers. Magellan has produced these complex machined components for MBD since 2009. The parts are manufactured in Magellan's divisions in New York, New York...

Read More »
DC Brush and Brushless Motors, Encoders aid agriculture industry.

DC Brush and Brushless Motors, Encoders aid agriculture industry.

Available in- 3 motor lengths with output ratings of 8–30 W, 30 mm dia DC030C series offers gear reduction options that include G35 spur gearbox and G30 planetary gearbox with respective load torque ratings of 0.71–1.24 Nm and 2.47–8.83 Nm. Offered in 7 motor lengths with output ratings of 25–108 W, 54 mm dia DC054B series offers gear reduction options that include G51 spur gearbox and...

Read More »
Weld-On Plate enhances John Deere 500 Series loader functionality.

Weld-On Plate enhances John Deere 500 Series loader functionality.

Measuring 49.38 x 22.85 in., John Deere 500 Series Weld-on Plate is- formed from 5/16” steel, designed to be welded to existing attachments, and interfaces with John Deere 500 Series loaders that use JD attaching system. Features, including steel cast upper hooks and welded locking pins spaced to OEM specifications, ensure- proper fit when welded to buckets or attachments.

Read More »
Parker Hannifin Extends Range of AC10 VFD to 250 HP

Parker Hannifin Extends Range of AC10 VFD to 250 HP

Charlotte, NC- – The Parker AC10 Variable Frequency Drive, a simple, reliable and economical AC motor speed control, is now available through 250 HP. With features normally only associated with higher specification drives, including sensorless vector mode, output frequency up to 590Hz, and a full 150% overload at 0.5 Hz for 1 minute, AC10 provides an optimized solution for machine builders...

Read More »
Disc Brake Rotors ensure silent brake operation.

Disc Brake Rotors ensure silent brake operation.

Designed to deliver motorsports performance in wide range of everyday road vehicles, HELLA Pagid High Carbon Rotors deliver maximum density for silent brake operation. Rotors are coated to- ensure corrosion protection and- provide optimized heat transfer for cooler running brake system. Friction consistency minimizes risk of stress cracks and permanent deformation. Using- tightest run out...

Read More »

Pratt & Whitney's PurePower® Geared Turbofan(TM) Engine Cited as an Aviation Climate Solution

EAST HARTFORD, Conn.,- – Pratt Whitney's PurePower-® Geared Turbofan™ (GTF) engine was cited as an Aviation Climate Solution by the Air Transport Action Group (ATAG) at the Global Sustainable Aviation Summit in Geneva, Switzerland. Pratt Whitney is a United Technologies Corp. (NYSE:UTX) company. The GTF's engine technology reduces commercial aircraft fuel burn and carbon dioxide emissions...

Read More »
Siemens Receives Major Order for 151-MW Wind Project in the US

Siemens Receives Major Order for 151-MW Wind Project in the US

• 66 Siemens SWT-2.3-108 wind turbines ordered • Expected to power about 50,000 average U.S. homes • Order also includes service and financing Siemens has been awarded an order from Apex Clean Energy to supply, support installation and provide long-term service for 66 wind turbines for the Grant Wind project in Grant County, Oklahoma. The Grant Wind project follows an announcement earlier...

Read More »

GE Announces Co-Development Project for New Asset Performance Management Software Solution for Its Waukesha Gas Engines

• Co-Development Project with Crestwood Midstream Partners LP to Use GE's Asset Performance Management Solution Powered by Predix* • New Software Platform to be Installed in 16 Waukesha VHP Gas Engines at Three Compressor Stations in the Marcellus Shale Area of West Virginia WAUKESHA, WISC. — GE (NYSE: GE) today announced that Crestwood Midstream Partners LP (Crestwood) is the...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics