NMO Mounts feature IP67 compliant housing.
Suitable for automobiles, railway cars and emergency vehicles applications, NMO Mounts enables user to upgrade GPS L1 antennas to dual (L1/L2) and triple (L1/L2/L5) band GNSS antennas. Available for TW3872 (GPS L1/L2, GLONASS G1/G2, BeiDou B1, and Galileo E1) and TW3972 (GPS L1/L2/L5, GLONASS G1/G2/G3, BeiDou B1/B2, Galileo E1/E5a+b + L-band correction) antennas, units meets RoHS and REACH...
Read More »
DAS Absorber and Antenna Holder mitigate PIM.
To optimize installation, PIMinator® Distributed Antenna Systems are available with DASACHOLDER above-ceiling antenna holder. Plastic holder does not interfere with aesthetics of building and does not induce passive intermodulation. Attaching to plastic holder or surrounding structures, DASACABSORBER helps mitigate effects of PIM sources by absorbing reflections on cellular radio...
Read More »Thin Ceiling-Mount Antenna meet global carrier requirements.
Extending 0.33 in. below ceiling, 9.41 in. dia Clarity™ White provides wireless network access in hotels, convention centers, formal spaces, older buildings with low ceilings, and shallow spaces. This DAS omnidirectional antenna, which coversÂ- 608–2,700 MHz cellular bands and carries rating of better than -155 dBc at 2 x 20 W (2 x 43 dBm), is compatible with solid-ceiling...
Read More »
GPS/Multiband Vehicle-Mount Antenna offers magnetic mounting.
Panther series GPSMB501 consists ofÂ- 5 connectors to access 5 antenna solutions: 2 MIMO cellular, 2 dual-band MIMO WLAN, and one global navigation satellite system (GPS plus Glonass). For signal clarity, antenna delivers >40 dB isolation across Wi-Fi® to Wi-Fi ports and >15 dB isolation from LTE-to-LTE ports with VSWR of 55 dB at 1,710 and 2,170 MHz bands and...
Read More »
Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics
To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.
Read More »
Omni-Directional Antenna suits in-building wireless networks.
With PIM rating of less than -150 dBc and coverage from 700–2,700 MHz, HyperLink® HG72705CUPR-NF supports cellular 4G/LTE, Personal Communication Services, and Wi-Fi 802.11b/g wireless networks. Unit can be mounted through single 11/16 in. hole in solid or suspended ceiling that is up to 1 in. thick. Antenna features single 15.7 in. coax lead terminated with N-Female connector....
Read More »
Roof Mounts feature non-penetrating design.
Using 8 x 8 x 16 in. cinderblocks as ballast to avoid damaging roof surface, FRM Series is suited for wireless security surveillance systems, as well as DBS, off-air antenna, satellite internet systems, and point-to-point CCTV signal transmission. FRM-125 features 60 in. mast with 1.25 in. OD, while FRM-166 has 30 in. mast with 1.66 in. OD. In addition, FRM-200 provides 30 in. mast with 2 in. OD....
Read More »
Satellite Dome Mount feature stainless steel construction.
Crafted of polished 316 stainless steel, Model RM-FB100 fits all FB150, FB250, Fleet 33, and Skipper 150 satellite domes. Equipped with 2 clamps that encapsulate double rubber washers, mount secures to 1 in. diameter rail and provides shock adsorption. Electronic cables can be run inside or outside of mount for added flexibility and clean looking installation. Model RM-FB100 is suited for small...
Read More »
Dual Marine Mounts support radar and satellite communications.
Designed to accommodate installations with limited clearance ahead of mount, Model DM3 supports satellite antenna and radome, while Model DM4 supports satellite antenna and open array radar. Units keep radar centered over base plate while providing optimum satellite signal access for satdomes. Constructed from powder-coated marine-grade aluminum, mounts accommodate 14-18 in. satellite domes and...
Read More »Compact In-Vehicle Mobile Antenna Mount integrates GPS.
Larsen brand new Motorola high-frequency mobile antenna mount has integrated active GPS antenna that provides coverage for vehicle tracking and location applications. Operating over frequency range of 27 MHz to 6 GHz, IP65-rated mount has input voltage of 3 or 5 Vdc and provides impedance matching at frequencies above 1 GHz. Device measures 4.5 x 2 x 0.7 in. and features mount center pin that...
Read More »
Wireless Access Point Ceiling Mounts hold Cisco 3500i devices.
Model 1064-00 and 1064-T ceiling mounts, suspended from ceiling structural system, appear as standard 2 x 2 ft ceiling tiles. Cisco 3500i wireless access point is inserted into opening and locked in place using Oberon's locking mechanism. Ceiling-mounted position provides optimal wireless coverage.
Read More »
Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »
