Self-Clinching Bearings withstand temperatures to 540-
Featuring self-clinch, self-align design, high-temperature plain bearings are available in Graphite Bronze and TeflonÃ-® Bronze for commercial ovens in food operations and institutional kitchens. Bearings withstand shock, vibration, and side load and have Ã-
Read More »
Servo Motors are suited for food grade applications.
Utilizing smooth, finless aluminum housing, Severe Duty SD-Series exceeds IP66 guidelines for complete protection against dust, strong jets of water, and effects of immersion. All other external components are 300 series stainless steel. Design minimizes possible entrapment of food particles with single-piece motor/feedback housing, while non-contact, stainless shaft seal provides protection...
Read More »
Food Grade Servo Motors are made of all-stainless steel.
Suited for use in beef, poultry, dairy, and pharmaceutical industries, SS-Series All-Stainless Servo Motors utilize single-piece tubular housing and round mounting flange to eliminate potential pooling points. All external surfaces are 300 series stainless steel, and design incorporates radiused corners. Use of non-contact, stainless steel shaft seal and redundant o-ring seals protect against...
Read More »
DC Motors provide continuous torque up to 2 oz-in.
Available in lengths of 1.256, 1.556, and 1.901 in. PittmanÃ-® Series 6000(TM) 22 mm brush-commutated motors utilize skewed 5-slot armature design and bonded neodymium iron boron magnets. They achieve max peak torques up to 10.2 oz-in. and speeds up to 8,550 rpm. Modular motor design enables customization with cables, shaft-mounted pulleys and gears, ball bearings, windings, optical encoders,...
Read More »
How To Engineer Precision Miniature Components
This white paper provides an overview into engineering precision miniature components. Design considerations for miniature metal parts include size, shape, and material, precision and finishing.
Read More »
Adapters allow inductive sensors to see around corners.
Right-angle Banking Screw Adapters (BSA) enable non-contact sensors to sense around corners and stop up to 4,600 lb loads. Suited for automation applications, BSA-A devices consist of heat-treat hardened, zinc-plated alloy steel components; threaded barrel; and spring-loaded piston. Sensors trigger on/off with displacement of threaded barrel's piston. Various barrel lengths/diameters, spring...
Read More »
Pin and Sleeve Devices conform to IEC 309 standards.
Watertight plugs, receptacles, connectors, inlets, and mechanical interlock devices provide safe electrical connections in commercial and light industrial environments subject to temperature extremes, vibration, impact, dirt, moisture, corrosive elements, and wash downs. Housings are flame retardant, impact-resistant and non-corrosive Valox and nylon material. Rated to 20, 30, 60, and 100 A,...
Read More »
Brushless Motors achieve zero cogging.
Frameless, Axial Airgap Series AAG offers smooth sinusoidal torque output versus angle and applies to almost any speed range. Motors can be optimized for 3-phase brushless motor controllers from 5-48 V with speeds from 0.1-20,000 rpm. Axial thickness of 5 mm can be achieved at up to 300 mm diameter. Applications include scanning equipment, inspection machines, and small integrated pumps.
Read More »
Compact SAPR Brakes are suited for mobile applications.
Directly coupled to output shaft, SB brake uses spring-applied/pressure-release, wet multiple-disc technology to provide fail-safe brake capability. Wear components are immersed in fluid and environmentally sealed to prevent contamination and corrosion. Constructed with cast iron housing, case hardened steel shaft, and cylindrical bearing, product has max static load-holding capacity of 5,500...
Read More »
Miniature DC Gearmotor features optional encoder.
Measuring 0.63 in. OD x 2.46 in. long, Series HG16 integrates miniature DC motor, geartrain, and encoder assembly. Available in 12 models with voltages of 6, 12, and 24 V, units offer gear ratios of 30:1, 60:1, 120:1, and 240:1 and torque from 3.47-6.94 oz-in. No load speeds range from 390 rpm in 30:1 model down to 60 rpm in 240:1 models. Optional encoder allows user to position gearmotor in...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
