Gearheads and Gearboxes

Drive Package integrates speed reducer, motor, and inverter.

Modular NORDAC® Trio SK 300E incorporates UNICASE(TM) speed reducer, motor, software, and SK 300E frequency inverter with flexible programming, built-in motor brake rectifier, and inverter braking chopper. UNICASE(TM) speed reducers are available in helical in-line, NORDBLOC® in-line, shaft-mount parallel, bevel right angle, helical-worm right angle, and worm right angle...

Read More »
Pneumatic Actuators provide automatic valve control.
Actuators

Pneumatic Actuators provide automatic valve control.

Featuring 4-piston rack and pinion design, Series PCD and PCS work with range of all-plastic, corrosion-resistant ball and butterfly valves, from Â-¼ in. ball valves up to 24 in. butterfly valves. Torque outputs range from 60-15,800 lb-in. with minimum inlet air pressure of 80 psi. Double-acting Series PCD requires air pressure for both open and close cycles, while Series PCS utilizes...

Read More »
Alloy Coating eliminates bushing turns.
Coatings

Alloy Coating eliminates bushing turns.

Intended for dozer undercarriages, SC-2 coating combines wear-resistant and corrosion-resistant properties. Extended-Life Undercarriage, featuring coated bushings uses GOPALITE(TM) process, which produces water-based slurry from heavy alloy-metal powder and several organic additives. Slurry formula suspends alloy powder and is used to apply coating to part surface, producing coating that is...

Read More »
Cotton Fiber Discs grind and finish aluminum in one step.
Fiber

Cotton Fiber Discs grind and finish aluminum in one step.

Non-loading Rex-Cut® Quick Change Discs are constructed with multiple layers of non-woven cotton fiber impregnated with aluminum oxide or silicon carbide grains. For use on flat or contoured surfaces, construction ensures products constantly reveal fresh abrasives as they grind. Discs, offered in 1, 1Â-½, 2, and 3 in. sizes, are rigid enough to get into corners and are available with...

Read More »
Actuator includes optic linear encoder and linear motor.
Actuators

Actuator includes optic linear encoder and linear motor.

Type KLM features direct drive and fully closed control, resulting in positioning accuracy of 10/500 mm Â-µm and positioning repeatability of ±0.3 µm. Unit operates at speeds up to 2.0 m/sec with accelerations reaching 4.7 g. Caged Technology employs synthetic resin cage with curvature that cradles each ball and separates it from next ball. Spaces between rolling elements...

Read More »
Rotary Actuators are offered in flange output versions.
Actuators

Rotary Actuators are offered in flange output versions.

Offered in 4 sizes, DRF DirectConnect(TM) are rotary actuators where payload mounts directly to bearing supported flange and payload inertia stops directly through independent hard stop mounted in turntable. Along with dual bearing flange support, features include magneto-resistive sensing, imperial and metric mounting, and adjustable hard stops. Series delivers payload capacity from 0.5-15 lb,...

Read More »
Gearmotor meets food industry sanitary requirements.
Motors

Gearmotor meets food industry sanitary requirements.

Ultramite SS right-angle, helical bevel gear drives feature smooth housing and C-Face mounting surfaces constructed of corrosion-resistant 316SS Stainless Steel. All unused housing holes are plugged with stainless steel caps, and nameplate information is etched into housing. Dual Lip/High Pressure Exclusion Seals keep lubrication in, while standing up to harsh chemical and high-pressure wash down...

Read More »
Gearboxes provide torque from 25-5,200 Nm.
Gearheads and Gearboxes

Gearboxes provide torque from 25-5,200 Nm.

Lubricated for life, PowerGear Gearboxes are available in 8 sizes, with 6 standard ratios from 1:1-5:1 and efficiencies to 98%. Units feature taper roller bearings, Gleason cut gears, and spheroidal graphite iron housing and flanges. They provide fretting-free torque transfer using friction-locked fit between shaft and gear. Units come with solid or hollow shafts in 2-way, 3-way, and 4-way shaft...

Read More »
Linear Actuators incorporate vertical holding brake.
Actuators

Linear Actuators incorporate vertical holding brake.

ServoTube linear actuators are available with electrically activated mechanical brake that enables products to hold vertical position with power off. Brake provides solution to power-down parking of vertical axes and controls actuator during power fail conditions. Offered as bolt-on addition, it does not expand original actuator profile and is IP67-rated. Brake is adjustment-free and has...

Read More »
Clevis-Mounted Actuator offers strokes up to 13 ft.
Actuators

Clevis-Mounted Actuator offers strokes up to 13 ft.

SuperCylinder(TM) features aluminum bronze worm gears and ground and chrome plated translating tube that slides inside polymeric bearings. Enclosure of screw by tube system shields it from environmental contaminants and retains lubricants. Offering speeds to 136 ipm and capacities to 25 tons, SuperCylinder is available in right angle configuration using motor straight into C-face adapter, and...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers