Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections
Mounts

Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections

Piab’s Suction Cup Mount comes with interchangeable parts for mix and match mounting system. Unit provides mounting options such as Universal joint, mount (2 x 8/10.5mm), Lock-pin (19mm), and Ball-joint. Offered in lengths from 45 to 200 mm, mount is designed for handling, for instance, automotive body parts or plastic details. Unit’s ball-shaped fastener comes with an optional mechanism and...

Read More »
WAGO Introduces 10 AWG Connectors to Accommodate Larger Conductors
Connectors

WAGO Introduces 10 AWG Connectors to Accommodate Larger Conductors

New 10 AWG 221 high-power splicing connectors feature lever-actuation, clear body, reliable connectors, and 600V rating. Designed for reducing voltage drops, units are ideal for use in high-power lighting, signal systems, and HVAC systems with commercial buildings. Applications include laying larger wires, connections to three-phase sockets, air conditioners, and other larger consumption devices....

Read More »
New Rotatable Connectors from Rampart are Based on VICTREX PEEK Polymers
Connectors

New Rotatable Connectors from Rampart are Based on VICTREX PEEK Polymers

New high pressure-high temperature rotatable electrical connector allow for reliable transmission of power and data without flooding expensive sensor and electronics packaging in the oil and gas industry. The assembly is less prone to breakage and is compatible with industry-standard envelope. Withstanding extreme shock/vibration conditions, the design is structurally strong. Operating...

Read More »
Conta-Clip's New KDS-FP Flange Plate Offers IP66 Ingress Protection
Plates

Conta-Clip's New KDS-FP Flange Plate Offers IP66 Ingress Protection

Conta-Clip’s KDS-FP Flange Plate are available in KDS-FP-2x10/24 and KDS-FP-3 x 10/24 models with up to 20 or 30 configurable frame openings respectively. Consisting of 40 x 110 mm duct that is segmented into up to ten frame openings by snapping frame inlays, the inlays are offered in plain partitions, T-pieces or cross and double cross form.

Read More »
Heilind Electronics Now Stocking Molex's ValuSeal IP65 Wire-to-Wire Connector System
Connectors

Heilind Electronics Now Stocking Molex's ValuSeal IP65 Wire-to-Wire Connector System

The Molex ValuSeal Wire-to-Wire Connector System is an IP65-rated, highly reliable sealed connector system. WILMINGTON, MASS. (PRWEB) APRIL 16, 2018 Heilind Electronics, a leading global distributor of electronic components and Molex’s largest authorized distributor in the Americas, has expanded its selection of interconnect solutions with the company’s ValuSeal wire-to-wire connector...

Read More »
Heilind Electronics Now Stocking TE Connectivity's CDFP Connector and Cage Assemblies
Connectors

Heilind Electronics Now Stocking TE Connectivity's CDFP Connector and Cage Assemblies

CDFP connectors and cage assemblies deliver greater bandwidth and space efficiency WILMINGTON, MASS. (PRWEB) APRIL 12, 2018 Heilind Electronics, a leading global distributor of electronic components and authorized distributor for TE Connectivity (TE), a global leader in connectivity and sensors, announced today the addition of CDFP connectors and cage assemblies to their inventory. With 16...

Read More »
New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features
Plates

New Radial Loc-N-Load™ Fixture Plate Uses CMM Palletization Features

Radial Loc-N-Load™ Aluminum Fixture Plate is available in 12, 18 or 30 in. rail and plate combinations with 8 in. diameter and 1/2 in. thick black hard anodized aluminum with 1/4-20 threaded holes. The plate comes with laser marked rings for simplifying process of aligning parts. Unit interlocks magnetically and can be installed on all CMMS. The fixture plate allows creation of multiple...

Read More »
Latest M40 Connectors from Harwin are Suitable for Prototyping or Small Volume Runs
Connectors

Latest M40 Connectors from Harwin are Suitable for Prototyping or Small Volume Runs

Harwin’s new M40 connectors come with phosphor bronze contacts rated for up to 1A. The connectors are lightweight and have low profile at 1mm pitch units. Available in both single and double row options, the connectors can be mounted either vertically or horizontally. Characteristic features are 50 mate/un-mate cycles, insulation resistance of 100MΩ, and operational temperature range of...

Read More »

All Topics