New Mechanical Power Transmission Products

Oriental Motor Expands BMU and BLE2 Series DC Motor With Parallel Shaft

Brushless DC Motors are available in 30 W (1/25 HP), 60 W (1/12 HP) and 120 W (1/6 HP) power output. Includes H1 food-grade grease in gearhead for applications intended for food processing or packaging. Offer IP66 class protection and are equipped with a stainless steel parallel motor shaft.

New Three-phase AC Induction Motors with High Strength Right-angle Hypoid Gearhead

Hypoid gears increase torque while reducing noise due to the surface area utilized. Consists of high-strength bearing on both sides of the gearbox due to which radial and axial loads have increased. Mounted in any direction and are available in combination with 30 W, 40 W and 100 W motor models.

New H1 grease KIIS Series 3-phase Induction Motor with IP66 Class Protection Terminal Box

Available in 60 W (1/12 HP) and 100 W (1/8 HP) power output. Includes H1 food-grade grease in gearhead and a stainless steel output shaft for applications intended for food processing or packaging. Eight gear ratios from 5:1 up to 180:1 with life of gearhead rated at 5,000 hours.

New HPN-L Harmonic Planetary Gearheads is Designed to Pair with Any Servo Motor

Features are peak torque 18 Nm to 300 Nm and reduction ratios form 3:1 to 50:1. Suitable for use in precision motion control and positioning. Available in 14, 20, and 32 frame sizes.

How to Select the Right Sprocket for Your Application

This ebook provides overview on how to select the right sprocket.

New FHA-C Mini 24V Servo Actuator Delivers High Torque with Accuracy and Repeatability

Combines high precision Harmonic Drive® gear component with a pancake brushless servo motor. Offers single turn absolute position at the output without the need for battery back-up. Optional flex-rated cables with sealed connectors.

New Three Surgical Motors Provide Torque and Speed for Drills, Saws and Reamers

B0912N1016, N0912N4023 and B0912N4024 DC motors are designed and tested to withstand 1,000+ sterilization cycles as well as exposure to saline and other foreign materials. 22mm motors are lightweight with low noise and vibration to maximize tactile response and surgeon control in surgeries. Suitable for traditional surgical tools, robotically assisted surgical devices and can be paired with...

Direct Drive Rotary Servo Motors provide 3-160 Nm torque.

Suited for demanding OEM and end-user applications, Series PM-DD includes 13 models covering 5 frame sizes of 135, 175, 230, 290, and 360 mm. Motors provide rated speeds of 150 and 200 rpm with accuracy of Ã-

Feeder Repair Kit negates replacement feeder acquisition.

Able to be installed by end-user, MYDATA Agilis Feeder Repair Set enables conversion of any Agilis feeder to any ofÃ- 4 sizes –Ã- 3.7, 4.0, 4.7, and 5.4 – to reduce feeder count and maximize production. Components include precision-machined aluminum side cover plate with cover tape plow pre-installed, spring, and matching screws for re-assembly. Kit also lets repair feeders with...

Schaeffler Experts Present, Exhibit at CTi's 10th Automotive Transmissions, HEV and EV Drives Symposium and Exhibition

10th International CTi Symposium TROY, Mich. - The International Car Training Institute (CTi) is shifting into the next gear for its 10(th) annual Automotive Transmissions, HEV and EV Drives Symposium and Exhibition. As a lead sponsor for the sixth year, Schaeffler will discuss market-specific trends, the company's advanced transmission solutions, as well as exhibit its key transmission and...

Hybrid Trunnions reduces setup and increase productivity.

Stallion Hybrid trunnions accelerate installation of 3- and 4-jaw chucks, collet chucks, and faceplates without requiring removal of trunnion table. While 9 x 20 in.Ã- model holds 6 in. vise, 9 x 23 in.Ã- model is designed for double- or single-station, 6 in. vises. Sub-plates and quick-change sub-plates are available with quick-change ballocks, standard baseplates allow trunnion assembly...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.