Vibration Isolator features cleanroom compatibility.
Mounts

Vibration Isolator features cleanroom compatibility.

Providing 2,000 lb load capacity, S-2000AC Stabilizer(TM) Cleanroom Isolator is suited for isolating optical tables, large inspection equipment, and heavy machinery. Hybrid-chamber design maximizes isolation bandwidth and stability, while leveling function optimizes repositioning after disturbance, and laminar flow damping minimizes amplification at resonance. Available in 16-28 in. heights,...

Read More »
Martel Quik-Test(TM) Pneumatic Kit
Calibrators

Martel Quik-Test(TM) Pneumatic Kit

Derry, NH, November 20, 2009. Martel Electronics Corporation continues to work to make the job of instrument calibration easier, by offering a complete line of tool-less calibration connection fittings. That's right, only finger tight is required for a calibration-good seal from vacuum to 5,000 PSI (350 Bar). The basic Martel Quik-Test(TM) pneumatic kit (QCN-100P) includes connectors for both...

Read More »
Flat Panel Monitor Arm supports multiple displays.
Mounts

Flat Panel Monitor Arm supports multiple displays.

Eyesite(TM) arm supports up to 3 monitors up to 24 in. in 16:9 or 4:3 formats. It is suited for active environments, where users can align multiple displays on single plane and articulate them vertically and focally as 1 unit, as well as passive environments where multiple monitors can be arranged in wraparound cockpit effect. Device features tilt-adjustment with incremental positioning, clamps...

Read More »
Connectors

Connector Inserts optimize EPBX connector contact density.

Inserts for EPXB and QM connectors are available in high-density 48 size 22 contacts and 69 size 24 contacts arrangements. Available in environmentally sealed or unsealed versions, both offer optimized space for signal contacts and are compatible with existing crimp and PC tail contacts. Configuration promotes integration flexibility for designers while maintaining form factor of existing EPXB...

Read More »
Electrical Performance of an Organic, Z-Interconnect, Flip-Chip Substrate
Sponsored

Electrical Performance of an Organic, Z-Interconnect, Flip-Chip Substrate

This paper reviews a new technology for building a Z-interconnect flip chip substrate with large clearances in planes and embedded resistors with sufficient flatness on subsequent metal layers. Requirements that must be met by an organic substrate to achieve electric performance goals are listed. The different layers of the substrate are illustrated with the help of diagrams and the stack-up process is described. Design aspects of the test vehicles created using the Z-interconnect building blocks are described, and the outcomes of the mixed dielectric and homogenous dielectric stack-up methods are studied with the help of illustrations. Lamination procedure of the 16 layer interconnect composite is reviewed. Photographs and micrographs of the joining cores are incorporated, and the electrical performance of the embedded resistors with mixed and single dielectrics is presented in the form of a table.

Read More »
Mechanical Seal Rings and Faces seal liquids and gases.
Mechanical Seals

Mechanical Seal Rings and Faces seal liquids and gases.

Manufactured to specifications using carbon-graphite materials, Metcar Mechanical Seal Primary Rings and Seal Faces come in antimony impregnated grades, which offer self-lubricating properties and are suited for running in volatile hydrocarbons. Nickel chrome impregnated grades are suitable for high pressure, liquid lubricated, lift off seals. Offering dimensional tolerances as close as 0.0005...

Read More »
New Yoke Sizes Meet Industry Demand
Beams

New Yoke Sizes Meet Industry Demand

Omaha, NE - Recognizing the need for an increased variety of yoke sizes within numerous industries, G&G Manufacturing has expanded its product line. For example, 12 new sizes have been added to the Square Bore Yoke, six to the Shear Pin Yoke, and five to the Slip Sleeve Yoke. Sales Manager Lowell Eipperle said, Our customers are one of the most accurate barometers available when it comes to...

Read More »
Suspension System supports HMI enclosures up to 281 lb.
Mounts

Suspension System supports HMI enclosures up to 281 lb.

SYSPEND(TM) 281-MAX HMI Suspension System is suited for supported/repositioning HMI enclosures and devices. It consists of varying lengths of aluminum tubes, elbows, and adapters. Tubing provides structural integrity and acts as conduit for equipment wiring, and has vertical motion design allowing height-adjustment for pedestal mounting. Ergonomic solution allows operators to move controls into...

Read More »
Shock Absorbing Bumpers come in tapped and threaded models.
Bumpers

Shock Absorbing Bumpers come in tapped and threaded models.

Designed for factory automation and motion control machinery, Shock Absorbing Bumpers mitigate shock, sound, and vibration caused by moving machine parts as they strike targeted surface. Units combine flexible gel for cushioning with stainless steel core. Offering abrasion and light oil resistance, urethane-based rubber material has Asker F hardness rating of 75. Following compression, bumpers...

Read More »
Mounting Components are designed for small optics.
Mounts

Mounting Components are designed for small optics.

Able to integrate smaller optics ranging from 3-12.5 mm in dia, S-Mount product line is comprised of simple and achromatic lens mounts, various tubes and spacers, and various adapters, including S-to-C type. Products feature adjustable thickness and are threaded for M12 x 0.5 mm mounting, commonly used for micro-video lenses and board level camera mounts. Manufactured from anodized aluminum...

Read More »

All Topics