Brushless DC Motor is corrosion-resistant.
With OD of 3.25 in. and length of 2.8 in., low voltage motor has power efficiency of 90% and is encased within sealed, stainless steel housing. At its design voltage of 24 Vdc, motor supplies 125 oz-in. of peak torque at stall and no load speed of 6,000 rpm. It is suited for harsh environments, and its magnetic design uses high grade bearings to maximize efficiency for long life in battery...
Read More »Wrap Spring Clutch provides high torque in small package.
Deltran PT DuraLIFE-33(TM) electromagnetic wrap spring clutch brings loads from 0 to full speed in less than 3 ms. It provides 30 lb-in. of torque over life cycle of 1 million actuations. Drop-in capability makes unit suited for office automation applications, such as printers, copiers, or paper cutters. Clutch comes in 1/4 in., 5/16 in., 6 mm, or 8 mm bore sizes with molded connector or 12 in....
Read More »DC Brush Motor reaches speeds of 13,000 rpm.
Thermally rated for operation at up to 130Ã-
Read More »Linear Bearings utilize dry-running technology.
DryLinÃ-® R linear bearings are composed of self-lubricating polymer iglideÃ-® J. With channels that enable flow of dirt and dust, bearings do not need to be sealed. Flat glide pads reduce clearance between liner and shaft, and axial fastener secures bearing tighter to outside housing for added stability. Contact area is increased to 80%, improving overall load capacity. DryLin R bearings...
Read More »Wear - What Wears in Electromagnetic Brakes
Learn the common causes of wear for "fail-safe" brakes and how to prevent wear for safe use.
Read More »Caliper Brake has compact footprint.
Compact, single post, spring-actuated Air ChampÃ-® VC500 works with discs of various sizes and does not reduce brake torque over life of friction facings due to rear amplifier linkage design. Product ships completely assembled and ready to install. It operates at 60 psi and is suited for automotive conveyor systems, converting machines, conveyors and conveying equipment, heavy-duty machinery,...
Read More »Stepper Motor features fully integrated controller.
Simple Step 17 can be set to execute preset string of commands upon power up, including nested loops and execution halt pending switch closure. User can link up to 16 step motors and store up to 16 programs. Simple Step is capable of stand alone operation with no connection to PC. Fully programmable features include up to 256 micro stepping resolution, bipolar control, 2 digital I/O and 2 fixed...
Read More »Positive Return Cams are keyed and doweled.
MilfabÃ-® POS-Z-CAM positive return cams come in 4 models rated from 5-15 tons and can be mounted at any angle up to 15Ã-
Read More »Laser Alignment System improves manufacturing efficiency.
Dual-Axis Microgage 2D can measure horizontally and vertically at same time. It provides straightness, flatness, parallelism, and squareness measurements to 0.001 in. over distances of 50 ft. System will monitor mechanical misalignment and runout, align rails and slides, position machinery sub-assemblies, and align bores and drive shaft mechanisms. It can be attached to PC or laptop for...
Read More »Industrial Engines have hardened components for durability.
Vortec 8100, 8.1 liter, big-block V-8 engine incorporates induction-hardened intake valve seats. Camshaft optimizes performance at 1,800 rpm. Small-block Vortec 5700, 5.7 liter, V-8 engine has exhaust-valve seat inserts and induction-hardened intake-valve seats. Vortec 5000, 5.0 liter, displacement engine works with gasoline, liquid propane, and natural gas. Rated 62 hp, Vortec HO 3000 overhead...
Read More »Tap Aligning Center simplifies hand tapping.
Equipped with No. 2 Morse taper, Tap Aligning Center has spring center used to align taps when hand tapping in lathes or drilling machines. Suited for awkward tapping operations, product does not require user to constantly adjust center. Physical characteristics include hardened 5/16 in. dia center, 1 in. plunger travel, and overall length of approximately 5Ã-½ in.
Read More »Innovative Dampney Coating Systems Suit Even the Most Specialized Applications
Dampney's high performance coating systems provide protection against extreme weather, chemicals, and corrosive environments for atmospheric, immersion, and underground applications. Check out the video to learn more.
Read More »