DC Motors/Gearmotors feature 7-slot skewed armatures.

DC Motors/Gearmotors feature 7-slot skewed armatures.

LO-COGÂ-® Series 8000 brush-commutated DC motors and gearmotors minimize magnetic cogging, promoting smooth, quiet operation. Motors come in 3 lengths and achieve peak torques up to 16.4 oz-in. and speeds to 10,650 rpm. Series GM8000 gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1. They achieve peak torques to 100 oz-in. standard or 160 oz-in. with high-torque...

Read More »
Hybrid Gears solve noise and premature failure issues.

Hybrid Gears solve noise and premature failure issues.

Power-Core(TM) Gears feature crystalline, non-hygroscopic, composite material that is gravity-cast around metal core. Gear teeth are hobbed into outer plastic portion of gear material. Bore machined into metal core secures temperature-resistant, metal-to-metal shaft connection. Metal core helps restrain thermal expansion of plastic portion of gear. It comes in carbon steel, stainless steel, or...

Read More »

Motor Set allows performance comparisons.

Set of 4 same-size motors, measuring 80 mm OD by 35 mm stack length, includes 3-phase ac induction motor, 3-phase brushless PM synchronous motor, 3-phase switched reluctance motor, and 3-phase synchronous reluctance motor. Each is housed in aluminum die-cast frame with common mounting bracket. Optical encoder is provided for commutation events. Continuous output power ranges from 100-250 W...

Read More »
Actuator Assemblies have TFE coating.

Actuator Assemblies have TFE coating.

Lead screw, linear rail, spline shaft, and ScrewRail(TM) actuator assemblies are available with Kerkote(TM) TFE coating, which reduces friction and extends life of maintenance-free assemblies. Coating decreases erratic drag torques and unpredictable wear and provides maximum level of self-lubrication. Dry lubricant will not become paste-like and attract dirt or debris. Assemblies are suited for...

Read More »
Servo Motors suit food and beverage industry.

Servo Motors suit food and beverage industry.

Food-grade MP Series Motors offer continuous stall torque of 14-176 lb-in. and include shaft seal with hardened wear sleeve. They are IP66- and IP67-rated with stainless steel motor shaft and fasteners providing corrosion resistance and protection against liquid contamination. IP67-rated connectors can be rotated 180Â-

Read More »

Linear Actuators include Profibus and DeviceNet versions.

TernaryÂ-® Actuators can be programmed with position, velocity, acceleration, deceleration, and force/torque commands. With stroke lengths of 25-300 mm, 46 mm frame size units feature speeds to 450 mm/sec and forces to 600 N. Rotary version offers gear ratios from 5:1-25:1 and torques up to 6.9 Nm. Featuring stroke lengths of 25-300 mm, 32 mm frame size actuators offer speeds to 900 mm/sec...

Read More »

In-line Planetary Gear Box replaces spur gear boxes.

UPL series in-line planetary gear box features fixed input for ease in mounting to standard NEMA 23, 34, or 42 motors. Rated for 10,000 hrs, series offers ratios up to 100:1 and low backlash of less than 15 arc-min. Product is suited for applications where low-cost synchronous or stepper motors are used. UPL-H Linear Mount Series is also available.

Read More »
Stainless Steel Motors withstand washdown environments.

Stainless Steel Motors withstand washdown environments.

WashguardÂ-® SST(TM) range from 1/3 to 2 hp and 1,750 and 3,450 rpm. All external surfaces such as frames, endbells, mounting base, fan guard, hardware, conduit box, and cover are 300 series stainless steel. Oversized, double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease. Stainless steel T-drains are provided for drainage of condensation while preventing...

Read More »
Motor/Controller Kit offers fully programmable functions.

Motor/Controller Kit offers fully programmable functions.

Simple Step 17 with Designer's Kit includes integrated motor, RS485-RS232 converter card, db-9 female connector cable, switch push button, Opto Sensor, 4-pin connector for converter card, extra wiring for I/O, and CD-ROM. Motor offers automatic execution of stored commands upon power up, fully programmable ramps and speeds, bipolar control, 2 digital I/O and 2 fixed input channels, and up to 85...

Read More »
Brushless DC Motor is suited for machine tool spindles.

Brushless DC Motor is suited for machine tool spindles.

Utilizing voltage of 370 V, 21,000 rpm motor is vibration-free due to its dual plane rotor balancing. Motor design features oversize front and rear bearings and secondary, internally-independent, Hall device tachometer arrangement. Motor measures 7 in. long with 4.875 in. dia and produces up to 14.2 lb-in. of torque at 21,000 rpm; slower speeds yield up to 15 lbs-in. of torque. Product is suited...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics