New NORDBLOC.1 Helical Gears are Designed for High Speed and Torque Applications
NORDBLOC.1 Helical Gears are available in five sizes with motor powers ranging from 0.12 to 7.5 kW in flange or foot/flange mounted versions. Units come in FEM-optimised UNICASE corrosion resistant aluminum housing. NORDBLOC.1 gears are suitable for food or pharmaceutical industries. Unit’s bores and mounting faces are machined with precise tolerances to deliver accurate positioning of gear...
Read More »
New EPR and PER Gearboxes Feature Inline Planetary Gearboxes at an Right Angle
EPR and PER right angle bevel planetary gearboxes are available in ratios of 3:1 to 1000:1 in variable sizes and configuration. The gearboxes include a spiral bevel gear input to an inline planetary gear output. The EPR series features three different shaft outputs, a hollow shaft output and a flange output. The PER series has metric or NEMA shaft output and is used in motion control...
Read More »
New Pin Oven Chains are Suitable for High Temperature Applications
Iwis’s Pin Oven Chains are available in flexible or snap-off pin versions with three fixture possibilities such as integrated into outer chain plates, secured with special nuts or fixed with split-pins. The pins feature protective head made of PEEK and are heatproof up to 260°C. Units are wear-resistant and are treated with PWIS-free IPP lubricant.
Read More »
Latest F135 Engine is Now Available with Growth Option 2.0
Pratt & Whitney’s F135 Engine with Growth Option 2.0 upgrade increases power and thermal management system capacity. Unit consists of suite of compressors and turbine technologies with improvements in thrust. Increased PTMS capacity allows F-35 to use an enhanced spectrum of offensive and defensive weapon system technologies. Growth Option 2.0 uses Future Adaptive Spiral Technology approach...
Read More »
Direct Acting High Speed Servo Valve (DASV)
Download this paper to learn about how high performance servo valve's can be used in your most demanding hydraulic and pneumatic applications.
Read More »
New Simotics XP Chemstar Motors are Suitable for Chemical and Petrochemical Industries
Siemens’ Simotics XP Chemstar Motors are available in 0.25 to 500 kW range and are suitable for applications such as pumps, compressors, fans, extruders, agitators and separators. Units come in grey cast iron enclosure and bearing plate and a steel fan cover. The motors are offered with freely selectable options such as reduced start-up current, motor monitoring, reinforced bearings or tropical...
Read More »
New PMDC and Planetary Gear Motors are Qualified to Mil-Spec Fractional Horsepower
Allied Motion’s Mil-Spec PMDC and Planetary Gear Motors are available in model sizes ranging from 19 – 57 mm in diameter with rated speeds of 2400 to 19200 RPM and 3 W to 62 W power rating. Planetary gear motors are rated to 62 Nm output torque.
Read More »
New Electric Failsafe Actuators are Offered with Internal Battery Backup
HRS Series Electric Failsafe Actuators are available in HRS2, HRSN3 and HRSN4 models with up to 440 in-lbs, 1770 in-lbs and 8850 in-lbs torque. Units are offered as stand-alone 24VAC/VDC units or proportional modes and come with internal battery backup and supercapacitor reserve power supplies. The actuators are equipped with 2x volt-free Form A Auxiliary switches and ISO5211 compliant mounting...
Read More »
New StepSERVO Integrated Motors Feature Encoder Feedback and Advanced Control Loops
StepSERVO™ Integrated Motors consist of TSM, SSM and TXM series models. Units support operations on step and direction, streaming commands, fieldbus communications and stored Q programming. TSM series and TXM series motors come with 8 digital inputs, 4 digital outputs and 1 analog input whereas the SSM series with 3 digital inputs, 1 digital output and 1 analog input. These servomotors...
Read More »
Latest RSA-114 Remote Switch Actuator Comes with Enhanced Push Button Operators
CBS ArcSafe’s RSA-114 Remote Switch Actuator is designed for ABB/BBC/ITE LK air circuit breakers. Unit allows technicians to trip or close of ACB remotely from a distance of up to 300 ft. The actuator comes with 24 V DC LED light, wireless video camera system and protective case assembly. Unit is used for protecting and controlling of low-voltage power distribution systems up to 635 V AC and...
Read More »
New Tuohy Borst Adapters Feature Leak-Proof Silicone Gasket
Tuohy Borst Adapters come with female luer lock, tubing connection sideports, barbed and threaded ends and red and blue caps. Units are engineered to prevent backflow of fluid and are suitable for applications requiring large instruments and devices. The adapters feature tinted polycarbonate body and can be customized into specific device design.
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
