TE Connectivity to Showcase High-Speed Innovations at DesignCon 2019
Live demos will show the latest developments in high-speed system solutions Harrisburg, Pa., Dec. 14, 2018 /PRNewswire/ -- TE Connectivity (TE), a world leader in connectivity and sensors, will showcase a broad range of industry-leading high-speed data communications connectivity solutions in booth 817 at the DesignCon 2019 expo Jan. 30-31 in Santa Clara, California. TE offers a full...
Read More »
New Zinc Thunderstud Wedge Anchors are Suitable for Light to Heavy-Duty Fastening Purposes
The Zinc Thunderstud Wedge Anchors are available in diameters ranging from 1/4 to 1-1/4 in. and lengths in 1-3/4 to 12 in. range. The units come with patented universal clip and partial threads and are offered with correct size and quantities of nuts and washers. The anchors are used for application in solid concrete for indoor, dry environments.
Read More »
Developed for the US NAVY, Ralston Instruments Quick-Test™ USN Line of Hoses and Adapters Now Available for Industrial Use
NEWBURY, Ohio, Dec. 6, 2018 /PRNewswire/ -- Ralston Instruments, a leader in the advancement of pressure calibration equipment, has just released the Ralston Quick-test™ USN line of hoses & adapters. Made in the USA from military-grade 316 stainless steel, the new USN adapters provide access to existing high pressure ports with a click-in, click-out quick-connect without the threat of...
Read More »
New Inserts Available in Three Different Geometries
The Walter WMP45G Tiger-tec Gold grade are new round indexable inserts for the F2334R copy milling cutter. The inserts is available in three different geometries of D57, D67 and F67 in order to suit various machines, clamping arrangements and workpiece geometries. The WMP45G grade was designed for turbine blade machining as they can handle both face milling and copy milling of martensitic and...
Read More »
Rack System Design & Buyer's Guide
There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.
Read More »
Southco Launches E6 Constant Torque Hinges That Offer Consistent Operating Efforts
The E6 Constant Torque Hinges offer constant resistance throughout the entire range of motion that allows user to easily position doors, display screens and mounted components. The hinge is constructed of plastic and stainless steel and is offered with both symmetric and asymmetric torque. The units are designed for use in corrosive environment and can be operated at desired angle- fully opened,...
Read More »
Keyssa Reinvents I/O to Pave the Path for New Consumer and Industrial Product Designs
CAMPBELL, Calif., Nov. 19, 2018 /PRNewswire/ -- Keyssa®, the leader in high-speed, contactless connectivity, today announced its Virtual Pipe I/O (VPIO) architecture that enables I/O to scale with processor/memory performance and allows product designers to develop new classes of products. Additionally, Keyssa's previously announced next-generation solid-state connector, the KSS104M is...
Read More »
New Electrical Box Brackets Allow for Mounting Without a Raised Cover
The 9016R and 9024R are the two models of open center brackets for electrical boxes now available from RACO, part of Hubbell Commercial Construction. The 9016R is for 16 inch stud spacing and the 9024R is for 24 inch stud spacing. The brackets feature an opening allowing for either 4 inch or 4-11/16 inch electrical boxes to be mounted anywhere without a raised cover. Both brackets can be used on...
Read More »
New FRM Series Roof Mounts Eliminate the Need for Lift/Bucket Service Calls
The FRM Series Non-Penetrating Roof Mounts are suitable for wireless security surveillance systems, off-air antenna and satellite internet systems. The units are available in FRM-125, FRM-166 and FRM-200 models with 35 x 35 x 60.5 in., 35 x 35 x 30.5 in., 35 x 35 in x 30.5 in. dimensions respectively. The mounts utilize 8 x 8 x 16 in. cinderblocks as ballast and are constructed of steel and uses...
Read More »Winsted Corporation Releases New Sky Track Monitor Walls to Mount Monitors on Walls Where Mounting is Not an Option
The Sky Track Monitor Wall features monitor mounts, a removable panel, a leveling foot for height adjustments, a customizable steel angle, two mounting contact points and the ability to control monitor viewing distances. The product is measured at 1.5 inches by 3 inches for horizontal extrusion for structural support and 1.5 inches by 1.5 inches for vertical extrusions to mount monitors.
Read More »
Apex Tool Group Releases the New X-Core Pinless Universal-Joint Extensions and Socket Extensions for Automotive and Industrial Applications
The X-Core is a four-lug ball-and-socket that features a 3/8 inch drive, laser-etched markings for size identification and a 30-degree flex angle with 360-degree rotation. The product in available in sizes ranging from 8mm to 15mm and in two three-piece sets.
Read More »
The Precision Alliance Introduces New Curved Linear Rail Guides: the CR40 Series
For the ultimate in precision open and closed loop guided motion systems, TPA is the leader in curved rail, liner guides. We specialize in engineering excellence, with products that exhibit an elevated level of precision, delivering robust performance, even under the most challenging conditions. See our video to learn more.
Read More »
