Plain Bearings (Bushings)

Self-Clinching Bearings withstand temperatures to 540°F.

Featuring self-clinch, self-align design, high-temperature plain bearings are available in Graphite Bronze and Teflon® Bronze for commercial ovens in food operations and institutional kitchens. Bearings withstand shock, vibration, and side load and have ±5% static self-aligning capability that ensures smooth shaft rotation. Available in Â-¼, 5/16, 3/8, and ½ in. sizes,...

Read More »
Servo Motors are suited for food grade applications.
Motors

Servo Motors are suited for food grade applications.

Utilizing smooth, finless aluminum housing, Severe Duty SD-Series exceeds IP66 guidelines for complete protection against dust, strong jets of water, and effects of immersion. All other external components are 300 series stainless steel. Design minimizes possible entrapment of food particles with single-piece motor/feedback housing, while non-contact, stainless shaft seal provides protection...

Read More »
Food Grade Servo Motors are made of all-stainless steel.
Motors

Food Grade Servo Motors are made of all-stainless steel.

Suited for use in beef, poultry, dairy, and pharmaceutical industries, SS-Series All-Stainless Servo Motors utilize single-piece tubular housing and round mounting flange to eliminate potential pooling points. All external surfaces are 300 series stainless steel, and design incorporates radiused corners. Use of non-contact, stainless steel shaft seal and redundant o-ring seals protect against...

Read More »
DC Motors provide continuous torque up to 2 oz-in.
Motors

DC Motors provide continuous torque up to 2 oz-in.

Available in lengths of 1.256, 1.556, and 1.901 in. Pittman® Series 6000(TM) 22 mm brush-commutated motors utilize skewed 5-slot armature design and bonded neodymium iron boron magnets. They achieve max peak torques up to 10.2 oz-in. and speeds up to 8,550 rpm. Modular motor design enables customization with cables, shaft-mounted pulleys and gears, ball bearings, windings, optical encoders,...

Read More »
Adapters allow inductive sensors to see around corners.
Adapters

Adapters allow inductive sensors to see around corners.

Right-angle Banking Screw Adapters (BSA) enable non-contact sensors to sense around corners and stop up to 4,600 lb loads. Suited for automation applications, BSA-A devices consist of heat-treat hardened, zinc-plated alloy steel components; threaded barrel; and spring-loaded piston. Sensors trigger on/off with displacement of threaded barrel's piston. Various barrel lengths/diameters, spring...

Read More »
Actuators

Voice Coil Motors produce force from 8.1-31.5 lb.

Measuring 1.85 in. OD x 1.26 in. long, Model VM4632 produces 8.1 lb force and provides 0.4 in. stroke with 210 W input at 10% duty cycle. Continuous force reaches 2.7 lb. Measuring 3.15 in. OD x 2.13 in. long, Model VM8054 provides 31.5 lb force and develops 1.26 in. stroke with 500 W input at 10% duty cycle. Continuous force is 10.1 lb. Two intermediate motors, Models VM5042 and VM6548 develop...

Read More »
Pin and Sleeve Devices conform to IEC 309 standards.
Sleeves

Pin and Sleeve Devices conform to IEC 309 standards.

Watertight plugs, receptacles, connectors, inlets, and mechanical interlock devices provide safe electrical connections in commercial and light industrial environments subject to temperature extremes, vibration, impact, dirt, moisture, corrosive elements, and wash downs. Housings are flame retardant, impact-resistant and non-corrosive Valox and nylon material. Rated to 20, 30, 60, and 100 A,...

Read More »
Step Motor includes drive/control board.
Motors

Step Motor includes drive/control board.

MiniPak combines NEMA Size 11, 1.8° step motor with drive/control board using Trinamic TMC222 drive chip. Motor measures 1.1 in.Â-² and produces 9.2 oz-in. of holding torque. Operating from 8-29 Vdc, drive board has programmable coil current up to 800 mA and is capable of 2x-16x microstepping. It contains fixed frequency PWM current control with automatic selection of fast and slow...

Read More »
Brushless Motors achieve zero cogging.
Motors

Brushless Motors achieve zero cogging.

Frameless, Axial Airgap Series AAG offers smooth sinusoidal torque output versus angle and applies to almost any speed range. Motors can be optimized for 3-phase brushless motor controllers from 5-48 V with speeds from 0.1-20,000 rpm. Axial thickness of 5 mm can be achieved at up to 300 mm diameter. Applications include scanning equipment, inspection machines, and small integrated pumps.

Read More »
Compact SAPR Brakes are suited for mobile applications.
Brakes

Compact SAPR Brakes are suited for mobile applications.

Directly coupled to output shaft, SB brake uses spring-applied/pressure-release, wet multiple-disc technology to provide fail-safe brake capability. Wear components are immersed in fluid and environmentally sealed to prevent contamination and corrosion. Constructed with cast iron housing, case hardened steel shaft, and cylindrical bearing, product has max static load-holding capacity of 5,500...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers