Servo Motor Controllers work with brushless, brushed DC motors.

Servo Motor Controllers work with brushless, brushed DC motors.

Used to control Pittman brushless and brushed DC motors, BGE Series 4-quadrant positioning motion controllers have integral output stage and offer various modes of operation. Controllers can be operated stand-alone with digital or analog I/O or as- slave in CANopen network with device profile DSP 402, protocol DS 301. With 12–60 Vdc rated input and 4–20 A continuous output current, series...

Read More »
HVAC System VDO Blower Motors replace commercial van parts.

HVAC System VDO Blower Motors replace commercial van parts.

Offered as- direct replacements for utility van parts, VDO HVAC system blower motors incorporate exact electrical connectors required by specific vehicle application. No flying leads or wire splicing is required, and VDO mounting flanges and ventilation tubes are in the same position and configuration as the factory units. Model coverage includes Chevrolet City Express, Dodge / Mercedes...

Read More »
Bonfiglioli and System Logistics S.p.A Partner on Modula, a High-performing, Automatic Warehouse Storage Solution with Different Product Lines That Optimise Space and Increase Efficiency and Productivity

Bonfiglioli and System Logistics S.p.A Partner on Modula, a High-performing, Automatic Warehouse Storage Solution with Different Product Lines That Optimise Space and Increase Efficiency and Productivity

System Logistics S.p.A is a very innovative firm in the industrial automation sector, with a presence in over 20 countries. The company designs and produces machines and complete systems for handling goods inside company/production distribution systems. Modula is the business line of System Logistics that consists of automatic mobile storage systems with trays that save 90% of ground space....

Read More »

Brushless Torque Motor offers choice of integrated encoder.

Supplied in IP40-rated aluminum housing, CM-2600 Series comprises brushless DC motor, optical encoder, and precision bearing system. Unit delivers 26.8 oz-in. torque at 1,125 rpm for 22.3 W of continuous power. Featuring hollow stainless steel shaft with 0.748 in. ID, motor provides 97 oz-in. peak torque and no-load speed of 1,900 rpm. Models are available with- ultra-low distortion sine-cosine...

Read More »
Brushless Motor Pre-Driver IC targets automotive EPS systems.

Brushless Motor Pre-Driver IC targets automotive EPS systems.

Developed to be compliant with ASIL D,- Model TB9081FG is intended for use in electric power steering systems. Device integrates 3-phase pre-driver circuits, fail-safe relay pre-driver circuits, and motor current detection circuits, with range of failure detection circuits, including VB over/under voltage, VCC over/under, over temperature, and short detection.- Housed in 12 x 12 x 1.6 mm LQFP64...

Read More »

Linear Motor enhances machine tool applications.

Along with zero backlash, zero down force, and- reduced cogging,- LinX-® features efficient magnetic design, standalone thermal stability, and ability to achieve IP69K protection. Cylindrical design and magnetic flux deliver efficiency with continuous force from 333–665 N and peak force from 2,136–4,272 N. Able to be used with any servo drive or connected to AMD5x, this linear motor helps...

Read More »
Single Operator Helicopter Handling System suits smaller ships.

Single Operator Helicopter Handling System suits smaller ships.

Addressing size and weight limits of smaller ships, INDAL Manual Aircraft Straighten and Traverse (MAST) system provides- safe and- secure method of maneuvering and traversing helicopters between flight deck and hangar. This single-operator shipboard Helicopter Handling System (HHS) is track based and controlled using- chest pack-mounted Portable Control Unit worn by operator. Unit delivers...

Read More »
Actuator Control features microprocessor-based design.

Actuator Control features microprocessor-based design.

Combining AC to DC switching power supply with regenerative PWM drive, DCH Series is suited for applications requiring control of 12 or 24 Vdc motors when only 115 or 230 Vac power is available. With isolated front end, series is compatible with 0-5 or 0-10 Vdc analog signals from any PLC. True low voltage output allows control over low voltage motors without current spikes or large Bus voltage....

Read More »
Durable V-Belts enhance groundskeeping equipment performance.

Durable V-Belts enhance groundskeeping equipment performance.

With high-strength construction, Xtra Power (XP) Lawn and Garden Kevlar-® corded v-belts enhance performance of power equipment in groundskeeping applications. Another feature, dry cotton wrap,- enables consistent power transmission, reduced slippage when clutching, and enhanced resistance to repeated reverse flexing as well as oil, heat, and cracking. Range of dimensions is available, and...

Read More »
ECPM Motors come in 900 rpm versions.

ECPM Motors come in 900 rpm versions.

Available in 1.5, 2, 3, and 5 hp models, 900 rpm ECPM Motors provide full load motor-only efficiency rating of 92–94%. Units maintain efficiency under partial load, making them suited for variable speed fan applications. Benefit of flux focusing stator and rotator technology is ability to be one full frame size smaller than conventional motors.- Featuring all-ferrite magnet design, motors are...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics