Gearheads and Gearboxes

In-line Planetary Gear Box replaces spur gear boxes.

UPL series in-line planetary gear box features fixed input for ease in mounting to standard NEMA 23, 34, or 42 motors. Rated for 10,000 hrs, series offers ratios up to 100:1 and low backlash of less than 15 arc-min. Product is suited for applications where low-cost synchronous or stepper motors are used. UPL-H Linear Mount Series is also available.

Read More »
Stainless Steel Motors withstand washdown environments.
Motors

Stainless Steel Motors withstand washdown environments.

Washguard® SST(TM) range from 1/3 to 2 hp and 1,750 and 3,450 rpm. All external surfaces such as frames, endbells, mounting base, fan guard, hardware, conduit box, and cover are 300 series stainless steel. Oversized, double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease. Stainless steel T-drains are provided for drainage of condensation while preventing...

Read More »
Motor/Controller Kit offers fully programmable functions.
Motors

Motor/Controller Kit offers fully programmable functions.

Simple Step 17 with Designer's Kit includes integrated motor, RS485-RS232 converter card, db-9 female connector cable, switch push button, Opto Sensor, 4-pin connector for converter card, extra wiring for I/O, and CD-ROM. Motor offers automatic execution of stored commands upon power up, fully programmable ramps and speeds, bipolar control, 2 digital I/O and 2 fixed input channels, and up to 85...

Read More »
Brushless DC Motor is suited for machine tool spindles.
Motors

Brushless DC Motor is suited for machine tool spindles.

Utilizing voltage of 370 V, 21,000 rpm motor is vibration-free due to its dual plane rotor balancing. Motor design features oversize front and rear bearings and secondary, internally-independent, Hall device tachometer arrangement. Motor measures 7 in. long with 4.875 in. dia and produces up to 14.2 lb-in. of torque at 21,000 rpm; slower speeds yield up to 15 lbs-in. of torque. Product is suited...

Read More »
Torque Limiter uses proximity sensor.
Clutches

Torque Limiter uses proximity sensor.

Torque Limiter disconnects main power source from down-stream components in event of torque overload or product jam. When overload occurs, proximity sensor embedded in air chamber sends signal to pneumatic, directional control valve to exhaust air from air chamber, which disconnects and protects system. Remote trip-torque setting with air regulator eliminates need for manual torque adjustments....

Read More »
Air Motors withstand harsh and hazardous environments.
Motors

Air Motors withstand harsh and hazardous environments.

Non-lubricated Dynatork Air Motors use air supply up to 100 psi, which is controlled through integral, rotary valve. Valve sequentially directs air to 3 pistons. Pistons drive a crank that turns outlet shaft. Resulting high torque and variable low speed, with instant start/stop output, makes motors suited for paint- and other liquid-stirring applications. Housing is cast aluminum and piston is...

Read More »
Controls and Controllers

Access-Control Panels allow customization and expansion.

Expandable in zone increments, 7200 Series Annunciators feature flexible design that can be configured from component menu to provide precise monitoring and control of hundreds of doors and zones. Annunciator panels are available in 4- and 8-zone configurations for console or rack-mounted use and can be hard wired or multiplexed. LEDs for each zone visually indicate door status. Doors can be...

Read More »
Modular Stepper Motor offers holding torque of 4 oz-in.
Motors

Modular Stepper Motor offers holding torque of 4 oz-in.

Model 3609Z measures 36 mm in diameter, 12 mm thick, and weighs 1.7 oz. Windings are encapsulated with thermally conductive, ceramic-based polymer, which allows heat to be drawn away from windings. With step accuracy of ±1.5 arc min, 0.9° motor is suited for medical, optical, and surveillance applications.

Read More »
Aligners

Digital Microgage simplifies factory alignment.

Laser Microgage 2000 checks mechanical straightness, slide and stage runout, surface flatness, machine parallelism, and mechanical squareness. It works with laser transmitter, which projects collimated laser reference beam that is captured by receiver connected to digital display. MG-2000 operates over range of a few inches to 80 ft and provides readings accurate to 0.0001 in. It can connect to...

Read More »
Actuator has 80,000+ cycle capacity.
Actuators

Actuator has 80,000+ cycle capacity.

Lighty-duty Thomson Electrak I Long Life, constructed of aluminum/zinc alloy, is equipped with fixed, mechanical limit switches and is available in 2, 4, and 6 in. stroke lengths. Acme screw drive delivers up to 75 lb of force at minimum extension speed of 0.6 ips. Series features 12 or 24 Vdc input with plug-in connector and clevis-style mounting. Self-contained, sealed actuator resists...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers