Direct Drive Motors allows large through holes.
Motors

Direct Drive Motors allows large through holes.

ULT Direct Drive motors are available in 64, 127, 165, and 190 mm O.D. with through holes up to 75% of OD. Peak torque is 1800 oz-in. Machine-wound stator coils optimize motor constant and keep axial length to minimum. Single-piece, multi-pole magnets are available with custom hubs, allowing simple integration into rotary stage design. Standard windings are available for 12, 24, and 48 V, and...

Read More »
Servo Drives are immune to phasing and electrical noise.
Motor Controllers and Drives

Servo Drives are immune to phasing and electrical noise.

Kinetix(TM) 6000 servo drives offer fiber optic SERCOS interface digital drive link between drive and controller, which eliminates up to 18 discrete wires per axis. Built-in smart motor technology provides automatic identification of specific motor configurations. Units are available with 230 and 460 V ratings. Kinetix 6000 drives offer velocity bandwidth greater than 400 Hz and current-loop...

Read More »
Caliper Brake is capable of high cyclic duty.
Brakes

Caliper Brake is capable of high cyclic duty.

Spring applied and hydraulically released, Model BD caliper and its compact actuator can be mounted on either side of brake for emergency stopping and/or holding applications. Brake shoes mount with detent pins for quick friction-facing replacement and all pivot pins have life-lubricated pivot-point bearings. Brake is suitable for rapid start/stop applications. Simple design with few seals and...

Read More »
Rotary Actuators offer continuous modulating duty.
Actuators

Rotary Actuators offer continuous modulating duty.

SM-6000 Series electric rotary actuators has operational temperatures of -40 to 185 deg F and automatic torque limiting. Internally mounted digital amplifier, programmed via watertight keypad and vacuum fluorescent display, is mounted on front of unit. Options include extended temperature ranges to 225 deg F and precision contactless feedback. Maximum output speeds range from 10 to 42 sec/90 deg,...

Read More »
Linear Thruster withstands static side loads up to 520 lbs.
Actuators

Linear Thruster withstands static side loads up to 520 lbs.

Extruded Linear Thruster, with 32 mm bore, incorporates stainless-steel guide shafts and composite bushings in unitized body, making it suitable for corrosive or wash-down environments. Body and tooling plate are anodized aluminum. Bushing/guide shaft combination provides smooth motion and heavy-duty load carrying. Stroke lengths are available up to 10 in. in length.

Read More »
Motors employ rare earth magnets.
Motors

Motors employ rare earth magnets.

RE-max 0.94 in. dia motors employ rhombic moving coil design with ironless rotors, which allow for zero cogging. Four versions are available with metal or graphite brushes and single or double shafts. Power ranges vary from 6.5 to 11 W, and continuous torque is rated to 1.7 oz-in. (max). Ambient temperature range is from -22 to 185 deg F, and maximum efficiency is up to 90% depending on the...

Read More »
Right Angle Gearmotor provides high torque.
Motors

Right Angle Gearmotor provides high torque.

M4000 G14 PM DC Series single worm right-angle gearmotor is available in 12 to 180 V models, with continuous torque of 16 to 60 lb-in. and speeds up to 500 rpm. Typical applications are wheelchairs, scooter drives, welding wire feeders, conveyor drives, packaging equipment, and floor cleaning equipment. It has bronze gear, high energy ceramic magnets, ball bearings, Class F insulation, balanced...

Read More »
Bearings

Hybrid Bearings have rolling elements 40% lighter than steel.

Hybrid bearings, including angular-contact ball bearings and cylindrical roller bearing, combine steel raceways with silicon-nitride balls. Dimensionally interchangeable with ISO dimensioned bearings, hybrid bearings provide resistance to wear. They can operate without oil, using process fluid as lubricant. Silicon nitride balls have 50% higher modulus of elasticity than steel, increasing bearing...

Read More »
Miniature Ball Bearings for industrial use.
Bearings

Miniature Ball Bearings for industrial use.

Miniature and instrument size ball bearings are available in 400 and DD type series of stainless steel, as well as 52100 chrome steel. They are supplied in standard industrial bore sizes from 0.0236 to 0.500 in. and metric sizes from 0.6 to 10 mm. Typical applications include medical and dental equipment, computer peripherals, power tools, motion control systems, and scientific and...

Read More »
Linear Actuator transmits thrust actions.
Actuators

Linear Actuator transmits thrust actions.

Compact MaxJac(R) actuator delivers variable speed control for thrust applications such as throttle control, fine lift adjustments, and valve actuation in RVs, commercial cleaning machines, construction equipment, and medical pumps. It has back drivable piston, manual override, and 12 Vdc gearmotor that produces continuous torque of 20 oz-in. Actuator operates at speeds up to 2.2 in/sec and...

Read More »

All Topics