Mechanical Power Transmission

Mechanical Power Transmission

Brake is designed for demanding applications.

Dec 18, 2001

XTREME TORQUE Model XT-58B is 16.3 in. high and 2.44 in. in diameter with holding torque of 60 in.lbs. XT Series clutches and brakes consistently offer coefficients of friction between 0.75 and 0.95. Applications include robotics, computer chip and clean room handling equipment, automation machinery, and material handling equipment. Read More

Mechanical Power Transmission

Engine is suitable for industrial tasks.

Dec 17, 2001

Vortec 1600 1.6-liter, single overhead cam, inline 4-cylinder engine includes 79 mm bore by 81.5 mm stroke, 9.4:1 compression ratio, and cast aluminum cylinder head with valve seat inserts. Iron block is used for strength and durability. Vortec 1600 also features distributorless ignition system and 1598 cc displacement. Vortec 1600 is adaptable for use with gasoline, liquid propane (LP) or... Read More

Mechanical Power Transmission

Servo Motors are IP-65 washdown capable.

Dec 17, 2001

Washdown capable servo-motors utilize IP-65 compatible components in wiring connector and all joints, as well as stainless steel sealed bearings and shafts. Replaceable brushes are protected using 0-rings in brush cap. Features include stainless steel ABEC-3 (or better) bearings, precision machined 6061 aluminum endcaps, plated solid steel housings, micro-balanced skewed armatures, and 24-hour... Read More

Mechanical Power Transmission

Gearheads and Actuators offer precise motion control.

Dec 13, 2001

PS Series Flange Output (PSF) and Shaft Output (PSS) gearheads and actuators feature zero-backlash and high torque of harmonic drive gearing. They are available with range of input options and offer flexible integration allowing use with most servo or stepper motors. Units provide positional accuracy of less than 1 arc min and transmit torque loads up to 2900 in-lb. Ratios are available ranging... Read More

Mechanical Power Transmission

Brushless DC Motor has integrated electronic controller.

Dec 13, 2001

Totally enclosed in all-aluminum case, TAM58-2E Industrial Series motors conform to IP44 construction and NEMA Size 23 mounting standards. Motors work well in damp, dusty and harsh environments, and have maintenance-free ball bearings. They are suitable for use in applications such as automated conveyor systems, bar code labeling, printing, pumps, valves and machine tools. Rated torque ranges... Read More

Mechanical Power Transmission

Linear Actuator provides precise positioning.

Dec 12, 2001

Size 23 hybrid linear actuator has 0.002 in. per step resolution, speeds of 7 in./sec, and is available in captive, non-captive, external linear, and linear rotary. It has thermoplastic rotor drive nut, stainless steel Acme lead screw, and is available with finer threads for thrusts up to 200 lb. Typical applications include medical equipment, X-Y tables, semiconductor handling, telecommunication... Read More

Mechanical Power Transmission

Slotless Motors are suitable for hand tools and robotics.

Dec 11, 2001

Slotless, brushless, DC motors feature slotless stator winding and rotor construction, which provide zero cogging torque and vibration. Stator winding of high density copper positioned inside toothless stator ring creates no preferred rotor position and reduces audible noise. Nominal frame sizes range from 1.4 to 5.8 in. dia, achieving speeds up to 50,000 rpm with torque constants to over 600... Read More

Mechanical Power Transmission

AC Motor is for use in general-purpose applications.

Dec 11, 2001

Reliance® CALIBRE(TM) general-purpose AC Motor is available in horsepower ratings ranging from 3 to 50. Available in horizontal foot-mounted configuration, with optional C Face designs, product is EPAct compliant, and comes with TEFC enclosure in 3600, 1800, or 1200 RPM speeds. It is offered with voltage ratings at 3 Phase, 60 Hertz, or 50-Hertz power systems. Read More

Mechanical Power Transmission

Alignment Stages position fibers/components to within 10 nm.

Dec 11, 2001

Pneumatic linear translation stages for fiber-alignment applications provide 2 µm repeatable movement of loads up to 50 kg. Designed specifically for process-automation applications, stages are suited for load/unload positioning and for positioning accessories like adhesive dispensing and curing equipment. Adjustable end stops and pneumatic stages can move equipment up to 75 mm. Cross-roller... Read More

Mechanical Power Transmission

HVAC Drives can be programmed for any application.

Dec 05, 2001

MCH Series can be used for centrifugal fans, blowers, pumps and cooling towers. Programming is via front panel keypad and 32-character, 2-line, English language backlit display. Drives have PID control, V/Hz profile for centrifugal loads, 66 programmable parameters, and RS485 communications. Options include input disconnect or circuit breaker, line reactor, and manual or automatic three-contactor... Read More

Controls & Controllers, Mechanical Power Transmission

Worm Gear Drives provide ratios from 1:1 to 60:1.

Dec 05, 2001

DAW Series multi-speed transmissions will shift on-the-fly under full load. Model DAW is rated at up to 50 input HP at 1800 RPM and comes in 4 basic configurations. DAW-S is single input with single output shaft; DAW-SD is single input with dual output shafts that may be solid or split; DAW-DS is single input with dual output shafts and output shafts are coaxial shaft-over-shaft; DAW-SI is single... Read More

Mechanical Power Transmission

Linear Actuators suit rapid motion applications.

Dec 05, 2001

Size 17 hybrid linear actuators are available with 0.9° step angle, designed for higher resolution, allowing for full step linear movement of 0.00006 in. (1.5 microns). They are available in 4 designs: captive, non-captive, external linear, and linear rotary. Complete product line has resolutions ranging from 0.00006 to 0.002 in. per step, with operational thrust capabilities of up to 50 lbs. Read More

Mechanical Power Transmission

Servo Motors feature internal Hall sensor feedback.

Dec 04, 2001

ELCOM ST(TM) slotted brushless DC servo motors, with 6-slot lamination design, are available in stack lengths of 1/2, 1, 1 1/2, and 2 in. All have 4-pole rotor featuring neodymium iron-bore magnets. Continuous torque output up to 49 oz-in. can be achieved with motor speeds up to 8,000 RPM and power output up to 188 watts. Mounting configuration is consistent with NEMA 23 standards. Read More

Controls & Controllers, Mechanical Power Transmission

Drum Motor Drives drive food conveyors.

Nov 27, 2001

Internally powered drum motors are available with USDA Dairy 304 or 316 stainless steel shell, shafts and end flanges that resist corrosion and contamination prohibited in food industry. Each motor is filled with food grade oil and hermetically sealed, making it suitable for applications requiring daily high-pressure washdown and acid or alkaline power washings. Drives have sprockets for driving... Read More

Mechanical Power Transmission

Direct Drive Motor comes in two parts.

Nov 26, 2001

Brushless ULT frameless motor has separate rotor and stator that can be integrated into precision mechanical assemblies. Low profile motor has axial lengths as small as 10 mm, diameters up to 165 mm, and through holes up to 120 mm, making it suitable for direct drive rotary applications. Models are available with 30 to 600 oz-in of torque output. Its three phase motor will run on any sinusoidal... Read More

Mechanical Power Transmission

Lube-free Chain exceeds ANSI specs.

Nov 21, 2001

Xceeder Chain has oil-impregnated felt seals that keep dirt out and lubrication in for increased wear life. Drive, conveyor, and attachment chains are available in sizes 40 to 100, are interchangeable with ANSI standard chain, and work with standard sprockets. They handle same maximum loads as ANSI standard chain, and exceed ANSI minimum tensile strength requirements. Read More

Mechanical Power Transmission

Servomotor eliminates dithering.

Nov 19, 2001

SilverMax 34HC has Anti-Hunt mode which eliminates servo dithering and allows motor to remain motionless while maintaining target position. Motor has 3200 in.-oz of torque, maximum power of 600 W, and is available in 4 stack lengths. System combines motor, controller, driver, encoder, serial communications and 7 configurable I/O. It can be programmed for applications requiring electronic clutch,... Read More

Mechanical Power Transmission

Efficient Motor is for process industry applications.

Nov 19, 2001

M3000 motor qualifies for highest European efficiency class (eff1). Improved cooling doubles life of bearings and windings, gives longer component life and protects motor from overheating, even when covered with dust. Large terminal box and terminal board enable easy installation. Motors are available in IEC frame sizes 112 to 400 rated at 4 to 710 kW. Cast-iron enclosure is standard for frame... Read More

Mechanical Power Transmission

Gearing Components fit in small enclosures.

Nov 17, 2001

Ultra-flat CSD series harmonic drive gearing component sets use S-shaped tooth profile and are 50% shorter than previous CSF series, allowing surrounding enclosure to be made very compact. It has rated torque of 248 in-lb, maximum torque of 673 in-lb, and is available in gear ratios of 50, 100 and 160:1. Applications include robotics, aerospace, and factory automation. Read More

Mechanical Power Transmission

Smart Drive controls winders and rewinders.

Nov 15, 2001

URC Unwind/Rewind Control measures outside diameter, mass, and inertia of coil every revolution. When coil reaches user-defined diameter, system enables or disables events, based on customer specs. Program is embedded within controller of company's drive, eliminating need for external control rack. When used with programmable controller, drive forms work cell that can stand alone or be integrated... Read More