Step Motor offers holding torque to 30 oz-in.
Motors

Step Motor offers holding torque to 30 oz-in.

Available in 1.10, 1.38, and 1.54 in. lengths, 0.9Â-º NEMA size 17 High Accuracy motor is capable of holding torque ranges from 12-30 oz-in., depending on length of motor. Product has low inertia, between 0.07-0.13 oz-in.², and is available with unipolar and bipolar windings. Motor is suited for microstepping control and wherever accuracy is critical, as in automation, medical, and...

Read More »
Bearing Controller and Assemblies suit high-speed equipment.
Bearings

Bearing Controller and Assemblies suit high-speed equipment.

Providing bearing stability and precise positioning, MB240 digital control system consists of one 2 A, 40 W system with Adaptive Vibration Control. Custom-built to meet user requirements, Hyperspin spindles are multi-component magnetic bearing assemblies that incorporate radial and thrust bearings, housings, shaft, motor, and controller. Synchronous spindles are offered in speeds to 60,000 rpm...

Read More »
Smart Cylinder suits machine building applications.
Actuators

Smart Cylinder suits machine building applications.

Compliant to ISO 6431 and VDMA 24562 standards within VDMA envelope, smart cylinder contains its own sensors, flow regulators, adjustable cushioning, integrated 5/2 or 5/3 valve, and ASI Bus or Mulitpole fieldbus connections inside the casing. With integrated valve, product achieves top speed of 1.5 m/sec and is available in stroke lengths of up to 1 m. Product requires one electrical and one...

Read More »
Zone Valves and Actuators feature direct-coupled design.
Valves

Zone Valves and Actuators feature direct-coupled design.

Series 599 Zone Valve and Actuator Line offers manual override, visual position indication, and automatic reset after power interruption. Valves have all metal seating surfaces and linear stroke action for tight, secure seal. Units require no tools for installation. Actuator screws onto valve body by hand.

Read More »
Slotted DC Brushless Motors produce up to 75 oz-in. torque.
Motors

Slotted DC Brushless Motors produce up to 75 oz-in. torque.

With 2.3 in. dia and 6-slot lamination design, ELCOM ST® motors feature internal Hall sensor feedback and variable speed control. Products are available in Â-½, 1, 1½, and 2 in stack lengths and utilize neodymium-iron-boron magnets. Motors achieve speeds up to 8,000 rpm and continuous torque output up to 49 oz-in or 75 oz-in. with heat sink. Mounting configuration is consistent...

Read More »
Spring Belts provide reliable tension in hostile environments.
Belts

Spring Belts provide reliable tension in hostile environments.

Jacketed Spring Belts(TM) offer variety of flexible jacketing options including Cyclothane-A urethane, Viton, PVC, Hypalon®, and nitrile. Jackets made with Cyclothane-E urethane operate from -25 to 250°F, while silicone jackets work from -70 to 450°F. Steel spring round belts range in size from 1/8 to 3/4 in. and can be used on pulley diameters as small as 3/4 in. Connectable...

Read More »
Controls and Controllers

Valve Actuator remotely operates valves in harsh conditions.

Flexi-Drive consists of 3 elements: operator station comprised of geared handwheel and mounting facility; valve station actuator; and drive cable that links both. Cable transmits torque in excess of 280 lb-ft up to 200 ft away, accommodating 540° of bends in cable run. Designed to withstand high impact shock, sinusoidal vibration, and open flame conditions, unit can be used down to 50 ft...

Read More »
Bearings upgrade centrifugal pumps to ANSI+ standards.
Bearings

Bearings upgrade centrifugal pumps to ANSI+ standards.

Series 5300UPG MRC bearings consist of 40Â-º, double-row, angular contact ball bearings and machined brass cage. Designed as drop-in units, they eliminate need for machining and exhibit performance similar to paired single-row angular contact ball bearings. Products offer optimized axial clearance that promotes load sharing between 2 rows of balls and reduces possibility of skidding in...

Read More »
Flat Voice Coil Actuator is suited for factory automation.
Actuators

Flat Voice Coil Actuator is suited for factory automation.

Model LA05-30-001 rectangular-shaped linear actuator measures 74 x 78 x 12 mm and incorporates one housed sliding coil force arm that is supported by its own bearings. Unit has integral position sensor and can be supplied with driver. With total stroke of 0.4 in., continuous stall force of 3.4 lb, and peak force rating of 8.5 lb, two-wire, hysteresis free, cog free, direct drive linear servo...

Read More »
Linear Bearings offer two quality grades for high accuracy.
Bearings

Linear Bearings offer two quality grades for high accuracy.

Cross-Roller Precision Linear Bearings with SQ Special Quality Option have runout of no more than 5 microns over travel distance up to 1,800 mm. They withstand high demand applications such as optical measuring equipment. SSQ Super Special Quality bearings have runout of no more than 2.5 microns over travel distance of 1,200 mm, and meet stringent requirements of fiber optic splicing equipment....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers