Linear Thruster withstands torque up to 885 in. lb.
Actuators

Linear Thruster withstands torque up to 885 in. lb.

DFP combines ball splines and pneumatic cylinders to provide high torque linear thruster. Ball spline doubles as cylinder's piston rod and is preloaded to provide minimal angular deflection of tool plate. Cylinder bore diameters include 10, 16, 25, 32, 50, and 80 mm. DFP thruster is suitable for applications that cannot use larger linear thrusters which utilize tool plate guided by 2 or more...

Read More »
Spline Shafts handle light linear loads.
Shafts

Spline Shafts handle light linear loads.

Lightweight aluminum spline shafts are suitable for applications that require rotary drive or linear guide. Shafts are treated with low-friction TFE coating and coupled with graphite and PTFE-filled thermoplastic bushing. Coating eliminates need for external lubrication and maintenance. Units are available with basic or anti-backlash bushing; plain or thread mount bushing; and 1/4, 3/8, or 1/2...

Read More »
Chains suit conveyor and equipment-related applications.
Chains

Chains suit conveyor and equipment-related applications.

IWIS pre-tensioned chains include MEGAlife maintenance-free roller and conveyor chain, and CR (corrosion-resistant) chain. MEGAlife chain eliminates need for subsequent lubrication, avoiding possible contamination risks to systems and goods associated with chain lubrication in clean or dry environments. CR chain is made from hardened high-alloy steels and offers high strength and fatigue...

Read More »
Motors

Washdown Motors work in high humidity environments

Paint free, stainless steel motors resist water entry, drain condensation, and have smooth motor frame that will not trap food particles that could lead to foodborne illnesses. Motors are available in 1/2, 3/4, 1, 1 1/2, and 2 hp. All operate at 1725 rpm on 208-230/460 Vac power. All are equipped with NEMA C-Face and rigid base and meet National Electrical Manufacturers Associations' MG1, Part 31...

Read More »
Push Button Actuators work on stem-operated valves.
Actuators

Push Button Actuators work on stem-operated valves.

Push buttons can be used on company's stem operated valves, in panel mounting applications, or as stop or limit valve mounted directly on machines or equipment. They are available in flush, extended, or mushroom styles, in variety of colors, and in 3 sizes: 16 mm with 5/8-32 thread, 22 mm with 7/8-32 thread, and 30 mm with 1 3/16-28 thread. Built-in stainless steel spring returns button to...

Read More »
Gearheads and Gearboxes

Gear Drives operate with user supplied keyed shafting.

With rated speeds to 1800 rpm, right angle helical gear drives feature O-ring sealed gear cases, right- or left-hand rotation, and sealed ball bearings. Series S991MY and S991HY are available in ratios of 1:1, 3:2, and 2:1. Designed around 45 deg helical cut gears, they are available with 1/2 to 3/4 in. dia hollow bores. Heavy-duty sealed ball bearing units feature hard anodized aluminum alloy...

Read More »
Vacuum Motors suit processes sensitive to magnetic fields.
Motors

Vacuum Motors suit processes sensitive to magnetic fields.

HR-V and HR-UV Series piezoelectric motors range in size from single element (providing .45 kg of force) to eight element (providing 3.6 kg of force). Suited for use in vacuum environments, HR motors are capable of driving linear and rotary stages. HR-V vacuum series motors are rated to 10E-7 Torr, and HR-UV motors are rated to 10E-10 Torr. Both configurations are suitable for bake out and...

Read More »
Planetary Gearheads mount to any motor.
Gearheads and Gearboxes

Planetary Gearheads mount to any motor.

UltraTRUE(TM) planetary gearheads in 90 and 115 mm sizes are RediMount(TM) compliant and available in both in-line and right angle models. Gearheads have standard 4-arc-min backlash and crowned helical carburized steel gears that are hardened to HRC 60 minimum and flank-finished after heat treating. Gearheads are suitable for material handling, packaging, coil winding, pipe bending, machine...

Read More »
Magnetic Clutch transmits torque without contact.
Clutches

Magnetic Clutch transmits torque without contact.

MDC series permanent magnet synchronous clutch transmits torque from motor to flexible fixture used to automate machining of parts for automotive industry. Clutch uses samarium cobalt permanent magnets assembled on two discs. Since clutch has no touching or wearing components, all maintenance has been eliminated. Clutch is available from 18 to 265 in.-lb. One side can be completely enclosed for...

Read More »
Pillow Block Bearings are suitable for packaging industry.
Bearings

Pillow Block Bearings are suitable for packaging industry.

Inch-sized pillow block bearings are available in sizes from 3/16 to 1 in. ID. Their two-part construction combines polymer spherical bearing and igumid G polymer housing. Combination enables bearing to be self-lubricating and resist abrasion and corrosion. They are suitable for applications such as door hinges and clutch assemblies in automotive, agricultural, and textile industries.

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers