Motors

Brushless Motor can be customized to fit any application.

Able to be used with any manufacturer's amplifier and controller, MDM 5000 High Energy Brushless Motor is available with multiple voltage capabilities and includes NEMA, IEC motor mounting, or custom mechanical interfaces. CE/UL-compliant product produces up to 124 lb-in. continuous stall torque in NEMA 42 package, which is offered in 58, 85, and 110 mm sizes. Winding density is comprised of...

Read More »
Shafts

Differential Shafts rewind low-tension material rolls.

With tension control as low as 0.1 PLI, Equalizer - D4 allows converters to run ultra-thin films. Its 2-row, 12-ball, torque-activated, core-lock design ensures equalized tension across any combination of roll widths. Equalizer - D2 is suited for repeated slit-width runs with operator-positioned, toolless core stops that can be set and retained through multiple runs, while Equalizer - D3 is...

Read More »
Actuators

Moving Rod Linear Actuator develops 418 lb peak force.

Offering plug-and-play alternative to servo-controlled pneumatic cylinders, IP67-rated ServoTube actuators utilize direct electromagnetic drive for 20 micron repeatability. Products integrate non-contact Hall position sensor and lubrication-free bearings. Able to develop continuous force from 35-66 lb and peak force from 167 lb, actuators are offered with 9 stroke lengths from 33-318 mm, develop...

Read More »
Gearheads and Gearboxes

Speed Reducers have modular construction for flexibility.

Flexbloc(TM) right angle worm gear speed reducers stop oil leaks and lower operational noise due Unicase® one-piece, aluminum alloy housing. Various bolt-on components can be configured to meet specific application requirements, and choice of C-face motor adaptor or solid input shaft enables additional customization. Products are available in single, helical, or double worm configurations...

Read More »
Motors

Actuator/Motor delivers up to 12,500 lbf continuous thrust.

Combining brushless servo motor, inverted roller screw, and encoder/resolver feedback source in single assembly, Series GSX offers 3-18 in. stroke and linear speed of 40 ips. Planetary design of roller screw allows it to be accelerated at 33 ips and rotated up to 5,000 rpm faster than comparably sized ball screws. All converting components are mounted within sealed, IP65-rated motor housing....

Read More »
Motors

DC Gearmotor operates from any 36 Vdc source.

Measuring 2.14 in. in dia and 6.75 in. long, Model No. MMP-TM55-36V GP52-007 produces .85 Nm continuous torque at 700 rpm and 4.0 Nm peak. Unit requires 2.6 A @ 36 Vdc to generate full load output torque and mounts with 4 face-mount M5 threaded holes equally spaced on 40 mm dia B.C. Featuring keyed, 12 mm dia x 25 mm long output shaft, motor is rated IP 54 for operation in harsh environments and...

Read More »
Actuators

Linear Actuator is available with 31 mm metric stroke.

Captive linear actuators in Z26000 Series are offered with 31 mm stroke that is available for resolutions from 0.0127-0.1016 mm per step and offers up to 4.5 kg of force. Utilizing rare earth magnets, products enable OEMs to reduce components and simplify designs by replacing rotary motors that generate linear movement through belts and pulleys or rack and pinions with Z26000 actuators....

Read More »
Motors

Washdown Motors feature stainless steel components.

Available from Â-½-2 hp, Super-E® Motors are impervious to rust and deterioration caused by frequent high-pressure caustic sanitizing in food processing and pharmaceutical plants. Encapsulated windings and conduit box lead entry hole, utilizing E3 Effusion Epoxy Encapsulation(TM) process, stop moisture from reaching windings. Hydrophobic aspiration system prevents condensation moisture...

Read More »
Actuators

Compact Rotary Actuators feature 4-position step rotors.

Automatic models SH-5 and SH-20 can rotate in 4 adjustable steps via 4 air inlets. Weighing 0.521 kg, model SH-5 features rotational angles up to 390° at up to 240 cycles/min. Axial and radial loads are 29 and 59 N, respectively, and operating torque is 1 Nm @ 6 bar. At 1.137 kg, model SH-20 features rotational angles up to 480° at up to 180 cycles/min. Axial and radial loads are 43...

Read More »
Gearheads and Gearboxes

Ultra Flat Gearhead has zero-backlash design.

SHD Gearhead Size 14 combines harmonic drive gearing and cross roller bearing, delivering zero-backlash, 1.5 arc-min positional accuracy, and ±5 arc-sec repeatability. With 70 mm OD and 17 mm length, product has rated torque of 33 lb-in. and max torque of 310 lb-in. Available gear ratios are 50:1 and 100:1. Suited for OEM robotic applications, design enables gearhead to be incorporated into...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers