New Synergy AE-CLOUD2 Kit Comes with Built-In GPS Support
Kits

New Synergy AE-CLOUD2 Kit Comes with Built-In GPS Support

Renesas’ Synergy™ AE-CLOUD2 Kit consists of a Synergy S5D9 MCU baseboard, tri-mode cellular modem with cellular and GPS antennas, Wi-Fi, Ethernet and sensors. The unit is designed for connecting IoT sensor devices to enterprise cloud service providers for asset tracking, retail and agriculture, smart cities/utilities and mobile healthcare. The kit’s cellular module supports 4G/LTE Cat-M1,...

Read More »
New Loc-Torus II Remote Connector System Enables Operator to Connect Wireline Tool String Without Personnel into Danger Zone
Connectors

New Loc-Torus II Remote Connector System Enables Operator to Connect Wireline Tool String Without Personnel into Danger Zone

The Loc-Torus II Remote Connector System is available in 10k and 15k versions and is designed for use in between wireline pressure control and crown valve in a hydraulic fracturing application. The unit consists of failsafe, spring locking connectors and anchored, plug and play umbilical bundle. It enables the operator to continue pressure pumping when tool string is removed. The connector...

Read More »
Sponsored

Electric Vehicle Part 1

Highlighting about the new Corporate Average Fuel Economy (CAFE) standard that came into place in the United States, this paper explains the functioning of plug-in electric vehicles (EVs) and the ways they are charged. It overviews the rise in demand of EVs in order to meet the new CAFE standards, and throws light on Quail Electronics' SAE J1772 level 2 plug that could meet the high rising demands. Paper details that as there is a huge hike in hybrid users the number of charging stations in the United States is also increased, and points that based upon the need, building a charging station has become an optional as the power cords are available in several different lengths. It includes the advantages of EVs like less moving parts, clean, less breakdowns, and less pollution, and concludes that though the electric vehicles are not new to the market the new technologies are turning them into a better one.

Read More »
New Adapter Kits Facilitate More Efficient Lifting
Adapters

New Adapter Kits Facilitate More Efficient Lifting

Stertil-Koni's two newest adapter kits are engineered for improved efficiency in bus and truck support. They provide more efficient lift by engaging the front and rear lifting points on buses and trucks, offering support for a larger range of axles. One of the new adapters ktis has been engineered expressly for transit buses, while the other is capable of supporting both trucks and school...

Read More »
Parallel Board-to-Board Connectors Feature Removable Caps for Low Profile SMT Connections
Connectors

Parallel Board-to-Board Connectors Feature Removable Caps for Low Profile SMT Connections

Mill-Max's new Horizontal SMT headers and sockets offer removable plastic caps that are capable of creating an interconnect system with minimal surface mount profile. The connectors feature an above-board profile of .096" wiht cap in place and .072" with the cap removed. They are single row with .100" pin spacing and are availble with 2-10 positions. These connectors are suitable for...

Read More »
New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components
Inserts

New WSM01 Grade with MS3 Geometry is Suitable for Machining Unstable or Thin-Walled Components

Walter offers WSM01 Grade coupled with MS3 negative geometry for producing burr-free results with an improved surface finish quality in the hard materials. The grade's high power impulse magnetron sputtering PVD coating produces smooth surfaces. The Unit is suitable for machining ISO S materials such as titanium alloys, cobalt-based alloys and nickel-based alloys. The MS3 insert comes with...

Read More »
Polyplastics Uses Computer-Aided Engineering (CAE) to Forecast Part Deformation During Production of LCP Connectors
Connectors

Polyplastics Uses Computer-Aided Engineering (CAE) to Forecast Part Deformation During Production of LCP Connectors

TOKYO, July 18, 2018 - Polyplastics Co., Ltd., a leading global supplier of engineering thermoplastics, is successfully utilizing computer-aided engineering (CAE) analysis to forecast part deformation during the reflow process when manufacturing connector parts made of liquid crystal polymer (LCP). These LCP connectors are finding growing use in mobile devices such as smartphones and...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics