Gearheads and Gearboxes

Bevel Gearboxes transmit up to 6,600 Nm.

Featuring Gleason gearing, PowerGear Models 360 and 450 measure 360 mmÂ-³ and 450 mm³ with 75 mm and 90 mm diameter drive shafts and torque transmission of 3,750 and 6,600 Nm, respectively. Both lubricated-for-life units are available with 6 gear ratios up to 5:1 and each design has solid and hollow shaft variants with up to 4-way shaft configurations. Fretting-free torque transfer...

Read More »
DC Gear Motor develops 22 lb-in. torque at 205 rpm.
Motors

DC Gear Motor develops 22 lb-in. torque at 205 rpm.

Accepting any 24 Vdc source, Model No. MMP-TM55-24V GPk52-022 produces output rated for 2.5 Nm continuous torque at 205 rpm and 9.0 Nm peak. It measures 7.25 in. long x 2.14 in. dia and has 25 mm long x 12 mm dia keyed output shaft. Mounted via 4 face mount M5 threaded holes equally spaced on 40 mm dia B.C., motor requires 3.6 A @ 24 Vdc to generate Full Load Output Torque. Unit is rated to IP54...

Read More »
Gearheads and Gearboxes

Flange Adapter streamlines material handling conveyors.

Direct-mount, worm gear speed reducer, Model CFA700 replaces heavy chain drive on material handling conveyors and is interchangeable with standard 2- and 4-bolt mounted bearings. Adapter attaches to existing side rails, so conveyor redesign is not required. Rubber mounting pads and bushing limit vibration and noise, while PosiVent® Pressure Equalization System eliminates need for...

Read More »
Motors

Brush DC Servo Motors deliver maximized continuous torque.

Suited for heavy-duty power applications, brush-commutated MAE® Series 600 achieves continuous torque up to 198 oz-in. and speeds up to 3,500 rpm. Units feature ball bearings, 4-pole stators, and 21-slot armatures to minimize magnetic cogging and enable smooth, quiet operation. Motors are suited for data storage, medical/biotech, semiconductor processing, and automation applications.

Read More »
Plain Bearings (Bushings)

Rod End Bearings have self-lubricating design.

Offered in metric sizes, threaded stem or tapped type Self-Lubricating Rod End Bearings are used in machinery controlling and linking mechanisms. Rod end body is made of zinc-plated steel; ball socket is made of bearing steel, 100 Cr6, hardened and ground; and external ring is made of bronze material. Featuring -22 to +300Â-ºF operating temperature range, products suit applications with...

Read More »
Linear Voice Coil Actuator develops peak force of 11 oz.
Actuators

Linear Voice Coil Actuator develops peak force of 11 oz.

Housed in package measuring 0.94 in. OD x 1.49 in. long, Model VM2436 provides precision bi-directional linearity over max linear stroke of 0.59 in. Unit features Teflon®-impregnated coating on core of magnet assembly, with coil assembly running directly against this surface. Actuator is suited for individual equipment requiring Z-axis drive.

Read More »
Hybrid Step Motors are protected to IP65 standards.
Motors

Hybrid Step Motors are protected to IP65 standards.

Dustproof, splashproof, aStep AS series motor and driver packages never lose synchronization due to embedded rotor position sensor that constantly monitors performance. Protective earth ground terminal is installed on metal connector to motor case, conforming to ISO 12100. At 60 mmÂ-², AS66A and AS69A develop 170.0 and 280.0 oz-in. holding torque respectively, while 80 mm² AS98A and...

Read More »
Bearings

Fixed Bearing Mounts suit ball or ACME screw applications.

Fixed rigid bearing mounts of BMF series are designed to support radial and axial load components of force, while BMR Series simple radial supports are suited for radial loads. Both series are available for common sizes of standard ACME and ball screws. Custom bearing mount solutions are also available to suit other applications.

Read More »
Automation System operates rotary on-off valves.
Automation Systems

Automation System operates rotary on-off valves.

Offering plug-and-play installation, CINTAC(TM) Advanced Automation System includes diagnostics, digital bus communication capabilities, and automated on-line emergency shutdown testing. Rack-and-pinion actuator features ISO 5211 interface for compatibility with any Â-¼ turn valve, and position sensing is done by contact-free magnetic resistive sensor. Accepting ac or dc input, sealed system...

Read More »
Actuators

Electric Linear Actuator provides feed force to 3,000 N.

Available without integrated guide mechanism, electromechanical DMES is optimized for use with MTR-DCI motor. Fine screw pitch makes lead screw inherently non-backdriveable, eliminating need for additional braking mechanism in vertical applications. In addition to lead screw integrated within body of actuator, construction features external metal sealing strip, optional dust-proof cover,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers