New Mechanical Power Transmission Products

Scotch Yoke Actuators offer torques up to 600,000 lb-in.

Capable of operating ball, butterfly, and plug valves, dampers, or louvers, TRIAC THD Series features symmetrical yoke that delivers max torque at both ends of 90Ã-

Brush/Brushless Servo Motors feature low torque ripple.

Series SE500 consists of 8 brushed servos from 23-500 W, while Series SE600 features 8 low inertia brushless servos from 30-1,500 W, and Series SE700 includes 12 medium inertia brushless servos from 50-7,000 W. Differential Hall signals U, V, and W are standard on SE600 and SE700 units. Torque ripple on these 10-pole servos is 0.3% of rated torque. Series SE500 features 1,000 line differential...

Linear Actuators include 5-phase hybrid stepping motor.

Available with and without anti-rotation guide mechanism, miniature Series DRL comes in 1.1, 1.65, and 2.36 in. sq frame sizes. Actuators use rolled ball screw or ground ball screw and produce 6.7, 22, or 66 lb of force over 1.18, 1.57, or 1.97 in. stroke. Repetitive positioning accuracy is Ã-

Gas Turbine Combustion System reduces NOx emissions.

Dry Low NOx combustion system reduces NOx emissions for company's 12 MW class 10-2 gas turbine from 25 to 15 ppm. Emissions level is guaranteed over operating conditions spanning 50-100% of load and ambient temperature range of -20Ã-

Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications

This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.

Direct Drive Linear Actuator offers dual-mode operation.

Able to operate in position and force modes, I-Force(TM) Series uses non-commutated, linear, coreless, brushless servomotors. Precision positioning is achievable due to 0.05-10 micron, contact-less linear position feedback and built-in linear guide system. Actuators can achieve accelerations above 10 G and cycle rates above 20 Hz. Supplied with digital I-Drive(TM) servo amps, products have 5-50...

Linear Servo Motors offer mounting flexibility.

Suited for positioning and handling operations, P01-48 series comes in compact package that provides direct linear motion without use of belts, cams, or gears. Motors, offered in 22 models with strokes up to 5 ft, have life of over 1 billion cycles. Custom sizes are also available. Equipped with IP-67 connectors that rotate, products deliver peak force up to 135 lb, acceleration to 45 Gs, and...

Winding Drive suits general spooling applications.

Uhing Model RGK3-20-0 rolling ring, traverse winding drive uses injection-molded plastic parts for housing and rolling ring carriers. It offers 110-130 Newtons axial thrust due to bearing assembly design where all 3 thrust rings pivot instead of one. Release lever enables user to slide drive freely on shaft without turning on motor. Linear pitch control mechanism is continuously adjustable from...

Drum Motors solve material handling challenges.

With motor, transmission, and bearings totally enclosed in drum shell, Series BLD conveyor drive systems produce noise levels of 50 dB, meeting OSHA requirements. Rated from 0.11-7.5 hp and running at 96% efficiency, drum motors range in diameter from 3.18-12.6 in. with face widths from 7.8-67 in. Belt speeds range from 23-1,369 fpm. Mounted with 2 brackets, sealed-for-life units are virtually...

Linear Actuators satisfy medium to high duty actuation.

Rolaram Linear Actuators withstand 5-400 kN loads at speeds of up to 7000 mm/min as standard. Three types of lead screws can be used: machine, ball, and roller. Roller screw meets high duty aspect while keeping unit compact. Unit provides high dynamic load carrying capacity along with almost no axial backlash or wear. Electric motor can be mounted in line, at right angles, or parallel to ram...

Pneumatic Rotary Actuators feature flange stop design.

Series AGR is available in 5 bore sizes of .5, .75, 1.0, 1.25, and 1.625 in. with manifold, mid stop, and sensor options. All are rack-and-pinion units with dowel pin embedded in body and 2 internal hard stops in output flange that eliminate pinion breakage. Torque output ranges from 7-310 lb-in. at 100 psi. Units operate with zero backlash at end of rotations. Due to constant torque output and...

Innovative Dampney Coating Systems Suit Even the Most Specialized Applications

Dampney's high performance coating systems provide protection against extreme weather, chemicals, and corrosive environments for atmospheric, immersion, and underground applications. Check out the video to learn more.