Actuators

Linear Actuator is available with 31 mm metric stroke.

Captive linear actuators in Z26000 Series are offered with 31 mm stroke that is available for resolutions from 0.0127-0.1016 mm per step and offers up to 4.5 kg of force. Utilizing rare earth magnets, products enable OEMs to reduce components and simplify designs by replacing rotary motors that generate linear movement through belts and pulleys or rack and pinions with Z26000 actuators....

Read More »
Motors

Washdown Motors feature stainless steel components.

Available from Â-½-2 hp, Super-E® Motors are impervious to rust and deterioration caused by frequent high-pressure caustic sanitizing in food processing and pharmaceutical plants. Encapsulated windings and conduit box lead entry hole, utilizing E3 Effusion Epoxy Encapsulation(TM) process, stop moisture from reaching windings. Hydrophobic aspiration system prevents condensation moisture...

Read More »
Actuators

Compact Rotary Actuators feature 4-position step rotors.

Automatic models SH-5 and SH-20 can rotate in 4 adjustable steps via 4 air inlets. Weighing 0.521 kg, model SH-5 features rotational angles up to 390° at up to 240 cycles/min. Axial and radial loads are 29 and 59 N, respectively, and operating torque is 1 Nm @ 6 bar. At 1.137 kg, model SH-20 features rotational angles up to 480° at up to 180 cycles/min. Axial and radial loads are 43...

Read More »
Gearheads and Gearboxes

Ultra Flat Gearhead has zero-backlash design.

SHD Gearhead Size 14 combines harmonic drive gearing and cross roller bearing, delivering zero-backlash, 1.5 arc-min positional accuracy, and ±5 arc-sec repeatability. With 70 mm OD and 17 mm length, product has rated torque of 33 lb-in. and max torque of 310 lb-in. Available gear ratios are 50:1 and 100:1. Suited for OEM robotic applications, design enables gearhead to be incorporated into...

Read More »
Electric Actuators produce up to 2,000 lb-in. of torque.
Actuators

Electric Actuators produce up to 2,000 lb-in. of torque.

Suited for butterfly valves up to 10 in., A Series reversible rotary actuators feature die cast aluminum housing with thermally bonded epoxy powder coating, which is rated NEMA 4X. Units include beacon position indicator and manual override. They can also be used with Type 21 ISOLATOR True Union ball valves and HC Series High Capacity ball valves. Operating voltage is 12, 24, 115, or 220 Vac, 12...

Read More »
Gear Units produce torque up to 370.000 Nm.
Gearheads and Gearboxes

Gear Units produce torque up to 370.000 Nm.

Designed for medium- and high-power transmission markets, High Power Series features configurable, space-saving design that combines S series planetary gearboxes with PIV's modular POSIRED 2 family of helical and bevel-helical gearboxes. Products come in 5 harmonically developed sizes that offer nominal torque from 37.000-370.000 Nm, transmission ratios from 100-670, and nominal power from...

Read More »
Motors

Flat Linear Motors suit point-to-point motion applications.

Featuring low-profile, iron-core design, BLMFS5 series features moving forcer coil assembly that contains Hall-effect devices and thermal sensor and has reinforced, ceramic-epoxy structure. Forcer utilizes steel laminations to produce continuous force ratings to 85 lb and peak force to 339 lb. Available with magnets used to increase output force, products produce no particulate and feature...

Read More »
Actuators

Rod Actuator offers max stroke of 130 mm.

High Thrust Rod Actuator, Type CRES, features nominal speed range from 15-55 mm/sec with nominal feeding force of 196-490 N. Rated to JIS IP55, unit is dustproof, weatherproof, and waterproof. It is suited for use in packaging machines, automatic seat positioners, panel operating mechanisms, positioning systems, height adjusters, and opening/closing mechanisms.

Read More »
Terminal Adapter suits bench testing and design work.
Adapters

Terminal Adapter suits bench testing and design work.

With max output power of 24 A, Model ZTAH offers alternative to PCB mounting of half-brick DC/DC converters. Two rows of 5 mm pitch screw and clamp terminal blocks accommodate 26-16 AWG wire. Measuring 1.69 x 2.17 in. x 0.457 in., single-sided adapter fits on top of converters by solder fit or with pluggable option and does not hinder conventional mounting of converter.

Read More »
Continuous Duty Actuator delivers smooth linear movement.
Actuators

Continuous Duty Actuator delivers smooth linear movement.

Built for use in continuous duty cycles, 7500 series actuators use oil lubricant and will not overheat. Products feature positive action from low-friction ball screw and ball nut design and perform with efficiency ratings to 70%. Available in versions rated to 10 hp max with capacities of 3,500, 12,000, and 27,000 lb, all models are offered with top plate, clevis, or threaded end mounts. Actuator...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers