New HU5 Inserts from Walter Comes with Protective Negative Chamfer
Increases productivity in rough machining of stainless steels and heat-resistant super alloys and in steel. Used in machining AISI 316 material, Inconel 718 and titanium materials. Offers large seating surface that increases stability and permits greater cutting depths, feed rates, and metal removal rates.
Read More »
New GEN3SYS XT Pro High-Penetration Insert Reduces Changeover and Increases Throughput
Can withstand the extreme heat produced while drilling in structural steel beams or plates in high production facilities. Designed to run effectively in structural steel holders, improving chip formation while reducing vibrations to create a higher quality hole. Comes with proprietary blend of substrate and multilayer AM420 coating and is ideal for structural steel applications.
Read More »
New Ultra-low Profile, Surface Mountable Threaded Inserts Made From Steel with a Tin Plate
Designed and packaged for use on PCBs as same as other SMT components as simplified method of adding threads to PC Boards. Available in 2-56, 4-40 and 6-32 threads with low profile height above the board of only .012”. Ideal for vacuum and mechanical pick-and-place assembly systems.
Read More »
Opening and Closing with Specialty Hinges from Winco
From simple hinges for welding on to multi-joint hinges with complex kinematics, the Winco selection has everything needed for superior door and flap solutions—Including extra functions. You might think that when it comes to opening and closing, all the possibilities of hinges have already been exhausted. Not even close. Winco regularly succeeds in making further improvements to hinges, adding...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »
New E-Z LOCK Connectors Design Allows for Installation in Tight and Confined Spaces
39ASP features large cable range, up to 8/3 and the ¾-inch trade size 74ASP. Offers contractors installation speed in both snap-in and locknut styles. Use with AC, AC90, ACG90, MC, MCI-A, HCFMCI-A and MC-PCS cable.
Read More »
New Unsealed Connectors Include Reduced Mating Force Below 75 N
AMP MCP 18P monoblock connector uses AMP MCP 2.8 contact system. Fits into bulkhead cut-outs and the required secondary locking feature helps to keep contacts aligned. Ideal for bulkhead, in-cabin and fuse-and-relay-box applications.
Read More »
New BH-ADP-ISOARM Supports I/O Voltages of 1.8V to 5.0V Targets
Connects between your JTAG emulator and JTAG connection of target board. Designed to minimize and protect connected devices from ground loop voltage, harsh environments and untested designs. Features serial wire debug and IEEE 1149.1 (JTAG) protocols supported.
Read More »
New TGA330 Series Power Adapters Meets IEC 62368-1 Standards and are RoHS Compliant
Achieves power density greater than 100W/cubic in. and has operating temperature ranging from 0°C to +70°C. Operating at a 90 to 264 VAC universal input and supports operating altitudes up to 5,000 meters. Measuring 7.87” (L) by 3.94” (W) by 1.06” (H) size and is available with either a 19.5V or 24V output.
Read More »
New AU100-ER Two-Axis Gimbal Mount Features 360 Degree Continuous Rotation of Each Axis
Handles load up to 20 kg with a clearance of 300 mm x 300 mm about the roll axis of the stage. Pitch and roll axes are driven by bi-directional stepper motors with knobs. Offers travel speed of 12° per each axis, repeatability and positional accuracy of 18 arc seconds.
Read More »
New D38999 Hermetic Connectors Features Glass Sealing and Stainless Steel Shells
Constructed with stainless steel housing for corrosion resistance and threaded coupling for quick and reliable mating. Provides robust mating cycle, 360-degree EMI-RFI shielding and an operating temperature range of -65 degrees Celsius to 200 degrees Celsius. Features glass-to-metal seal technology to counter changes in temperature and pressure.
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
