Motors

12mm Miniature Stepper Motor

Clearwater, Florida (December 19, 2006) - MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220 has a holding torque without current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. The ADM1220...

Read More »
Linear Actuators offer alternative to air cylinders.
Actuators

Linear Actuators offer alternative to air cylinders.

Available in Rod or Slider types, 24 V RCA Series ROBO Cylinder Actuators are fitted with AQ seals that supply lubricating oil during operation to ensure maintenance-free periods of up to 3,100 miles. Units convert revolutions of electrical motor to linear motion force. They include servo standby modes and automatic servo off modes for energy savings. Cylinders use same mounting brackets as those...

Read More »
Abrasive Wheel suits high-production pipe cleaning machines.
Wheels

Abrasive Wheel suits high-production pipe cleaning machines.

Designed for machines that must meet surface preparation requirements of pipe coating industry, Upblast EZEFIT(TM) Wheel covers 2-120 in. dia pipe sizes and offers bidirectional operation for clockwise or counterclockwise applications. It mounts in blast cabinet and is positioned under pipe to maintain close and consistent distance to underside portion of pipe. Location results in removal of...

Read More »
Students at the University of Buffalo Rely on Products from Igus to Make Their Hiding-Apparatus Project a Success
Bearings

Students at the University of Buffalo Rely on Products from Igus to Make Their Hiding-Apparatus Project a Success

EAST PROVIDENCE, R.I. - March 29, 2007 - Igus® Inc., the leading developer of iglide® plastic bearings, DryLin® linear bearings and Energy Chain Systems®, today announced that students studying architecture at the University of Buffalo used donated igubal® spherical bearings and DryLin S aluminum shafting on a unique project. The team of fifteen, which was challenged to design and...

Read More »
Miscellaneous Fixtures

Modular CMM Fixturing

EASTEC Exhibitor Product Release - 3/23/2007 Modular CMM Fixturing TE-CO now offers a complete line of modular CMM fixturing in Â-¼-20 for holding parts during inspection. Within this system, we offer fixture plates, fixture towers, a wide selection of standoffs and pin rest pads, magnetic rest pads, and soft touch clamps. Our hard coat, black anodized aluminum CMM fixture plates have...

Read More »
Turbines

GE to Provide Aeroderivative and Heavy Duty Gas Turbines for Peaking Power Plant in Kansas

HOUSTON, TEXAS-April 18, 2007-GE Energy has received contracts totaling approximately $145 million to supply four LM6000 aeroderivative gas turbines and three heavy duty Frame 7FA gas turbines to Westar Energy Inc. for a peaking-duty power plant in Emporia, Kan. Westar is building the new plant in the wake of record-setting peak power demands in Kansas last summer. We are seeing a growing demand...

Read More »
Motor Controllers and Drives

8mm Precision Zero-Backlash Spur Gearhead

Clearwater, Florida (February 1, 2007) - MicroMo Electronics, Inc. announces the addition of a metal spur zero backlash gearhead with the release of the Series 08/3. The zero backlash spur gearhead is ideal for applications requiring precision positioning with high resolution and low torque requirements. The gearhead weighs a mere 4.5 to 5.7 grams while providing a maximum continuous torque of 15...

Read More »
Direct Drive Frameless Motors have low-profile design.
Motors

Direct Drive Frameless Motors have low-profile design.

Able to achieve speeds to 10,000 rpm, ULT Series is available in sizes down to 27 mm dia with axial length as low as 8 mm and through hole up to 20 mm. Motors operate from choice of controllers, including 3-phase trapezoidal or sinusoidal motor controllers from 12-320 Vdc and sensorless motor controllers. Hall Devices and special cable/connector options are available, and areas of use include...

Read More »
Abrasive Wheels handle aggressive cleaning applications.
Wheels

Abrasive Wheels handle aggressive cleaning applications.

Engineered for cleaning of welds and removal of abrasive clogging materials, EZ Strip Non-Woven Wheels come in 4Â-½ and 7 in. diameters with 7/8 or 5/8-11 arbor holes. Red wheels are suited for finishing angled and irregular surfaces, while black wheels are intended for cleaning and satin finishes. All can be used on stainless steel, aluminum, steel, non-ferrous materials, fiberglass, and...

Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Motors

Slotted Brushless DC Servomotors suit limited-space areas.

Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMAN® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers