Gearheads and Gearboxes

Servo Reducers are suited for precision applications.

With less than 6 arc-min angular backlash at output shaft, E-Servo Worm Reducers are available in 4 sizes with 32-80 mm center distance, input speeds to 5,000 rpm, and reduction ratios from 4.75-52:1. Various motor couplings and mounting flanges are available, and hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements. Applications include rotary axis...

Read More »
Gearheads and Gearboxes

Integrated Racks mount directly to linear guide rails.

Eliminating need for additional machining and alignment, Integrated Racks can be assembled to rail off of machine frame. By mounting rack and rail together, need for separate mounting surface for rail is eliminated. Drives are suited for applications such as axis drives requiring precise positioning and repeatability, traveling gantries and columns, pick and place robots, and material handling...

Read More »
Hybrid Bearings offer alternative to all-steel bearings.
Bearings

Hybrid Bearings offer alternative to all-steel bearings.

Featuring wear resistance, Hybrid Bearings combine silicon nitride rolling elements with steel rings. Inherent insulating properties prevent electrical arcing, which can cause fluting pattern surface damage to raceways. Standard types include hybrid single row, deep groove ball bearings with bore diameters from 5-110 mm; sealed and greased-for-life ball bearings protected by steel-reinforced,...

Read More »
Brushless Servomotors suit radiation-intensive applications.
Motors

Brushless Servomotors suit radiation-intensive applications.

Rated for total accumulated dose of 2 x 108 rads, RH Series is constructed with radiation-resistant materials. Models are offered in 4 standard frame sizes with continuous output torque from 15-400 lb-in. and momentary peak torque from 30-1,000 lb-in. With rotor inertia from 0.17-36.7 oz-in.Â-² and continuous output power of 700-7,800 W, radiation-hardened motors are suited for use in fuel...

Read More »
Precision Motion Actuator is vacuum-compatible.
Actuators

Precision Motion Actuator is vacuum-compatible.

NewStep(TM) NSA12V6 provides automation solution for laser and electro-optic experiments. Suited for processes operating in vacuum to 10-6 Torr, actuator enables precise motorized control of translation stages and mechanically adjustable mounts. Unit measures 60 mm long x 30 mm dia and provides up to 11 mm travel with better than 0.3 micron incremental steps at 1 mm/sec with max load of 28 N....

Read More »
Gas Turbine suits industrial applications in 6 MW range.
Electrical Power Generators

Gas Turbine suits industrial applications in 6 MW range.

Cold-end-drive, single-shaft Taurus(TM) 65 generator suits cogeneration, combined cycle, and other power generation applications. Generator set is rated at 6000 kWe for continuous duty at ISO conditions. It features 13-stage axial compressor with 15:1 pressure ratio that produces air inlet flow of 19.4 kg/sec, and utilizes 3-stage turbine with shrouded stage-3 turbine blade. SoLoNO(TM) combustion...

Read More »
Bearings

Rotary System provides high radial/axial run-out.

Ring Slide(TM) utilizes linear motion technology that eliminates need for precision machining. Curved, double sided crossed roller rail is base of system. Specially machined recirculators are mounted on rail and support load in rotary motion. Load is supported equally from all directions. Multiple recirculators can be added to increase load capacity.

Read More »
Transmission Belt reduces downtime for RPP drives.
Power Transmission and Timing Belts

Transmission Belt reduces downtime for RPP drives.

Eliminator(TM) belt, engineered to replace RPP® tooth profile belts of same width and comparable length, run on existing RPP sprockets and idlers with same tension as original belt. Polyurethane synchronous belts with green tooth color are available in 8 mm pitch size with 12, 22, 35, and 60 mm widths; 26 belt lengths; and 104 part numbers, or 14 mm pitch size with 20, 42, 65, 90, and 120...

Read More »
Modular Light Engines utilize LEDs and fiber optic panels.
Engines

Modular Light Engines utilize LEDs and fiber optic panels.

LED Light Engines combine one or more high-brightness LEDs with Lumitex® woven or UniGlo® fiber optic panel to spread light source over wide, flat area. Collimating lens captures and focuses light from LED(s) to fiber optic panel. Encased in aluminum housing, assembly achieves typical brightness of 100 Ft-L or more for 3 x 5 in. fiber optic panel illuminated by one LED. Luxeon®...

Read More »
Hydraulic Rotary Actuators operate from 145-1,000 psi.
Actuators

Hydraulic Rotary Actuators operate from 145-1,000 psi.

Series HRN/HRN-C provide up to 17,346 lb-in. output torque at 1,000 psi, depending upon model. Units incorporate round vane design with vane seal molded in pre-machined groove, providing one-piece shaft, vane, and seal assembly. Actuators offer rotations of 90° and 270°, with 180° available on Series HRN-C. Zero backlash allows for exact positioning anywhere in rotation. Series HRN-C...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers