
Lead Assemblies handle high voltages.
Hi/Mate 12 gauge contact lead assemblies for MIL-C-38999 Series I, III, and IV connectors withstand up to 13.5 kVdc, commonly found in densely packaged, high-voltage power supplies, CRTs, and TWTs. Assemblies are terminated with Hi Voltage FEP cables. Insertion and removal procedures use same tools as standard 38999 connector. Lead assemblies are electrically isolated from connector shell and can...
Read More »
Industrial Ethernet Connectors meet IP67 watertight rating.
Variosub RJ-45 connectors are suitable for fast Ethernet transmissions at 100 Mbps in accordance with Class D or Category 5 of EN 50173. Protects against dirt and moisture, withstands adverse conditions associated with use on machinery and industrial installations, and protects RJ-45 contact insert. Connector is protected against forces pulling mounting and hood sides apart, pulling cables out of...
Read More »
Pin and Sleeve Connectors carry CE mark.
EPIC(R) Pin and Sleeve Connectors conform to IEC 309-2, and are available in North American and International configurations. North American devices are available in 20, 30, 60, and 100 A, while international devices are available in 16, 32, 63, and 125 A. Both versions are available in splash proof (IP44) and watertight (IP67) models. All North American products are UL (UL1682 and UL1686) and...
Read More »
Interface connects to any PLC.
QuickBloc Universal PLC interface has 8 or 16 channels, connects to any manufacturer's PLC, and has choice of screw or tension clamp technology. It comes with terminals, pre-wired cable with flying leads ready to attach to any PLC's front panel adapter, and pre-printed marking tags. Options are available for fusing, analog signals, and PCB versions that use pluggable cable system.
Read More »
Hot Forging Process
Check out this white paper to learn about the benefits of hot forging.
Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.
Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...
Read More »
Connector System eliminates wire stripping.
MTA-50 family of insulation displacement contact (IDC) style connectors have 0.050 in. contact centerlines in single, staggered row. This reduces board space for wire-to-board connectors while simplifying wire termination. Pre-loaded IDC contacts eliminate need for wire stripping and accommodate manual or semi-automatic assembly. Connectors are available in 2 to 28 contact positions and accept 26...
Read More »
Square Inserts are used for laser leveling equipment.
Threaded inserts are made from stainless steel bar stock and have outside dimensions of 0.630 in. square. Two flanges spaced 0.065 in. apart allow for mounting to equipment. Parts have internal 1/4-20 UNC thread to accept male threaded part. Dimensions are held to ±0.005 in.
Read More »
Plastic Arbor Shims are color coded.
Plastic Arbor Shims, for light- to medium-duty spacing, are non-conductive, non-marring, and non-magnetic. They resist oil and corrosion, and are suitable for spacing of milling cutters, gang cutters, saws, and grinding tools. Offered in 13 different thicknesses and in 12 I.D. and O.D. combinations, shims from .001 to .005 in. thick are made from polyester material, and shims from .0075 to .030...
Read More »
Air Lifts use normal shop compressed air.
Aero-Pallets and Aero-Planks utilize Air-Film technology, which allows omni-directional movement and positioning in tight spaces on loads from 500 lbs to 5,000 tons without causing floor damage. Steering and positioning control is provided via products' Guide Wheel designs. Flat deck (as thin as 2 in. height off of ground) slips under loads and provides its own lift with shop compressed air.
Read More »
Aluminum Saddle mounts cold plates to electronic boards.
Aluminum Saddle has through or tapped holes for securing company's CP-20 Extended Surface cold plates to electronic boards. It applies consistent force across cold plate, ensuring good thermal connection. All-aluminum cold plates consist of connector tubes welded to micro-channel aluminum extrusion. They can be used with EGW, refrigerant, Fluorinert(R), and other fluids to remove heat from high...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »