Lightweight Twin Connector provides 100% tie-off for PFLs.
Fall Protectors

Lightweight Twin Connector provides 100% tie-off for PFLs.

Attached to harness webbing below back D-ring, Miller Twin Turbo™ G2 Connector provides continuous, 100% tie-off for Miller TurboLite™ and Miller Turbo T-BAK™ Personal Fall Limiters (PFLs). Webbing Retainer Clip has slot sized to accommodate thicker harness webbing designs, and design makes D-ring free for rescue or for connection to overhead self-retracting lifeline. Also, Webbing Retainer...

Read More »
Display Fastening System uses aluminum profiles and connectors.
Hinges

Display Fastening System uses aluminum profiles and connectors.

With aluminum profiles, connectors, hinges, and accessoriesÂ- for FOGA® Exhibit and Display Fastening System, radii can be created to accommodate curvature of almost any inside, outside, or arch radius application without causing profile deformation. Infinitely variable 360° Hinge permits displays to swing through 360° arc without diminishing strength of fastening system....

Read More »
Mounts

Patriot Solar Group Sets the West for InterSolar 2013

ALBION, Mich. - Patriot Solar Group (PSG) is proud to once again be a part of the Intersolar 2013 exhibition. Having participated in this event the last few years, the entire team at PSG is excited to return. Patriot Solar Group is a racking, and solar mounting systems manufacturer, that is based in Albion Michigan with satellite offices in California and Florida. PSG offers a full line of...

Read More »
Mounts

KB Racking's EkonoRack Receives ETL Certification from Intertek

LOS ANGELES -- KB Racking, a leading North American solar mounting systems company, just completed the certification process of its EkonoRack flat roof mounting system according to the UL-2703 industry standard, as tested and certified by Intertek. Intertek performed extensive system testing on all of the EkonoRack's components in order to classify it according to the UL industry standard. The...

Read More »
Miscellaneous Connectors

Clarkdietrich(TM) Building Systems Receives ICC Evaluation Services Certification for Its C-Sections and Tracks

West Chester, OhioÂ- – ClarkDietrich™ Building Systems has updated their code report for structural C-sections and tracks, ESR-1166P, to meet the IBC 2012 and IRC 2012 Building codes. In addition, the report contains supplements for the 2010 California Building Code and Florida Building Code. The report confirms that C-sections and tracks from ClarkDietrich Building Systems are code...

Read More »
Safety Chain Lanyard helps operators align heavy tools.
Tool and Tool Board Hangers

Safety Chain Lanyard helps operators align heavy tools.

MILLHOG® ET-800 Dual Spring Hanger features 48 in. long safety chain, secured into milled slots on two 8 in. wide x 3/8 in. top and bottom steel plates. Chain is retained by welded covers and rated for 4,500 lb, while each of unit's drawbar springs is rated at 610 lb. Product is designed to limit travel of springs to 3.5 in. and prevent bottoming out, breakage, and personal injury while...

Read More »
Bracket Assemblies aid mounting of speed sensors.
Switches

Bracket Assemblies aid mounting of speed sensors.

Model EZ-3/4 in. Easy Mount Bracket Assemblies are compatible with Electro-Sensors 906 and 932, while EZ-18 mm assemblies work with Electro-Sensors ST420, ST420-LT, ST420-DI, Series 18, and SpeedTalker DN-BH. Designed for applications up to 300 rpm, both units mount directly to tapped shaft. Pulser Disc within CPVC housing provides 8 pulses/revolution. Assemblies are used with speed sensors to...

Read More »
Souriau: 20% of Cadmium Production Already Switched to RoHS Zinc Nickel Plating Line
Nickel

Souriau: 20% of Cadmium Production Already Switched to RoHS Zinc Nickel Plating Line

Last year, Souriau manufactured more than 50% of its 38999 connectors with a RoHS plating, further reinforcing the company's position as industry green leader in the connector market. The company has more than a decade of experience with RoHS Zinc Nickel plating, which is now considered a superior RoHS-compliant alternative to cadmium by the MilAero industry. Souriau has now industrialized this...

Read More »
Electrical Connectors

Split Collet Connectors come in large thread sizes.

Constructed of stainless steel and anodized aluminum, FasMate FN Series can withstand pressures up to 3,500 psi without thread sealant and wrench tightening. In addition to thread port sealing range of 1/8–Â-½ in. NPT, BSPP, BSPT, SAE O-Ring, and ISO O-Ring Metric sizes, units include 3/4 in. NPT, BSPP, BSPT, and -12 (1 1/16–12) SAE O-Ring to meet growing needs of...

Read More »
LP-13 Developed to Reduce HVAC Vibration
Mounts

LP-13 Developed to Reduce HVAC Vibration

The LP-13 Shake Absorber® Vibration Isolation pad, developed by Kellett Enterprises, Inc., has a 3 layer design to reduce vibration and noise under machinery including commercial and residential HVAC units. The vibration is isolated when you place a composite material between the source of vibrationÂ- - your equipment - and the support structure for that equipment. Vibration in one...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics