Worm Gear Speed Reducers feature all metal construction.

Worm Gear Speed Reducers feature all metal construction.

Suited for variety of instrumentation applications, A 2Z17, A 2Z18, and A 2Z19 Series provide standard gear ratings from 6:1 to 100:1. Worm gears are phosphor bronze, while hardened worm is steel, and housings are aluminum alloy with black anodized finish. Featuring ball bearing mounted input shaft, units provide breakaway torque of .07-1.12 oz-in. and output torque of 4.5-39 lb-in. Max backlash...

Read More »
Gear Reducer suits endless positioning applications.

Gear Reducer suits endless positioning applications.

Two-stage right-angle gearhead, TPK+, is equipped with alpha TP+ planetary gearhead on output side and features helical-toothed planetary gearhead stage mounted at TPK+ output. Hypoid gearset at input (up to i=10 in single stage) enables product to take place of 3-stage bevel-planetary gearhead. Offered with range of reduction ratios, gearhead offers smooth, vibration-free running with torsional...

Read More »
Gearmotors are reversible for low voltage applications.

Gearmotors are reversible for low voltage applications.

Suited for low voltage motorized display applications, A 3Z16 Series 36 DC Gearmotors are available in 3, 6, and 12 V versions with no load rpm ranges from .5-115 and gear ratios from 4,300:1-16:1. Reversible gearmotors are enclosed in ABS plastic and feature .125 in. steel shafts; 3 V version is supplied with twist-on clip for 2 D-size batteries. Direction of rotation is clockwise facing shaft,...

Read More »
Planetary Gearheads come in NEMA sizes 17, 23, 34, and 42.

Planetary Gearheads come in NEMA sizes 17, 23, 34, and 42.

Incorporating hardened planet gears machined to AGMA 12 tolerances, Series S9117T-, S9123T-, S9134T-, and S9142T- provide torque multiplication, speed reduction, and inertial matching for dc servo, stepper, and brushless servomotors. Each unit is available with low backlash single- and double-stage reductions with gear ratios ranging from 3:1 to 100:1. Offered in shaft diameters from .250-.625...

Read More »
Shaft Supports feature cast aluminum construction.

Shaft Supports feature cast aluminum construction.

Comprised of 10 base- and flange-mounted shaft supports, S64SBAM and S61SFAM Series are produced from cast aluminum and feature steel clamping screws. Metric shaft supports, stocked in base-mount or flange-mount styles, accommodate shaft diameters from 10-25 mm.

Read More »
Roller Chain Drive suits limited space applications.

Roller Chain Drive suits limited space applications.

Molded from Nylatron GS, Model A 6M 7-MT is non-conductive, self-lubricating, and available with .1475 in. or 3.7465 mm pitch. Unit link design eliminates need for master link or special tools for assembly. Each link snaps into next one to form any desired length. Measuring .191 in. wide and .108 in. high, non-corrosive, solvent-resistant drive is suited for stylus or pen assemblies in recorders...

Read More »
Drive System protects against power failures.

Drive System protects against power failures.

Available with feed-through heat sink having IP65 protection or with cold plate to connect with cooling circulation system, ACOPOSmulti drive system eliminates need for fans and climate control units in switching cabinet. Power modules with power regeneration and integrated 24 V auxiliary supply modules protect against power failures. Devices can be connected directly to common dc bus on drive...

Read More »
Severe Duty Motors offer dual voltage design.

Severe Duty Motors offer dual voltage design.

Featuring full cast iron construction and 2-part epoxy paint, Severe Duty Motors provide internal corrosion protection as well as corrosion-resistant hardware. They include Inpro shaft seal on output shaft, Forsheda seal on non-drive end, and normally closed thermostats. Meeting IP55 enclosure protection standards, motors are suited for chemical plants, foundries, pulp and paper mills, waste...

Read More »

Inline Reducers provide ratings exceeding 13 hp.

Offered in sizes 713, 714, and 715, LeCENTRIC industrial-duty, aluminum reducers come in single-stage ratios from 1.3:1 to 10.8:1. Modular construction allows for in field addition of mounting base or output flange. Units can also be used as ratio multipliers with output C-flange options.

Read More »
AC Motors feature finned frame construction.

AC Motors feature finned frame construction.

Totally enclosed, inverter duty Models FL180, FL210, and FL250 feature premium class H insulation, 3 normally closed thermostats, and Corona Free design. Model FL180 incorporates heavy-duty finned aluminum frame, while Models FL210 and FL250 have finned laminated steel frames. Available in NEMA and IEC designs, all motors are suited for IP54 and IP55 washdown applications, and include cast iron...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics