Stepper Motors provide 5-phase motion control.
Motors

Stepper Motors provide 5-phase motion control.

Series PCE High Torque Motors are CE-rated and come in 3 lengths from 33 to 98 mm and standard 17, 23 and 34 NEMA sizes. Units offer dielectric strength of 3,000 V and produce nearly 900 oz-in. holding torque. They feature cast iron exterior and are sealed for protection against dust and moisture. High-resolution performance includes 500 Full Steps per Revolution (.72° per step) and 1,000...

Read More »
AC Gearmotors operate at noise thresholds of 29 dB.
Motors

AC Gearmotors operate at noise thresholds of 29 dB.

V Series AC gearmotors incorporate strengthened shafts that mate to long life (10,000 hours) GV gearheads. Noise-reduction techniques include accurate assembly to micron level. Motors provide output power levels of 6 to 60 W, depending on motor frame size, and include induction, reversible, and electromagnetic brake motors. They can be supplied as 1-phase 110/115 Vac or 220/230 Vac as well as...

Read More »
Linear Actuators/Slides offer rugged, simple design.
Actuators

Linear Actuators/Slides offer rugged, simple design.

TUFF-SERIES slides are offered in 4 sizes with strokes ranging from Â-½ to 24 in. and bore sizes from ½ to 1 ½ in. They use polymer bearings and common mounting bolt patterns. Rod-guided table slides are available with side or center mounted rodless cylinders. They feature .750 and 1.250 in. rod diameters, strokes from 1 to 36 in. and bores of 1, 1 ½, and 2 in. Each...

Read More »
Linear Motors suit medical and scanning applications.
Motors

Linear Motors suit medical and scanning applications.

Miniaturized ThrustTube Micro motor modules can be combined to create miniature x - y platforms. Motor block weighs 76 g and is constructed from polymer and epoxy to achieve accelerations of 30 G while retaining sub-micron positional accuracy. Use of polymers eliminates eddy currents in device, making motors able to achieve speeds of 10 m/sec. Modules are 60 mm wide x 48 mm high and up to 600 mm...

Read More »
Air Motor features triggerless operation.
Motors

Air Motor features triggerless operation.

Model 952 features dual-purpose air line: same line that brings compressed air to motor carries exhaust air away. When motor is pushed forward, it automatically shifts into Forward rotation. When operator pulls back, it shifts into Reverse. Motor produces 5 lb-ft of torque for expanding or cutting Â-¼ to 3/8 in. OD tubes, with maximum speed of 800 rpm. It includes ¼ in. Square Quick...

Read More »
Brake Pad Attachment meets OEM specifications.
Brakes

Brake Pad Attachment meets OEM specifications.

FeinGrip fineblanked brake pad attachment system features steel brake plate and array of integral, precisely angled teeth that lock pad to plate when friction material is molded and cured around teeth. System provides inside/outside ear-to-ear tolerance of ±0.03 mm, flatness of 0.02 mm/25 mm, and edge perpendicularity of 0.05 mm. Brake plate flatness prevents vibration and chatter under...

Read More »
Portable Power Units withstand harsh field conditions.
Hydraulic Power Units

Portable Power Units withstand harsh field conditions.

Suited for heavy-duty use with hydraulic pumps, 4700 series power units offer John Deere Power Tech Diesel engines. Welded steel frames incorporate fuel tank and have heat exchanger mounted in front of radiator. Murphy shut down system protects engine and Hydraulics System, which is able to run biodegradable oils. Available in standard and custom configurations, units' open design facilitates...

Read More »
Aligners

Laser Microgage provides machine alignment.

Microgage 2D consists of laser transmitter and square receiver. It delivers precision of 0.001 in. and can be used for measuring in 2 axial directions at same time, even when distance between laser and receiver varies as much as 70 ft or more. Processing unit provides measurement readings in X and Y axes and offers controls for zeroing readings. RS232 interface provides data for PCs and laptops....

Read More »
AC Servo Drive/Motor suits small machine tool applications.
Motor Controllers and Drives

AC Servo Drive/Motor suits small machine tool applications.

ECODRIVE Cs series system-compatible AC servo drive is offered in 100-750 W power range with 230 Vac, 1- or 3-phase power input. Unit measures 2.17 x 7.17 x 6.69 in. (W x H x D). Motor includes options for built-in holding brake, keyed output shaft, and absolute feedback. Available with various open bus interfaces, ECODRIVE Cs incorporates firmware that embodies process-oriented technologies...

Read More »
Motor provides improved heat dissipation.
Motors

Motor provides improved heat dissipation.

Based on ultrasonic standing waves, HR8EE Piezoelectric motors provide 25% more speed, force, and duty cycle than HR8 motor. HR8EE improves heat dissipation allowing for significant improvement to Envelope of Performance for use with advanced motion control and automation systems. Maximum speed increases to 350 mm/sec; maximum force increases to 45 N.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers