New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Inserts

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. MS3 insert comes with jet-guiding...

Read More »
New ATLAS SpinTite Threaded Inserts Come with Blind Installation Capability
Inserts

New ATLAS SpinTite Threaded Inserts Come with Blind Installation Capability

ATLAS® SpinTite Blind Threaded Inserts are available in half-hex shank low-profile head, rib-wall minimized-profile head, rib-wall low-profile head, thin-wall low-profile head and swaging low-profile head versions. Units are used with panels or sheets of materials such as metal, plastics, and fiberglass with thickness up to 0.51 mm. Suitable for applications such as tubing and extrusions,...

Read More »
New CONFAST Double Expansion Anchor is Made from Zamac Alloy
Anchors

New CONFAST Double Expansion Anchor is Made from Zamac Alloy

CONFAST Double Expansion Anchor features two cones, one with threading and other without threading. Unit is used for anchoring into concrete, brick or block base material. The anchor comes with two spring steel bands that allow expansion of the anchor against concrete at two points. Anchor is resistant to rust and is offered in diameter of ¼, 5/16, 3/8, ½, 5/8, and ¾ in. and hole diameters of...

Read More »
New Kalt TT-4 Table-Top Tripod Features Height-Adjustable Legs
Tripods

New Kalt TT-4 Table-Top Tripod Features Height-Adjustable Legs

Omegabrandess’ Kalt TT-4 Table-Top Tripod is available in red, blue and black colors with a detachable ball head. Unit comes with load weight and net weight of 2.2 lb and 5.04 oz respectively. The tripod can be connected to mobile phones and cameras using standard ¼ in. interface. Unit is suitable for stabilizing the image while recording video.

Read More »
New Three-Axis Gimbal Mount Features Full 360 Degrees Rotation of Each Axis
Mounts

New Three-Axis Gimbal Mount Features Full 360 Degrees Rotation of Each Axis

Optimal Engineering Systems, Inc. announces AU300-AER three-axis Gimbal Mount with 10kg load handling capacity and 300 mm x 300 mm clearance around the roll axis stage. The bi-directional stepper motors with knobs for manual adjustments derives azimuth, elevation and roll axis. Each axis has a low backlash worm gear drives, precision "V" groove, cross roller bearings, repeatability and positional...

Read More »
HellermannTyton Introduces FlexTack That Can Work With 18 to 50 Pound Cable Ties to Provide Stability
Mounts

HellermannTyton Introduces FlexTack That Can Work With 18 to 50 Pound Cable Ties to Provide Stability

HellermannTyton’s FlexTack cable tie mount adheres to curved and moderately angled surfaces where only a screw mount would do the job. It enables installers to install route wires, cables and hoses in off-limit areas. The product is engineered to be used on varnished, powder coated, bare metal or plastic surfaces. The tie mount is manufactured from heat stabilized PA66 nylon in black and white.

Read More »
New MIL-DTL-26482 Series I Connectors Come with Quick-Disconnect Bayonet Coupling
Connectors

New MIL-DTL-26482 Series I Connectors Come with Quick-Disconnect Bayonet Coupling

Helind’s MIL-DTL-26482 Series I Connectors are offered in off-the-shelf (COTS) and MIL-SPEC versions. Units support a current of up to 23 A and wire gauges ranging from 24 to 12 AWG. The connectors can be operated in -67 to +257°F temperature range and come with either gold-plated solder or crimp contacts. Units are built with aluminum alloy shells and are enforced with resilient neoprene...

Read More »
Fixtureworks to Feature Expanded Product Line at IMTS 2018
Plungers

Fixtureworks to Feature Expanded Product Line at IMTS 2018

Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-432377 at IMTS, September 10-15, 2018 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of all-new bearing wheels, indexing plungers and TG GripSert inserts from Fairlane® Products; Imao® One-Touch...

Read More »
Dixon Valve Launches Loading Arms Features Counterbalance Adjustment Mechanism
Arms

Dixon Valve Launches Loading Arms Features Counterbalance Adjustment Mechanism

Dixon Valve releases Dixon Loading Arms in left and right-hand configurations and can be supplied as complete turnkey assemblies or as an individual component. It is available in custom and standard sizes ranging from 2" to 4". The arms are engineered for smooth movement and minimum effort to balance in multiple positions. It is available with O-ring, V-ring and split-flange swivel joint sealing...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics